250G

[Pavel <gpa_net@mail.ru>]

Привет Всем!


Есть винт 250G.
Мат. плата Soltek SL-65ME+ i815E.
Биос не поддерживает LBA 48 bit и доступно только 137G.

Возможно использовать всю поверхность диска без покупки дополнительного контроллера?


#########################################################
hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
        Model Number:       SAMSUNG SP2514N                         
        Firmware Revision:  VF100-33
Standards:
        Supported: 7 6 5 4 
        Likely used: 7
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  268435455
        device size with M = 1024*1024:      131071 MBytes
        device size with M = 1000*1000:      137438 MBytes (137 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 1
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 16  Current = ?
        Recommended acoustic management value: 254, current value: 254
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6 
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4 
             Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    NOP cmd
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
           *    Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
           *    SMART feature set
           *    Mandatory FLUSH CACHE command 
           *    Device Configuration Overlay feature set 
           *    Automatic Acoustic Management feature set 
                SET MAX security extension
                SET FEATURES subcommand required to spinup after power up
                Power-Up In Standby feature set
           *    DOWNLOAD MICROCODE cmd
           *    General Purpose Logging feature set
           *    SMART self-test 
           *    SMART error logging 
Security: 
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE UNIT.
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct
###########################################################




--
Павел