flash, mount..

[sergey <srg@csu.ac.ru>]

Привет всем!
Где грабли, никогда такой проблеммы (с другими)..:
[root@sky ~]# dmesg
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usb 3-2: reset full speed USB device using address 2
  Vendor: USB       Model: BAR               Rev: 1.89
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
 sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
[root@sky ~]# mount -t vfat /dev/sda1 /mnt/sda1/
mount: /dev/sda1: can't read superblock
[root@sky ~]# dmesg
...
SCSI error : <1 0 0 0> return code = 0x10070000
end_request: I/O error, dev sda, sector 32
FAT: unable to read boot sector
[root@sky ~]# dd if=/dev/sda1 of=/tmp/ku.img
255967+0 входных записей
255967+0 выходных записей
[root@sky ~]# mount -t vfat /tmp/ku.img /mnt/sda1/ -oloop
[root@sky ~]# ls -l /mnt/sda1
итого 4
-r-xr-xr-x  1 root root  766 Мар 25  1997 a.ico
-r-xr-xr-x  1 root root   23 Ноя 28 14:31 Autorun.inf
drwxr-xr-x  4 root root 1024 Дек 22 22:50 networkS
drwxr-xr-x  3 root root 1024 Дек 23 16:58 serve
[root@sky ~]# 

Т.е. что нужно, чтоб напрямую примонтировать?

-- 
sergey <srg@csu.ac.ru>
csu