Re: usb-storage - на каком девайсе?
On Monday 23 August 2004 23:20, Vladimir Shahov wrote:
> On Mon, Aug 23, 2004 at 10:17:48PM +0400, Petrov Dmithriy wrote:
> > Ядро 2.4.26 (собранное из дебиановских сырцов)
> > Собрал usb mass storage, подключил внешний usb zip - определился, всё
> > замечательно... Но как его монтировать? Как узнать, на каком девайсе он
> > висит?
>
> dmesg|tail внимательно прочитать?
> мой mass-storage висел на /dev/sda
Эх. если бы всё было так просто.
dmesg - выдержка
hub.c: new USB device 00:11.2-1, assigned address 2
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 90
usb-storage: Array length appears to be: 92
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc13fa3d4 Out: 0xc13fa3c0 Int: 0xc13fa3e8 (Period
32)
usb-storage: New GUID 059b00320032412908522118
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 e1 cf e1 41 1c c0
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 122/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1 R 133 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: IOMEGA Model: ZIP 250 Rev: 61.T
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
blk: queue c037bce0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c037be1c, I/O limit 4095Mb (mask 0xffffffff)
И где?
Reply to: