[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Adaptec AHA-1542CF



Greetings...

Никак не могу сабж заставить заработать под Woody :(
Motherboard: i440ZX; Kernel: 2.2.20
Он ISA-овский, а его PCI-ный анлог AHA-2940U подымается даже без пинка.
Загрузка длится до безобразия долго при этом наблюдаются сообщения:

Mar 24 14:50:51 imp kernel: Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 11, DMA priority 5
Mar 24 14:50:51 imp kernel: scsi: <fdomain> Detection failed (no card)
Mar 24 14:50:51 imp kernel: NCR53c406a: no available ports found
Mar 24 14:50:51 imp kernel: sym53c416.c: Version 1.0.0
Mar 24 14:50:51 imp kernel: Failed initialization of WD-7000 SCSI card!
Mar 24 14:50:51 imp kernel: IBM MCA SCSI: Version 3.2
Mar 24 14:50:51 imp kernel: IBM MCA SCSI: No Microchannel-bus present --> Aborting.
Mar 24 14:50:51 imp kernel:               This machine does not have any IBM MCA-bus
Mar 24 14:50:51 imp kernel:               or the MCA-Kernel-support is not enabled!
Mar 24 14:50:51 imp kernel: megaraid: v1.11 (Aug 23, 2000)
Mar 24 14:50:51 imp kernel: aec671x_detect: 
Mar 24 14:50:51 imp kernel: 3ware Storage Controller device driver for Linux v1.02.00.008.
Mar 24 14:50:51 imp kernel: 3w-xxxx: tw_findcards(): No cards found.
Mar 24 14:50:51 imp kernel: scsi0 : Adaptec 1542
Mar 24 14:50:51 imp kernel: scsi : 1 host.
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel: aha1542.c: Trying device reset for target 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel: Sent BUS RESET to scsi host 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel: aha1542.c: Trying device reset for target 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel: Sent BUS RESET to scsi host 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 0
Mar 24 14:50:51 imp kernel:   Vendor:           Model:                   Rev:     
Mar 24 14:50:51 imp kernel:   Type:   Direct-Access                      ANSI SCSI revision: 00
Mar 24 14:50:51 imp kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 1
Mar 24 14:50:51 imp kernel: aha1542.c: Trying device reset for target 1
Mar 24 14:50:51 imp kernel: aha1542.c: Unable to abort command for target 1
Mar 24 14:50:51 imp kernel: Sent BUS RESET to scsi host 0   

И так далее по всем 6-ми target-ам... Как его побороть?

-- 
Regards...

 +----------------------------------------------
 | Oles' Stovbenko aka $LY Lord of GloomDaemons
 +----------------------------------------------
 | Registered Linux User # : 232886
 | ICQ UIN                 : 27308195
 | NIC-Handle              : OS11-UANIC



Reply to: