apcupsd

[Konstantin Kubatkin <cat@3logic.net>]

У меня вопрос по subj - прописанно выполнение команды в PWRCMD, но при
пропадании питания она не выполняется :(
Используется Debian 2.2, конфиги прилагаются

-- 
Konstantin Kubatkin
KK4501-RIPE, Kherson, TriLogiC Group
Fido: 2:468/0@FidoNet

## apcupsd.conf v1.0 ##
#
# "apcupsd" POSIX config file
# Updated for Debian/GNU Linux by Leon Breedt (ljb@debian.org)

# CONTROL <string>
CONTROL /usr/sbin/powersc

# UPSCABLE [ simple | smart |
#            940-00(20B,23A,24B,24C,24G,95A,95C) |
#            940-15(24C) |
#            ether ]
#
UPSCABLE 940-0024C

# UPSTYPE [ backups | sharebasic | netups |
#           backupspro | smartvsups |
#           newbackupspro | backupspropnp |
#           smartups | matrixups | sharesmart ]
#
UPSTYPE smartups

# UPSCLASS [ standalone | shareslave | sharemaster | netslave | netmaster ]
UPSCLASS netmaster

# UPSMODE [ disable | share | net | sharenet ]
UPSMODE net

#DEVICE <string> /dev/<serial port>
DEVICE /dev/ttyS0

#LOCKFILE <path to lockfile>
LOCKFILE /var/lock

#ACCESS <string> [ true | false ] Enable Access Support
ACCESS true

# ANNOY <int> <30> <0> disables
ANNOY 30

# DELAY <int> <60> <0> disables
DELAY 60

# NOLOGON <string> [ disable | timeout | percent | minutes | always ]
NOLOGON timeout

# PROCFS <int> <120> <0> disables <update rate procfs-type of current status>
PROCFS 30

# LOGGING <int> <500> <0> disables <rate update log file of current status>
LOGGING 300

# TIMEOUT <time is seconds to run on UPS, powerfails>
# TIMEOUT 900


# BATTERYLEVEL <precent of battery charge for shutdown> 10
BATTERYLEVEL 10

# MINUTES <time in minutes of remainning battery charge before shutdown> 5
MINUTES 5

# SENSITIVITY <char> H,M,L default H
SENSITIVITY L

# WAKEUP <int> 0,60,180,300 Cycles default 0
WAKEUP 60

# SLEEP <int> 20,180,300,600 Cycles default 20
SLEEP 20

# LOTRANSFER <int> 0,1,2,3 default 2
LOTRANSFER 1

# HITRANSFER <int> 0,1,2,3 default 2
HITRANSFER 3

# RETURNCHARGE <int> 0,1,2,3 default 3
RETURNCHARGE 1

# BEEPSTATE <char> 0,T,L,N default 0
BEEPSTATE L

# SELFTEST <string> 336,168,ON,OFF default 336
SELFTEST 336
#
# UPSNAME <string>
UPSNAME Phuntic

# REPLACE <string> date format mm/dd/yy
#REPLACE 12/13/93

# BATTCMD <string>
BATTCMD /etc/ups/ups_bat_low

# TIMECMD <string>
#TIMECMD 

# LOADCMD <string>
#LOADCMD 

# LIMITCMD <string>
#LIMITCMD

# PWRCMD <string>
PWRCMD /etc/ups/ups_power_fail

# RETCMD <string>
RETCMD /etc/ups/ups_power_ret

# REMOTECMD <string>
#REMOTECMD

# NETTIME <int>
NETTIME 60

# NETPORT <int>
NETPORT 6666

# MASTER <string>
#MASTER

# SLAVE <string>
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE

# USERMAGIC <string>
#USERMAGIC

# HTTPACCESS [ true | false ]   enable web-interface - defaults to false
HTTPACCESS true

# HTTPPORT <port>  port to use for interface - defaults to 1999
HTTPPORT 1999

APC      : Oct 27 14:05:56
CABLE    : APC Cable 940-0024C
UPSMODEL : SMART-UPS 2200
UPSMODE  : Net Master
SHARE    : NetworkUPS
UPSNAME  : UPS_IDEN
ULINE    : 214.5 Volts
MLINE    : 222.3 Volts
NLINE    : 213.2 Volts
FLINE    : 49.2 Hz
VOUTP    : 214.5 Volts
LOUTP    : 059.2 Load Capacity
BOUTP    : 55.0 Volts
BCHAR    : 091.0 Batt. Charge
TIME     : 17.0 Minutes
SENSE    : LOW
WAKEUP   : 060 Cycles
SLEEP    : 020 Cycles
LOTRANS  : 188.0 Volts
HITRANS  : 280.0 Volts
CHARGE   : 015.0 Percent
BFAIL    : 0x08 Status Flag
UTEMP    : 38.7 C Internal
ALARM    : Low Batt
LASTEVNT : LINE VOLTAGE DECREASE
LOWBATT  : 02 Minutes
DIPSW    : 0x0000