cdrecord
Кто-то может подсказать, почему cdrecord не может писать
multisession cd.
Все обкопал, но ничего нарыть не могу ... :-(
Сообщения и ошибки при записи прилагаються.
--
Sergey Latyshev Aka Lizard
SL3572-RIPE, Kherson, TriLogiC Group, Ltd.
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 JЖrg Schilling
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8200 '
Revision : '1.0f'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 2086656 = 2037 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 121 MB
Total size: 139 MB (13:49.13) = 62185 sectors
Lout start: 139 MB (13:51/10) = 62185 sectors
Current Secsize: -1
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 336075 (74:43/00)
speed low: 0 speed high: 4
power mult factor: 3 5
recommended erase/write power: 3
A2 values: 5C C6 26
Disk type: phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 273890
Starting to write CD/DVD at speed 4 in dummy mode for multi session.
Last chance to quit, starting dummy write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
CDB: 55 10 00 00 00 00 00 00 3C 00
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 8B
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 3 (valid) field ptr 0
cmd finished after 0.008s timeout 40s
Mode Select Data 00 21 00 00 05 32 11 C4 08 00 00 00 20 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
cdrecord: Warning: using default CD write parameter data.
cdrecord: Cannot open new session.
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Reply to: