Hi
I would like to upload linux version 6.7.7-1 to unstable over the
weekend. The new upload would consist of a new upstream version
switching to the 6.7.y series in unstable.
Apart from switching from 6.6.y to 6.7.y series there are additional
changes covering:
* Enable CONFIG_MFD_RK8XX_SPI for RK3588 SoC
- MFD_RK8XX_SPI as built-in, same behavior as MFD_RK8XX_I2C
* [armhf] Enable DRM_PANEL_MIPI_DBI as a module for
stm32mp157c-lxa-tac-gen2.
* Backport a patch from v6.8-rc1 to be more verbose about pending deferred
probes helping debugging of failed boot attempts.
* [arm64] Make PINCTRL_ROCKCHIP builtin.
* [x86] drivers/hwmon: Enable SENSORS_HP_WMI as module (Closes: #1064507)
* [loong64] Build kernel image and udebs for loong64 (Closes: #1053650)
The following were already included in earlier experimental uploads:
* [riscv64] Add clock, MFD, PCIe PHYs, regulator and RTC drivers to
kernel-image udeb.
* [riscv64] Disable CRYPTO_DEV_JH7110, it is broken.
* Make linux-libc-dev provide all cross packages.
* Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
(Closes: #1061521)
* [arm64] drivers/thermal/qcom: enable QCOM_SPMI_ADC_TM5 as module for
thermal throttling on the Lenovo ThinkPad X13s.
* drivers/hwmon: Enable SENSORS_IIO_HWMON as module (Closes: #1057272)
* Enable bcachefs filesystem support
- fs/bcachefs: Enable BCACHEFS_FS as module
- fs/bcachefs: Enable BCACHEFS_QUOTA
- fs/bcachefs: Enable BCACHEFS_POSIX_ACL
* media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)
* [riscv64] Enable ARCH_SOPHGO and ARCH_THEAD.
* [riscv64] Disable ARCH_R9A07G043 as it now depends on NONPORTABLE.
* [riscv64] Enable PHY_STARFIVE_JH7110_DPHY_RX, PHY_STARFIVE_JH7110_PCIE and
PHY_STARFIVE_JH7110_USB as modules.
* [powerpc,ppc64,ppc64el] Drop ipddp from nic-modules.
* [riscv64] Enable LEDS_PWM and LEDS_PWM_MULTICOLOR as modules.
* [arm64, armhf] drivers/net/phy: Enable ADIN_PHY as module
(Closes: #1043354)
* [arm64] Enable CSI camera stack for i.MX8M SoCs (Closes: #1055442)
* Enable configs for MT8195 Chromebooks:
- COMMON_CLK_MT8195 as built-in
- COMMON_CLK_MT8195_APUSYS, COMMON_CLK_MT8195_AUDSYS,
COMMON_CLK_MT8195_IMP_IIC_WRAP, COMMON_CLK_MT8195_MFGCFG,
COMMON_CLK_MT8195_MSDC, COMMON_CLK_MT8195_SCP_ADSP,
COMMON_CLK_MT8195_VDOSYS, COMMON_CLK_MT8195_VPPSYS,
COMMON_CLK_MT8195_CAMSYS, COMMON_CLK_MT8195_IMGSYS,
COMMON_CLK_MT8195_WPESYS, COMMON_CLK_MT8195_VDECSYS,
COMMON_CLK_MT8195_VENCSYS as modules
- MFD_MT6360, REGULATOR_MT6315, REGULATOR_MT6359,
REGULATOR_CROS_EC, MTK_LVTS_THERMAL as modules
- MTK_ADSP_MBOX, MTK_ADSP_IPC, SND_SOC_SOF_OF, SND_SOC_MT8195,
SND_SOC_MT8195_MT6359, SND_SOC_SOF_MT8195 as modules
- SND_SOC_SOF_TOPLEVEL, SND_SOC_SOF_MTK_TOPLEVEL as built-in
- DRM_MEDIATEK_DP, PHY_MTK_DP, PHY_MTK_PCIE, PHY_MTK_UFS as modules
- PINCTRL_MT8195, PCIE_MEDIATEK_GEN3, SPMI_MTK_PMIF as built-in
* [arm64] drivers/rtc: Enable RTC_DRV_RS5C372 as module
* Revert "Run dh_movetousr also in signed images."
* Fix config specified CFLAGS on kernel builds. Also drop old definitions
that have not worked for a long time.
* Disable ability to do binNMU. The Debian infrastructure is not ready
to binNMU signed packages. But they instead just break the dependencies
within this package.
* Restructure and cleanup complete config:
- Uses TOML instead of our home-grown INI based format.
- Don't export a config dump anymore, it is not longer in use.
* Generate and ship vmlinux.h in linux-headers package.
* [arm64] Set QCOM_QSEECOM and QCOM_QSEECOM_UEFISECAPP to 'y' in order to
add support for EFI variables on the Lenovo X13s.
* [arm64] Support HDMI output on TI SK-AM62. Enable DRM_SII902X and
DRM_TIDSS as modules.
* [arm64] udeb: Include sun8i-drm-hdmi module in installer
(Closes: #1050315)
* Generate separate package tests for every flavour.
* Fix stripping of vmlinux binaries. (closes: #1059713)
* Ignore vmlinux for shlibs. (closes: #1059676)
* Drop not working selftests. (closes: #1059765)
* Always build with CROSS_COMPILE set.
* Run dh_movetousr also in signed images.
* Fix some remaining cross build problems.
* Enable MODULE_DECOMPRESS
* [ppc64] Build PowerNV PCIe hotplug driver as a module
* [riscv64] udeb: Add efi-modules and xfs-modules.
* [arm64] Add support for NXP i.MX8M PCIe
- drivers/phy/freescale: Enable PHY_FSL_IMX8M_PCIE as module
I hope it's not too much controversial to make this switch now to the 6.7.y
series.
Regards,
Salvatore
Attachment:
signature.asc
Description: PGP signature