Hi
I would like to upload linux version 6.5.3-1 later today to unstable.
The new upload would consist of a new upstream version switching to
the 6.5.y series in unstable. An ABi bump is included.
The new upload fixes CVE-2023-4623 and CVE-2023-25775.
Apart from switching from 6.4.y to 6.5.y series there are additional
changes covering:
* Enable KFENCE support (not enabled by default) (Closes: #1025845)
* net/xdp: Enable XDP_SOCKETS_DIAG as module (Closes: #1051455)
* udeb: Make MPT modules optional in scsi-modules (fixes FTBFS on s390x)
(Closes: #1051249)
* Refresh "radeon, amdgpu: Firmware is required for DRM and KMS on R600
onward"
* Set ABI to 1
* [rt] Update to 6.5.2-rt8
* [arm64] Add reset-rzg2l-usbphy-ctrl to usb-modules udeb in order to enable
USB support on Renesas RZ/G2L-SMARC boards.
* [arm64,armhf] drivers/hwspinlock: Enable CONFIG_HWSPINLOCK
* [arm64] Add support for Lenovo ThinkPad X13s: enable as modules
SC_DISPCC_8280XP, SC_GCC_8280XP, SC_GPUCC_8280XP, QCOM_SPMI_ADC5,
INTERCONNECT_QCOM_OSM_L3, INTERCONNECT_QCOM_SC8280XP, LEDS_QCOM_LPG,
QCOM_IPCC, QCOM_FASTRPC, NVMEM_SPMI_SDAM, PHY_QCOM_EDP, PHY_QCOM_QMP_PCIE,
PHY_QCOM_USB_SNPS_FEMTO_V2, PINCTRL_SC8280XP, PINCTRL_SC8280XP_LPASS_LPI,
PINCTRL_LPASS_LPI, POWER_RESET_QCOM_PON, BATTERY_QCOM_BATTMGR,
QCOM_Q6V5_ADSP, QCOM_Q6V5_PAS, QCOM_Q6V5_WCSS, QCOM_SYSMON, QCOM_LLCC,
QCOM_OCMEM, QCOM_PMIC_GLINK, QCOM_STATS, QCOM_APR, QCOM_ICC_BWMON,
SPI_QCOM_GENI, TYPEC_MUX_GPIO_SBU, QRTR_SMD, SND_SOC_WCD938X_SDW,
SND_SOC_LPASS_WSA_MACRO, SND_SOC_LPASS_VA_MACRO, SND_SOC_LPASS_RX_MACRO,
SND_SOC_LPASS_TX_MACRO, SND_SOC_QDSP6
(Thanks Steve Capper!)
* [arm64] Add Thinkpad X13s modules to udebs
* drivers/char/hw_random: Change HW_RANDOM from module to built-in
(Closes: #1041007)
* drivers/char/tpm: Do not explicitly set HW_RANDOM_TPM
* [arm64, cloud, x86] drivers/char/tpm: Do not explicitly enable TCG_TPM
* [arm*,ppc64*,sparc64,s390x] drivers/char/hw_random: Prevent some HW Random
Number Generator drivers from being built-in
And the following already included in experimental uploads up to
6.5.1-1~exp1:
* [riscv64] enable cpufreq support for Starfive JH7110: enable CPUFREQ_DT,
MFD_AXP20X_I2C and REGULATOR_AXP20X as modules, and CPUFREQ_DT_PLATDEV as
built-in.
* [armel/rpi,armhf,arm64] enable CPUFREQ_DT_PLATDEV as built-in, as it does
not get autoloaded as a module (Closes: #1050587)
* Use pytest to test some of the code.
* Re-add /usr/include/drm and /usr/include/scsi to linux-libc-dev; they
don't longer conflict with other packages. (closes: #1050368)
* Properly split host and build flags. (closes: #1050991)
* [x86] drivers/hwtracing/intel_th: Enable INTEL_TH_ACPI Intel Trace Hub
ACPI controller as module (Closes: #1050342)
* [amd64] arch/x86/ras: Enable RAS_CEC (Correctable Errors Collector)
(Closes: #1050940)
* [arm64] sound/pci: Enable SND_CMIPCI as a module
* linux-image: bug: Update taint list and use upstream descriptions
* [rt] Refresh "serial: 8250: implement non-BKL console"
* [amd64] mm: Enable MEMORY_HOTPLUG_DEFAULT_ONLINE: Enable Online the newly
added memory blocks by default (Closes: #1049901)
* [hppa] Add build-dependency on binutils-dev to get bfd.h and thus allow
disassembly of jitted programs in bpftool
* [riscv64] enable CONFIG_ACPI
* [riscv64] improve Starfive JH7110 support: enable CRYPTO_DEV_JH7110,
SND_SOC, SND_SOC_STARFIVE and SND_SOC_JH7110_TDM as modules
* [x86] drivers/platform/x86/lenovo-ymc: Enable LENOVO_YMC as module
* [arm64] Improve support for Allwinner H6 and affiliated SoCs
(Closes: #1038986)
- drivers/cpufreq: Enable ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM as module
- drivers/iommu: Enable SUN50I_IOMMU
- drivers/media/rc: Enable IR_SUNXI as module
- drivers/phy/allwinner: Enable PHY_SUN50I_USB3 as module
- sound/soc/sunxi: Enable SND_SUN50I_DMIC as module
Regards,
Salvatore
Attachment:
signature.asc
Description: PGP signature