Consider jed_0.99.18-7 for etch
I just uploaded jed_0.99.18-8 to unstable. Please consider hinting this
version into etch since it fixes three l10n bug reports (#395251, #400510,
and #405744) and also added an updated pt_BR translation. I am following
the request sent by Javier Fernández-Sanguino Peña in d-d-a [1].
The version currently in testing is jed_0.99.18-6. I am attaching below the
diff between -6 and -8. Notice that two changes made in -7 were reverted in
-8, namely the introduction of the fix-pymode-tab-space dpatch and the
renaming of the info files (which was a mistake). Consequently, the -8
version contains only changes related to the l10n of the debconf question,
as well as fixes that make the deconf script really work.
Thanks,
--
Rafael, in behalf of the Debian JED Group
[1] http://lists.debian.org/debian-devel-announce/2007/01/msg00002.html
Index: debian/control
===================================================================
--- debian/control (.../0.99.18-6) (revision 497)
+++ debian/control (.../0.99.18-8) (revision 497)
@@ -5,7 +5,9 @@
Uploaders: Rafael Laboissiere <rafael@debian.org>
Standards-Version: 3.7.2
Build-Depends-Indep: hevea
-Build-Depends: debhelper (>= 4.1.16), dpatch, libgpmg1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libslang2-dev, libxft-dev, libxt-dev, pkg-config
+Build-Depends: debhelper (>= 4.1.16), dpatch, libslang2-dev, libxft-dev,
+ libgpmg1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libxt-dev,
+ pkg-config
Package: jed
Architecture: any
@@ -73,7 +75,7 @@
Replaces: jed-sl
Conflicts: jed-sl, jed (<< ${Source-Version}), xjed (<< ${Source-Version})
Recommends: jed | xjed
-Depends: debconf | debconf-2.0, findutils (>= 4.1.20-6)
+Depends: findutils (>= 4.1.20-6), debconf | debconf-2.0
Description: S-Lang runtime files for jed and xjed
Jed is a small, fast and powerful text editor.
.
Index: debian/changelog
===================================================================
--- debian/changelog (.../0.99.18-6) (revision 497)
+++ debian/changelog (.../0.99.18-8) (revision 497)
@@ -1,3 +1,53 @@
+jed (0.99.18-8) unstable; urgency=low
+
+ * debian/po/sv.po: Adjusted msgid strings to correspond to those in
+ po/templates.pot, otherwise po2debconf will not include the sv
+ translations [RL]
+
+ * debian/po/pt_BR.po: Updated file [RL]
+ * debian/po/pt.po: Added the last question which was lacking in the
+ translation (really closes: #400510) [RL]
+
+ * debian/jed-common.config: Made this debconf script works as expected
+ [RL & JS]
+ * debian/jed-common.preinst: Removed file [RL]
+ * debian/control: Since the preinst script is gone, moved debconf from
+ Pre-Depends to Depends for jed-common [RL]
+
+ * debian/rules: Reverted the change in last release regarding the
+ naming of the upstream info files. We have been informed that
+ Lintian will not complain about this in the future and,
+ apparently, it is not really a Policy violation [RL]
+
+ * debian/patches/fix-pymode-tab-space.dpatch: Dropped this patch for now,
+ until a consensus is reached on how it should be implemented [RL]
+ * debian/patches/pymode-repeat-shift.dpatch: Dropped this patch also,
+ since it depends on fix-pymode-tab-space [RL]
+
+ -- Rafael Laboissiere <rafael@debian.org> Sun, 14 Jan 2007 11:43:30 +0100
+
+jed (0.99.18-7) unstable; urgency=low
+
+ * po/nl.po: Added the translation into Dutch of the deconf messages.
+ Thanks to Vincent Zweije (closes: #395251) [JS]
+
+ * control: Moved debhelper dependency to the Pre-Depends field, because
+ we need debhelper in the preinst script. [JS]
+
+ * po/pt.po: Added the translation into Portuguese of the deconf messages.
+ Thanks to Miguel Figueiredo (closes: #400510) [JS]
+
+ * po/ru.po: Added the translation into Russian of the deconf messages.
+ Thanks to Yuri Kozlov (closes: #405744) [JS]
+
+ * patches/fix-pymode-tab-space.dpatch: Improved the patch to cover the
+ cases Günther Milde has reported. Thanks Günther (closes: #305668) [JS]
+
+ * rules: Rename the upstream info files from jed.*in into jed.info-*, as
+ required by section 12.2 of the Debian Policy [RL]
+
+ -- Rafael Laboissiere <rafael@debian.org> Tue, 9 Jan 2007 17:00:10 +0100
+
jed (0.99.18-6) unstable; urgency=low
* debian/patches/pymode-repeat-shift.dpatch: Added a patch to make the
Index: debian/patches/fix-pymode-tab-space.dpatch
===================================================================
--- debian/patches/fix-pymode-tab-space.dpatch (.../0.99.18-6) (revision 497)
+++ debian/patches/fix-pymode-tab-space.dpatch (.../0.99.18-8) (revision 497)
@@ -4,12 +4,35 @@
## DP: In Python, it is forbidden to mix up tabs and spaces as indention
## DP: characters. This patch enhances the python mode to take care of the
## DP: prefered indention character in a file. Fixes #305668
+##
+## The idea of the patch is to assume the user wants tabs as indent characters,
+## if he set the Py_Indent_Level to the value of TAB. (used for empty files)
+## This might be overwritten by the indention character used in the current
+## file. If the first line that starts with whitespace and is not part of """
+## ... """ or starts with # it overwrites the default selection. If this line
+## starts with a tab, tab is used as character for indention, otherwise spaces
+## are used.
@DPATCH@
diff -urNad trunk~/lib/pymode.sl trunk/lib/pymode.sl
--- trunk~/lib/pymode.sl (Revision 35)
+++ trunk/lib/pymode.sl (Arbeitskopie)
-@@ -139,10 +139,16 @@
+@@ -69,6 +69,14 @@
+
+
+
++private define py_whitespace(cnt)
++{
++ if ( get_blocal_var("py_use_tab") )
++ whitespace(cnt);
++ else
++ loop (cnt) insert_char(' ');
++}
++
+ % Set the following to your favourite indentation level
+ custom_variable("Py_Indent_Level", 4);
+
+@@ -139,10 +147,16 @@
col = what_column() - 1;
@@ -28,17 +51,16 @@
}
define py_indent_line()
-@@ -151,6 +157,9 @@
+@@ -151,7 +165,7 @@
col = py_indent_calculate();
bol_trim ();
-+ if ( get_blocal_var("py_use_tab") )
-+ loop (col / TAB) insert_char('\t');
-+ else
- whitespace( col );
+- whitespace( col );
++ py_whitespace( col );
}
-@@ -246,11 +255,19 @@
+ define py_comment_line()
+@@ -246,11 +260,19 @@
bskip_white();
if (bolp() and (col > 1)) {
pop_spot();
@@ -53,22 +75,22 @@
col--;
if (col mod Py_Indent_Level == 0)
col--;
- whitespace ( (col / Py_Indent_Level) * Py_Indent_Level );
+- whitespace ( (col / Py_Indent_Level) * Py_Indent_Level );
++ py_whitespace ( (col / Py_Indent_Level) * Py_Indent_Level );
+ }
}
else {
pop_spot();
-@@ -261,6 +278,9 @@
+@@ -261,7 +283,7 @@
define py_shift_line_right()
{
bol_skip_white();
-+ if ( get_blocal_var("py_use_tab") )
-+ insert_char('\t');
-+ else
- whitespace(Py_Indent_Level);
+- whitespace(Py_Indent_Level);
++ py_whitespace(Py_Indent_Level);
}
-@@ -293,9 +313,17 @@
+ define py_shift_region_right()
+@@ -293,9 +315,17 @@
{
bol_skip_white();
if (what_column() > Py_Indent_Level) {
@@ -86,25 +108,22 @@
}
}
-@@ -440,11 +468,17 @@
+@@ -440,12 +470,12 @@
% Indent is wrong. Hopefully it's a continuation line.
level = oldlevel; % reset level
bol_trim();
-+ if ( get_blocal_var("py_use_tab") )
-+ loop (level) insert_char('\t');
-+ else
- whitespace(level * Py_Indent_Level + (col - current_indent));
+- whitespace(level * Py_Indent_Level + (col - current_indent));
++ py_whitespace(level * Py_Indent_Level + (col - current_indent));
} else {
current_indent = col;
indent_level[level] = col;
bol_trim();
-+ if ( get_blocal_var("py_use_tab") )
-+ loop (level) insert_char('\t');
-+ else
- whitespace(level * Py_Indent_Level);
+- whitespace(level * Py_Indent_Level);
++ py_whitespace(level * Py_Indent_Level);
}
} while (down(1) == 1);
-@@ -578,12 +612,29 @@
+ }
+@@ -578,12 +608,28 @@
{
variable python = "python";
@@ -129,7 +148,6 @@
+ else
+ !if (looking_at_char('#') or eolp() or what_column() == 1)
+ {
-+ message("foo" + string(what_line()));
+ bol();
+ set_blocal_var(looking_at_char('\t'), "py_use_tab");
+ break;
Index: debian/patches/pymode-repeat-shift.dpatch
===================================================================
--- debian/patches/pymode-repeat-shift.dpatch (.../0.99.18-6) (revision 497)
+++ debian/patches/pymode-repeat-shift.dpatch (.../0.99.18-8) (revision 497)
@@ -9,18 +9,14 @@
diff -urNad trunk~/lib/pymode.sl trunk/lib/pymode.sl
--- trunk~/lib/pymode.sl 2006-09-19 13:38:27.201564732 +0200
+++ trunk/lib/pymode.sl 2006-09-19 13:39:22.477564732 +0200
-@@ -274,21 +274,26 @@
+@@ -279,18 +279,21 @@
define py_shift_line_right()
{
+ variable times = prefix_argument(1);
bol_skip_white();
- if ( get_blocal_var("py_use_tab") )
-+ loop (times)
- insert_char('\t');
- else
-+ loop (times)
- whitespace(Py_Indent_Level);
+- py_whitespace(Py_Indent_Level);
++ py_whitespace(times * Py_Indent_Level);
}
define py_shift_region_right()
@@ -36,7 +32,7 @@
py_shift_line_right();
go_down_1 ();
}
-@@ -308,17 +313,18 @@
+@@ -310,17 +313,18 @@
define py_shift_line_left()
{
@@ -59,7 +55,7 @@
del_region();
}
}
-@@ -326,6 +332,7 @@
+@@ -328,6 +332,7 @@
define py_shift_region_left()
{
@@ -67,7 +63,7 @@
variable n;
check_region (1);
-@@ -333,6 +340,7 @@
+@@ -335,6 +340,7 @@
pop_mark_1 ();
loop (n - what_line ())
{
Index: debian/patches/00list
===================================================================
--- debian/patches/00list (.../0.99.18-6) (revision 497)
+++ debian/patches/00list (.../0.99.18-8) (revision 497)
@@ -15,5 +15,3 @@
fix-pymode-block-end
doc
-fix-pymode-tab-space
-pymode-repeat-shift /* depends on fix-pymode-tab-space */
Index: debian/rules
===================================================================
--- debian/rules (.../0.99.18-6) (revision 497)
+++ debian/rules (.../0.99.18-8) (revision 497)
@@ -43,7 +43,7 @@
# These settings of DL_LIB, OTHERLIBS and XRENDERFONTLIBS are to get
# right of unnecessary dependencies on libraries.
# http://rerun.lefant.net/checklib/
- #
+ #
# DL_LIB introduces a dependency on libdl that is already solved by
# libc. OTHERLIBS introduces a dependency on libm that is also solved
# by libc. XRENDERFONTLIBS fixes a problem with libxft-dev that defines
@@ -161,7 +161,7 @@
binary: binary-arch binary-indep
-get-orig-source:
+get-orig-source:
wget ftp://space.mit.edu/pub/davis/jed/v0.99/jed-$(UPSTREAM_VERSION).tar.gz
mv jed-$(UPSTREAM_VERSION).tar.gz jed_$(UPSTREAM_VERSION).orig.tar.gz
Index: debian/jed-common.config
===================================================================
--- debian/jed-common.config (.../0.99.18-6) (revision 497)
+++ debian/jed-common.config (.../0.99.18-8) (revision 497)
@@ -2,24 +2,60 @@
set -e
-. /usr/share/debconf/confmodule
+# md5sums from jed-0.99.9 (potato)
+file_1=38af7aa6498bfd7be927aa52c6c46585:/etc/jed-init.d/00site.sl
+file_2=91a5aee61e23906dcfffd24904d7ef62:/etc/jed-init.d/99default.sl
-if [ -e /etc/jed-init.d/00site.sl ] ||
- [ -e /etc/jed-init.d/99defaults.sl ]; then
+# md5sums from jed-0.99.15-5 (woody)
+file_3=ce466753801194229b9b78f0b3b7e28c:/etc/jed-init.d/00site.sl
+file_4=5f0954b045b6b81f1ef0ba545d42c000:/etc/jed.conf
- # the md5sums posted by Rafael on pkg-jed-devel@l.a.d.o
- if ( [ -e /etc/jed-init.d/00site.sl ] &&
- echo '2e00fef46fcee03fe504cea3b58510b6 /etc/jed-init.d/00site.sl' |
- md5sum -c 2>/dev/null ) ||
- ( [ -e /etc/jed-init.d/99defaults.sl ] &&
- echo '1514586554dfe5aefcee84aa967fb01b /etc/jed-init.d/99default.sl' |
- md5sum -c 2>/dev/null )
- then
- db_input medium jed-common/rm-site-defaults || true
- else
- # they aren't modified
- db_set jed-common/rm-site-defaults true
+# md5sums from SVN revisions 2 to 35
+file_5=5bf498a3703c5330e3acea00d0fa7a87:/etc/jed-init.d/00debian.sl
+
+# md5sums from SVN revisions 36 to 41
+file_6=28962c5ff0ff7cfcc58a22394599967e:/etc/jed-init.d/00debian.sl
+
+# md5sums from SVN revisions 42 to 55
+file_7=472a1d8dbdc16496ba51334f62366466:/etc/jed-init.d/00debian.sl
+
+# md5sums from SVN revisions 50 to 56
+file_8=da918de66b912df0205c5b38401b09b6:/etc/jed.conf
+
+# md5sums from SVN revisions 57
+file_9=fc2b1e847dd08da8b338a50ab04d1eb0:/etc/jed.conf
+
+# md5sums from SVN revisions 58
+file_10=3b919dbba6a2656a926f818344a60552:/etc/jed.conf
+
+# (starting at SVN revision 59, the /etc/jed-init.d/ was not used anymore)
+
+changed=false
+
+for n in `seq 1 10` ; do
+ eval "tmp=\$file_$n"
+ md5sum=${tmp%%:*}
+ file=${tmp##*:}
+ if [ -e $file ] ; then
+ if echo "$md5sum $file" | md5sum -c >/dev/null 2>&1 ; then
+ # The configuration file was not changed by the user: remove it
+ # silently
+ rm -f $file
+ else
+ changed=true
+ fi
fi
+done
+
+if $changed; then
+ . /usr/share/debconf/confmodule
+
+ db_input medium jed-common/rm-site-defaults || true
+ db_go
+ db_get jed-common/rm-site-defaults
+ if [ "$RET" = true ] ; then
+ for n in `seq 1 10` ; do
+ eval "rm -f \${file_$n##*:}"
+ done
+ fi
fi
-
-db_go || true
Index: debian/watch
===================================================================
--- debian/watch (.../0.99.18-6) (revision 497)
+++ debian/watch (.../0.99.18-8) (revision 497)
@@ -1,3 +1,3 @@
version=3
opts="uversionmangle=s/-/./" \
- ftp://space.mit.edu/pub/davis/jed/v0.99 jed-(.*)\.tar\.gz
\ No newline at end of file
+ ftp://space.mit.edu/pub/davis/jed/v0.99 jed-(.*)\.tar\.gz
Index: debian/NEWS
===================================================================
--- debian/NEWS (.../0.99.18-6) (revision 497)
+++ debian/NEWS (.../0.99.18-8) (revision 497)
@@ -1,3 +1,23 @@
+jed-common (0.99.18-8) unstable; urgency=low
+
+ Since release 0.99.17.135-1 of the package, the JED run-time
+ configuration files are put in /etc/jed.d/ instead of
+ /etc/jed-init.d/. Due to a bug in dpkg (#108587) the config files
+ 00site.sl, 00debian.sl and 99defaults.sl as well as /etc/jed.conf are
+ not removed after an upgrade to 0.99.15-1 or higher.
+
+ A debconf question has been added to the jed-common pacakge which asks
+ the user whether their modified files should be kept in
+ /etc/jed-init.d/. However, the script that was responsible for
+ deleting the files was defective and there may be cases where the
+ files are still in the system but shouldn't be. If it is necessary,
+ the debconf question can be revisited by running "dpkg-reconfigure
+ jed-common".
+
+ -- Rafael Laboissiere <rafael@debian.org> Fri, 12 Jan 2007 14:11:18 +0100
+
+jed-common (0.99.18-7) unstable; urgency=low
+
=========================================
Recent changes to the Debian jed packages
=========================================
Index: debian/po/pt.po
===================================================================
--- debian/po/pt.po (.../0.99.18-6) (revision 0)
+++ debian/po/pt.po (.../0.99.18-8) (revision 497)
@@ -0,0 +1,48 @@
+# Portuguese translation for jed debconf messages.
+# Copyright (C) Tiago Fernandes <tjg.fernandes@gmail.com>, 2006
+# This file is distributed under the same license as the Jed package.
+# Tiago Fernandes <tjg.fernandes@gmail.com>, 2006
+# Rafael Laboissiere <rafael@debian.org> has added the lacking last string
+# translation, waiting for the official version from Tiago Fernandes.
+# We are trying to get this version into etch.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: jed 0.99.18-6\n"
+"Report-Msgid-Bugs-To: pkg-jed-devel@lists.alioth.debian.org\n"
+"POT-Creation-Date: 2006-08-11 00:49+0200\n"
+"PO-Revision-Date: 2007-01-11 23:08+0100\n"
+"Last-Translator: Rafael Laboissiere <rafael@debian.org>\n"
+"Language-Team: Portuguese <traduz@debianpt.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Poedit-Language: Portuguese\n"
+"X-Poedit-Country: PORTUGAL\n"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid "Remove old files in /etc/?"
+msgstr "Remover os ficheiros antigos de /etc/?"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and "
+"99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an "
+"upgrade to 0.99.15-1 or higher."
+msgstr "Devido a um bug no dpkg (#108587) os ficheiros de configuração "
+"00site.sl, 00debian.sl e 99defaults.sl em /etc/jed-init.d/ e /etc/jed.conf "
+"não são removidos na actualização para a versão 0.99.15-1 ou superior."
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"It seems you have modified one of these files, because their md5 sums differ "
+"from the originals."
+msgstr ""
+"Aparentemente, um destes ficheiros foi modificado por você, porque o "
+"valor de sua soma md5 é diferente do original."
Index: debian/po/pt_BR.po
===================================================================
--- debian/po/pt_BR.po (.../0.99.18-6) (revision 497)
+++ debian/po/pt_BR.po (.../0.99.18-8) (revision 497)
@@ -1,23 +1,14 @@
+# Brazilian Portuguese translation for jed debconf messages.
+# Copyright (C) Rafael Laboissiere <rafael@debian.org>, 2006
+# This file is distributed under the same license as the Jed package.
#
-# Translators, if you are not familiar with the PO format, gettext
-# documentation is worth reading, especially sections dedicated to
-# this format, e.g. by running:
-# info -n '(gettext)PO Files'
-# info -n '(gettext)Header Entry'
#
-# Some information specific to po-debconf are available at
-# /usr/share/doc/po-debconf/README-trans
-# or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-# Developers do not need to manually edit POT or PO files.
-#
-#, fuzzy
msgid ""
msgstr ""
-"Project-Id-Version: jed 0.99.18\n"
+"Project-Id-Version: jed 0.99.18-7\n"
"Report-Msgid-Bugs-To: pkg-jed-devel@lists.alioth.debian.org\n"
"POT-Creation-Date: 2006-08-11 00:49+0200\n"
-"PO-Revision-Date: 2006-05-14 18:21+0200\n"
+"PO-Revision-Date: 2007-01-12 09:22+0100\n"
"Last-Translator: Rafael Laboissiere <rafael@debian.org>\n"
"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
"MIME-Version: 1.0\n"
@@ -27,22 +18,21 @@
#. Type: boolean
#. Description
#: ../jed-common.templates:1001
-#, fuzzy
msgid "Remove old files in /etc/?"
-msgstr "Remover antigos arquivos 00site.sl e 99defaults.sl?"
+msgstr "Remover os arquivos antigos de /etc/?"
#. Type: boolean
#. Description
#: ../jed-common.templates:1001
-#, fuzzy
msgid ""
"Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and "
"99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an "
"upgrade to 0.99.15-1 or higher."
msgstr ""
-"Devido a um bug do dpkg (#108587) os arquivos de configuração\n"
-"00site.sl e 99defaults.sl em /etc/jed-init.d/ não são removidos após a\n"
-"atualização à versão 0.99.15-1 ou a uma outra mais recente."
+"Devido a um bug no dpkg (#108587) os arquivos de configuração "
+"00site.sl, 00debian.sl e 99defaults.sl em /etc/jed-init.d/ e "
+"/etc/jed.conf não são removidos na atualização para a versão 0.99.15-1 "
+"ou superior."
#. Type: boolean
#. Description
@@ -51,5 +41,5 @@
"It seems you have modified one of these files, because their md5 sums differ "
"from the originals."
msgstr ""
-"Aparentemente, um destes arquivos for modificado por você, por que o\n"
-"valor de sua soma md5 é diferente do original."
+"Aparentemente, um destes arquivos foi modificado por você, porque o "
+"valor de sua soma md5 é diferente do original."
\ No newline at end of file
Index: debian/po/ru.po
===================================================================
--- debian/po/ru.po (.../0.99.18-6) (revision 0)
+++ debian/po/ru.po (.../0.99.18-8) (revision 497)
@@ -0,0 +1,47 @@
+# translation of jed_0.99.18-6_debconf_ru.po to Russian
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Yuri Kozlov <kozlov.y@gmail.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0.99.18-6\n"
+"Report-Msgid-Bugs-To: pkg-jed-devel@lists.alioth.debian.org\n"
+"POT-Creation-Date: 2006-08-11 00:49+0200\n"
+"PO-Revision-Date: 2007-01-05 23:46+0300\n"
+"Last-Translator: Yuri Kozlov <kozlov.y@gmail.com>\n"
+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid "Remove old files in /etc/?"
+msgstr "УдалиÑ?Ñ? Ñ?Ñ?аÑ?Ñ?е Ñ?айлÑ? из /etc/?"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and "
+"99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an "
+"upgrade to 0.99.15-1 or higher."
+msgstr ""
+"Ð?з-за оÑ?ибки в dpkg (#108587) конÑ?игÑ?Ñ?аÑ?ионнÑ?е Ñ?айлÑ? 00site.sl, 00debian.sl и "
+"99defaults.sl в /etc/jed-init.d/ и /etc/jed.conf не Ñ?далилиÑ?Ñ? поÑ?ле "
+"обновлениÑ? до веÑ?Ñ?ии 0.99.15-1 или более новой."
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"It seems you have modified one of these files, because their md5 sums differ "
+"from the originals."
+msgstr ""
+"Ð?ажеÑ?Ñ?Ñ?, Ñ?Ñ?о вÑ? изменили один из Ñ?Ñ?иÑ? Ñ?айлов, Ñ?ак как иÑ? md5 Ñ?Ñ?ммÑ? "
+"оÑ?лиÑ?аÑ?Ñ?Ñ?Ñ? оÑ? оÑ?игиналÑ?нÑ?Ñ?."
+
Index: debian/po/sv.po
===================================================================
--- debian/po/sv.po (.../0.99.18-6) (revision 497)
+++ debian/po/sv.po (.../0.99.18-8) (revision 497)
@@ -24,12 +24,17 @@
#. Type: boolean
#. Description
#: ../jed-common.templates:1001
-msgid "Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and 99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an upgrade to 0.99.15-1 or higher."
+msgid ""
+"Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and "
+"99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an "
+"upgrade to 0.99.15-1 or higher."
msgstr "På grund av ett fel i dpkg (#108587) tas konfigurationsfilerna 00site.sl, 00debian.sl och 99defaults.sl under /etc/jed-init.d/ och /etc/jed.conf inte bort efter en uppgradering till 0.99.15-1 eller högre."
#. Type: boolean
#. Description
#: ../jed-common.templates:1001
-msgid "It seems you have modified one of this files, because their md5 sums differ from the originals."
+msgid ""
+"It seems you have modified one of these files, because their md5 sums differ "
+"from the originals."
msgstr "Det verkar som om du har ändrat en av dessa filer därför att deras md5-kontrollsummor skiljer sig från originalen."
Index: debian/po/nl.po
===================================================================
--- debian/po/nl.po (.../0.99.18-6) (revision 0)
+++ debian/po/nl.po (.../0.99.18-8) (revision 497)
@@ -0,0 +1,45 @@
+# Debian jed po-debconf translation,
+# Copyright (C) 2006 THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the jed package.
+# Vincent Zweije <zweije@xs4all.nl>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: jed 0.99.18-5\n"
+"Report-Msgid-Bugs-To: pkg-jed-devel@lists.alioth.debian.org\n"
+"POT-Creation-Date: 2006-08-11 00:49+0200\n"
+"PO-Revision-Date: 2006-10-10 19:56+0000\n"
+"Last-Translator: Vincent Zweije <zweije@xs4all.nl>\n"
+"Language-Team: Debian-Dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid "Remove old files in /etc/?"
+msgstr ""
+"Oude bestanden in /etc/ verwijderen?"
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"Due to a bug in dpkg (#108587) the config files 00site.sl, 00debian.sl and "
+"99defaults.sl in /etc/jed-init.d/ and /etc/jed.conf aren't removed after an "
+"upgrade to 0.99.15-1 or higher."
+msgstr ""
+"Door een fout in dpkg (#108587) worden de configbestanden 00site.sl, "
+"00debian.sl en 99defaults.sl in /etc/jed-init.d/ en /etc/jed.conf niet "
+"verwijderd na een opwaardering naar versie 0.99.15-1 of hoger."
+
+#. Type: boolean
+#. Description
+#: ../jed-common.templates:1001
+msgid ""
+"It seems you have modified one of these files, because their md5 sums differ "
+"from the originals."
+msgstr ""
+"U heeft waarschijnlijk een van deze bestanden gewijzigd, want hun md5 "
+"controlesommen verschillen van die van de originele bestanden."
Index: debian/jed-common.preinst
===================================================================
--- debian/jed-common.preinst (.../0.99.18-6) (revision 497)
+++ debian/jed-common.preinst (.../0.99.18-8) (revision 497)
@@ -1,54 +0,0 @@
-#! /bin/sh
-
-set -e
-
-case "$1" in
- install|upgrade)
- . /usr/share/debconf/confmodule
-
- file_0=/etc/jed-init.d/00site.sl
- file_1=/etc/jed-init.d/99default.sl
- file_2=/etc/jed-init.d/00debian.sl
- file_3=/etc/jed.conf
-
- # the md5sums posted by Rafael on pkg-jed-devel@l.a.d.o
- md5sum_0=2e00fef46fcee03fe504cea3b58510b6
- md5sum_1=1514586554dfe5aefcee84aa967fb01b
- # md5sum from jed-common 0.99.16â??5 aka Sarge
- md5sum_2=5bf498a3703c5330e3acea00d0fa7a87
- md5sum_3=5f0954b045b6b81f1ef0ba545d42c000
-
- prompt=false
- for i in 0 1 2 3; do
- eval "file=\$file_$i; md5sum=\$md5sum_$i"
- if [ -e $file ]; then
- if echo "$md5sum $file" | md5sum â??c >/dev/null 2>&1; then
- prompt=true
- else
- rm $file
- fi
- fi
- done
-
- if $prompt; then
- db_input medium jed-common/rm-site-defaults || true
- db_go || true
- db_get jed-common/rm-site-defaults
- if [ "$RET" = true ]; then
- rm -f /etc/jed-init.d/00site.sl /etc/jed-init.d/defaults.sl
- fi
- fi
- ;;
-
- abort-upgrade)
- ;;
-
- *)
- echo "preinst called with unknown argument \`$1'" >&2
- exit 0
- ;;
-esac
-
-#DEBHELPER#
-
-exit 0
Reply to: