Bug#480866: kamera does not mount my USB camera
Package: kamera
Version: 4:3.5.9-1+b1
Severity: normal
With kamera installed KDE is not able to mount my camera (Olympus C-370
ZOOM). dmesg shows this last line when it is connected:
usb 2-2: usbfs: process 28910 (kio_kamera) did not claim interface 0 before use
Bellow is included the full dmesg output from console and from KDE.
I was able to uninstall kamera (making an equivs) and now KDE is able to
mount it, however two icons are shown in the Desktop, one working for
USB mass storage, and the other not working for the camera.
lsusb output:
-------------
$ lsusb | grep Olympus
Bus 002 Device 005: ID 07b4:0109 Olympus Optical Co., Ltd C-370Z/D-535Z/X-450
$ lsusb -v -d 07b4:0109
Bus 002 Device 005: ID 07b4:0109 Olympus Optical Co., Ltd C-370Z/D-535Z/X-450
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07b4 Olympus Optical Co., Ltd
idProduct 0x0109 C-370Z/D-535Z/X-450
bcdDevice 0.00
iManufacturer 3 OLYMPUS
iProduct 4 X450/D535Z/C370Z
iSerial 5 712591784
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 5 SFF-8070i
bInterfaceProtocol 80
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Dmesg output from console:
--------------------------
usb 2-2: new full speed USB device using uhci_hcd and address 5
usb 2-2: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access OLYMPUS X450/D535Z/C370Z 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 06 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 06 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
Dmesg output from KDE:
----------------------
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 2-2: usbfs: process 28910 (kio_kamera) did not claim interface 0 before use
usb 2-2: usbfs: process 28910 (kio_kamera) did not claim interface 0 before use
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages kamera depends on:
ii kdelibs4c2a 4:3.5.9.dfsg.1-4 core libraries and binaries for al
ii libc6 2.7-11 GNU C Library: Shared libraries
ii libgcc1 1:4.3.0-4 GCC support library
ii libgphoto2-2 2.4.0-9 gphoto2 digital camera library
ii libgphoto2-port0 2.4.0-9 gphoto2 digital camera port librar
ii libqt3-mt 3:3.3.8b-5 Qt GUI Library (Threaded runtime v
ii libstdc++6 4.3.0-4 The GNU Standard C++ Library v3
kamera recommends no packages.
-- no debconf information
Reply to: