My ifconfig output is rather strange, but I see no ipv6 lines in here at
all. I will attempt a LISTEN override tonight.
br0 Link encap:Ethernet HWaddr 00:30:1B:B2:7B:E3
inet addr:192.168.5.202 Bcast:192.168.5.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41226454 errors:0 dropped:0 overruns:0 frame:0
TX packets:45577735 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3006280918 (2.7 GiB) TX bytes:4018935073 (3.7 GiB)
eth0 Link encap:Ethernet HWaddr 00:30:1B:B2:7B:E3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41227017 errors:0 dropped:0 overruns:0 frame:0
TX packets:45577588 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3603902389 (3.3 GiB) TX bytes:4032642750 (3.7 GiB)
Interrupt:18 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:13430778 errors:0 dropped:0 overruns:0 frame:0
TX packets:13430778 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2345973985 (2.1 GiB) TX bytes:2345973985 (2.1 GiB)
tap0 Link encap:Ethernet HWaddr 00:FF:A9:E5:BD:CE
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:42845 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:11557261 (11.0 MiB)
tun0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:192.168.6.1 P-t-P:192.168.6.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1494400 errors:0 dropped:0 overruns:0 frame:0
TX packets:1723769 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:713185840 (680.1 MiB) TX bytes:1004678929 (958.1 MiB)
tun1 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:192.168.7.1 P-t-P:192.168.7.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
-----Original Message-----
From: Pierre HABOUZIT [mailto:madcoder@debian.org]
Sent: Monday, May 15, 2006 2:09 PM
To: Erik Anderson; 353940@bugs.debian.org
Subject: Re: kdm: will no longer start (using Xvnc, "errno 97")
can you paste the answer from /sbin/ifconfig to us please ?
if you see lines like adr inet6: ... then you have ipv6 configured on
the machine, and you have to force kdm to listen on an ipv6 socket.
try to add LISTEN 0.0.0.0 in /etc/kde3/kdm/Xaccess to see if that
fixes the problem.
--
.O. Pierre Habouzit
..O madcoder@debian.org
OOO http://www.madism.org
Attachment:
smime.p7s
Description: S/MIME cryptographic signature