Your message dated Tue, 20 Dec 2022 16:05:26 +0000 with message-id <[🔎] E1p7f7O-004a3i-Ak@fasolo.debian.org> and subject line Bug#1026459: Removed package(s) from unstable has caused the Debian Bug report #817962, regarding kvmtool: needs an appropriate initrd and/or a new flavour of Linux kernel image to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 817962: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=817962 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: kvmtool: does not work with Debian kernels
- From: Paul Wise <pabs@debian.org>
- Date: Sat, 12 Mar 2016 13:05:22 +0800
- Message-id: <1457759122.3681.21.camel@debian.org>
Package: kvmtool Version: 0.20160203-1 Severity: important I don't think we should ship kvmtool in stretch without a Linux kernel flavour for it. If you agree, please upgrade this bug to serious. Right now the Debian Linux kernel packages don't have CONFIG_NET_9P_VIRTIO and CONFIG_VIRTIO_NET enabled. For kvmtool we probably want a trimmed down Linux flavour for both speed and attack surface reduction. pabs@chianamo ~ $ lkvm run # lkvm run -k /boot/vmlinuz-4.4.0-1-amd64 -m 448 -c 4 --name guest-15121 PPrroobbiinngg EEDDDD ((eedddd==ooffff ttoo ddiissaabbllee))...... ookk [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160224 (Debian 5.3.1-10) ) #1 SMP Debian 4.4.4-2 (2016-03-09) [ 0.000000] Command line: noapic noacpi pci=conf1 reboot=k panic=1 i8042.direct=1 i8042.dumbkbd=1 i8042.nopnp=1 console=ttyS0 earlyprintk=serial i8042.noaux=1 rw rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p init=/virt/pre_init ip=dhcp [ 0.000000] CPU: vendor_id 'LKVMLKVMLKVM' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000ffffe] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001bffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: last_pfn = 0x1c000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] MTRR: Disabled [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] found SMP MP-table at [mem 0x000f0370-0x000f037f] mapped at [ffff8800000f0370] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1bffc000-0x1bffffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1bff4001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 189012120618513 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x000000001bffffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001bffffff] [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: KVMCPU00 [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] IOAPIC[0]: apic_id 5, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Unknown bustype - ignoring [ 0.000000] Processors: 4 [ 0.000000] smpboot: Allowing 5 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fefff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ff000-0x000fffff] [ 0.000000] e820: [mem 0x1c000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:5 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88001a800000 s92888 r8192 d29992 u1048576 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1a80d9c0 [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 112777 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: noapic noacpi pci=conf1 reboot=k panic=1 i8042.direct=1 i8042.dumbkbd=1 i8042.nopnp=1 console=ttyS0 earlyprintk=serial i8042.noaux=1 rw rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p init=/virt/pre_init ip=dhcp [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Memory: 435756K/458360K available (5709K kernel code, 1065K rwdata, 2848K rodata, 1304K init, 828K bss, 22604K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=5. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=5 [ 0.000000] NR_IRQS:33024 nr_irqs:464 16 [ 0.000000] Console: colour *CGA 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] tsc: Detected 2127.998 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004000] Calibrating delay loop (skipped) preset value.. 4255.99 BogoMIPS (lpj=8511992) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Security Framework initialized [ 0.004000] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.004023] AppArmor: AppArmor disabled by boot time parameter [ 0.004851] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.005896] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006866] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.007741] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.008329] Initializing cgroup subsys io [ 0.008868] Initializing cgroup subsys memory [ 0.009795] Disabling memory control group subsystem [ 0.010451] Initializing cgroup subsys devices [ 0.011041] Initializing cgroup subsys freezer [ 0.012011] Initializing cgroup subsys net_cls [ 0.012627] Initializing cgroup subsys perf_event [ 0.013251] Initializing cgroup subsys net_prio [ 0.013855] Initializing cgroup subsys pids [ 0.014488] mce: CPU supports 32 MCE banks [ 0.015038] mce: unknown CPU type - not enabling MCE support [ 0.016007] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.016706] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.018909] Freeing SMP alternatives memory: 24K (ffffffff81c52000 - ffffffff81c58000) [ 0.025980] ftrace: allocating 23684 entries in 93 pages [ 0.036407] x2apic enabled [ 0.036989] Switched APIC routing to physical x2apic. [ 0.144000] smpboot: CPU0: LKVMLKVMLKVM 06/25 (family: 0x6, model: 0x25, stepping: 0x5) [ 0.144000] Performance Events: no PMU driver, software events only. [ 0.144000] KVM setup paravirtual spinlock [ 0.144000] x86: Booting SMP configuration: [ 0.144005] .... node #0, CPUs: #1 [ 0.004000] kvm-clock: cpu 1, msr 0:1bff4041, secondary cpu clock [ 0.156519] KVM setup async PF for cpu 1 [ 0.156519] #2 [ 0.156519] kvm-stealtime: cpu 1, msr 1a90d9c0 [ 0.004000] kvm-clock: cpu 2, msr 0:1bff4081, secondary cpu clock [ 0.168764] KVM setup async PF for cpu 2 [ 0.168764] #3 [ 0.168764] kvm-stealtime: cpu 2, msr 1aa0d9c0 [ 0.004000] kvm-clock: cpu 3, msr 0:1bff40c1, secondary cpu clock [ 0.180859] x86: Booted up 1 node, 4 CPUs [ 0.180848] KVM setup async PF for cpu 3 [ 0.180848] kvm-stealtime: cpu 3, msr 1ab0d9c0 [ 0.182500] smpboot: Total of 4 processors activated (17023.98 BogoMIPS) [ 0.183594] devtmpfs: initialized [ 0.186408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.188122] pinctrl core: initialized pinctrl subsystem [ 0.189098] NET: Registered protocol family 16 [ 0.200027] cpuidle: using governor ladder [ 0.212018] cpuidle: using governor menu [ 0.212960] PCI: Using configuration type 1 for base access [ 0.224339] ACPI: Interpreter disabled. [ 0.224754] vgaarb: loaded [ 0.224754] dmi: Firmware registration failed. [ 0.224976] PCI: Probing PCI hardware [ 0.224976] PCI host bridge to bus 0000:00 [ 0.228008] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.228684] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.229469] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.232724] clocksource: Switched to clocksource kvm-clock [ 0.245364] pnp: PnP ACPI: disabled [ 0.249448] NET: Registered protocol family 2 [ 0.250293] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.251129] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.251968] TCP: Hash tables configured (established 4096 bind 4096) [ 0.252731] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.253372] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.254175] NET: Registered protocol family 1 [ 0.254836] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac813fa53, max_idle_ns: 440795210049 ns [ 0.255994] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.257357] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.258205] audit: initializing netlink subsys (disabled) [ 0.258853] audit: type=2000 audit(1457758558.650:1): initialized [ 0.260093] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.260848] zbud: loaded [ 0.261360] VFS: Disk quotas dquot_6.6.0 [ 0.261853] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.263479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.264410] io scheduler noop registered [ 0.264864] io scheduler deadline registered [ 0.265377] io scheduler cfq registered (default) [ 0.265973] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.266602] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.267481] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.289088] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a U6_16550A [ 0.310867] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a U6_16550A [ 0.332765] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a U6_16550A [ 0.334134] Linux agpgart interface v0.103 [ 0.334697] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.335260] AMD IOMMUv2 functionality not available on this system [ 0.335833] i8042: PNP detection disabled [ 0.336614] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.337398] mousedev: PS/2 mouse device common for all mice [ 0.338128] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.339382] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.340076] rtc_cmos rtc_cmos: only 24-hr supported [ 0.340645] ledtrig-cpu: registered to indicate activity on CPUs [ 0.341250] dmi-sysfs: dmi entry is absent. [ 0.341922] NET: Registered protocol family 10 [ 0.342825] mip6: Mobile IPv6 [ 0.343141] NET: Registered protocol family 17 [ 0.343658] mpls_gso: MPLS GSO support [ 0.344131] mce: Unable to init device /dev/mcelog (rc: -5) [ 0.344854] microcode: no support for this CPU vendor [ 0.345809] registered taskstats version 1 [ 0.346350] zswap: loaded using pool lzo/zbud [ 0.347212] hctosys: unable to open rtc device (rtc0) [ 0.348574] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -19 [ 0.349459] Please append a correct "root=" boot option; here are the available partitions: [ 0.350443] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.351421] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-1-amd64 #1 Debian 4.4.4-2 [ 0.352476] 0000000000000086 00000000cc1a1833 ffffffff812ea6b5 ffffffff817eea98 [ 0.352563] ffff88001a083ea0 ffffffff8116619a ffff880000000010 ffff88001a083eb0 [ 0.352563] ffff88001a083e48 00000000cc1a1833 ffff880000000008 ffff88001a083eb8 [ 0.352563] Call Trace: [ 0.352563] [<ffffffff812ea6b5>] ? dump_stack+0x5c/0x77 [ 0.352563] [<ffffffff8116619a>] ? panic+0xd3/0x215 [ 0.352563] [<ffffffff81b244c4>] ? mount_block_root+0x202/0x296 [ 0.352563] [<ffffffff81b246eb>] ? prepare_namespace+0x131/0x167 [ 0.352563] [<ffffffff81b2419b>] ? kernel_init_freeable+0x1e2/0x205 [ 0.352563] [<ffffffff81582960>] ? rest_init+0x80/0x80 [ 0.352563] [<ffffffff8158296a>] ? kernel_init+0xa/0xe0 [ 0.352563] [<ffffffff8158ed8f>] ? ret_from_fork+0x3f/0x70 [ 0.352563] [<ffffffff81582960>] ? rest_init+0x80/0x80 [ 0.352563] Kernel Offset: disabled [ 0.352563] Rebooting in 1 seconds.. # KVM compatibility warning. virtio-9p device was not detected. While you have requested a virtio-9p device, the guest kernel did not initialize it. Please make sure that the guest kernel was compiled with CONFIG_NET_9P_VIRTIO=y enabled in .config. # KVM compatibility warning. virtio-net device was not detected. While you have requested a virtio-net device, the guest kernel did not initialize it. Please make sure that the guest kernel was compiled with CONFIG_VIRTIO_NET=y enabled in .config. Segmentation fault (core dumped) -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (900, 'testing'), (860, 'testing-proposed-updates'), (850, 'buildd-testing-proposed-updates'), (800, 'unstable'), (790, 'buildd-unstable'), (700, 'experimental'), (690, 'buildd-experimental'), (500, 'unstable-debug'), (1, 'experimental-debug') Architecture: amd64 (x86_64) Kernel: Linux 4.4.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages kvmtool depends on: ii libaio1 0.3.110-2 ii libc6 2.21-9 ii libsdl1.2debian 1.2.15+dfsg1-2 ii libvncserver1 0.9.10+dfsg-3+b1 ii zlib1g 1:1.2.8.dfsg-2+b1 kvmtool recommends no packages. kvmtool suggests no packages. -- no debconf information -- bye, pabs https://wiki.debian.org/PaulWiseAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---
- To: 817962-done@bugs.debian.org,817965-done@bugs.debian.org,827525-done@bugs.debian.org,872986-done@bugs.debian.org,966893-done@bugs.debian.org,982237-done@bugs.debian.org,1006290-done@bugs.debian.org,1001570-done@bugs.debian.org,
- Cc: kvmtool@packages.debian.org
- Subject: Bug#1026459: Removed package(s) from unstable
- From: Debian FTP Masters <ftpmaster@ftp-master.debian.org>
- Date: Tue, 20 Dec 2022 16:05:26 +0000
- Message-id: <[🔎] E1p7f7O-004a3i-Ak@fasolo.debian.org>
Version: 0.20170904-2+rm Dear submitter, as the package kvmtool has just been removed from the Debian archive unstable we hereby close the associated bug reports. We are sorry that we couldn't deal with your issue properly. For details on the removal, please see https://bugs.debian.org/1026459 The version of this package that was in Debian prior to this removal can still be found using https://snapshot.debian.org/. Please note that the changes have been done on the master archive and will not propagate to any mirrors until the next dinstall run at the earliest. This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster@ftp-master.debian.org. Debian distribution maintenance software pp. Scott Kitterman (the ftpmaster behind the curtain)
--- End Message ---