Bug#996259: Report bug ifenslave
Package: ifenslave
Version: 2.12
When I try to configure the bonging without VLANs in
/etc/network/interfaces, it is working after reboot. (example below)
auto bond0
iface bond0 inet manual
bond-slaves eno1 eno2
In my setup, I have two physical interfaces and two VLANs. My
configuration in /etc/network/interfaces:
auto bond0
iface bond0 inet manual
bond-slaves eno1.100 eno2.100
auto bond0.100
iface bond0.100 inet static
address x.x.x.x
netmask 255.255.255.0
gateway x.x.x.x
vlan-raw-device bond0
but it is not working after reboot. Output netwoking status:
"ifup: Failed to enslave eno1.100 to bond0.Is bond0 ready and a bonding
interface?"
Thanks
Lukas Mastilak
Reply to: