[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#608628: marked as done (NMU patch for xresprobe 0.4.23debian1-0.3)



Your message dated Wed, 03 Dec 2014 22:33:20 +0000
with message-id <E1XwIU4-00060A-Rj@franck.debian.org>
and subject line Bug#771952: Removed package(s) from unstable
has caused the Debian Bug report #608628,
regarding NMU patch for xresprobe 0.4.23debian1-0.3
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
608628: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=608628
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: xresprobe
Version: 0.4.23debian1

Here is the patch for my NMU of xresprobe.

diff -u xresprobe-0.4.23debian1/debian/changelog xresprobe-0.4.23debian1/debian/changelog
--- xresprobe-0.4.23debian1/debian/changelog
+++ xresprobe-0.4.23debian1/debian/changelog
@@ -1,3 +1,37 @@
+xresprobe (0.4.23debian1-0.3) experimental; urgency=low
+
+  * Non-maintainer upload to clean up the package.
+  * Update debhelper compat level from 4 to 7.
+  * Update standards-version from 3.7.2 to 3.9.1.  No changes needed.
+  * Apply patches from Ubuntu:
+    - Adust lcdsize.sh to add support for vesa.  Add missing getres
+      call.  Patch by Timo Aaltonen.
+    - Adjust xprobe.sh to not use the bare-bones config, instead rely
+      on the new xserver to be clever.  Make sure to only autoprobe
+      if the driver is vesa.  Patch by Timo Aaltonen.
+    - Add support for the Intel driver.  Patch by Matthew Garrett.
+    - Fix xprobe.sh failure when generating xorg.conf caused by
+      missing type1 module; this was dropped by Debian for xserver 1.3
+      since it's obsolete and has some security issues.  (Addresses
+      portion of fix for LP 127008).  Patch from Bryce Harrington.
+    - Fix issue with xresprobe in alternate installation for Intel gfx
+      laptops resulting in screen to be replaced by flashing colored
+      blocks, by making xresprobe use ddcprobe instead of xprobe for
+      laptops using the -intel driver.  (Closes LP: #127008 and many,
+      many duplicates).  Patch from Bryce Harrington.
+    - Fix resolution detection error in ddcprobe.sh where LCD's would
+      get configured to use one resolution less than their maximum
+      because ddcprobe cannot tell the difference between an analog
+      attached LCD and a CRT.  (Closes LP: #27667).  Patch from Bryce
+      Harrington.
+    - Adjust xprobe.sh handling of intel drivers (LP: #127008).  Patch
+      from Bryce Harrington.
+    - Adjust lcdsize.sh to fix vesa sed regex so that resolutions are
+      returned correctly without trailing text.  Patch from Timo
+      Aaltonen.
+
+ -- Petter Reinholdtsen <pere@hungry.com>  Sun, 02 Jan 2011 08:17:43 +0100
+
 xresprobe (0.4.23debian1-0.2) unstable; urgency=low
 
   * Non-maintainer upload to fix RC bug.
diff -u xresprobe-0.4.23debian1/ddcprobe.sh xresprobe-0.4.23debian1/ddcprobe.sh
--- xresprobe-0.4.23debian1/ddcprobe.sh
+++ xresprobe-0.4.23debian1/ddcprobe.sh
@@ -37,37 +37,18 @@
   SCREENTYPE="lcd"
 else
+  # Not necessarily true, as lcds can be connected as analog too
   SCREENTYPE="crt"
 fi
 
 TIMINGS="$(echo "$DDCPROBE" | egrep '^[cd]*timing:' | \
 	 sed -e 's/^[cd]*timing: \([^x]*\)x\([^ @$]*\).*$/\1x\2/;' | \
 	 sort -nr | egrep -v "$BLACKLISTMODES")"
+TIMINGS="$(echo "$TIMINGS" | sort -rnu -tx -k1,1nr -k2,2nr)"
 
-# highest in this case means 'highest resolution', and we want to demote it
-# to the least-preferred resolution; it will usually be completely unviewable
-
-if [ -n "$XRESPROBE_DEBUG" ]; then
-   echo "raw timings - $(echo "$TIMINGS" | xargs echo)" >&2
-fi
-
-NTIMINGS="$(echo "$TIMINGS" | wc -l)"
-HIGHEST="$(echo "$TIMINGS" | head -n 1)"
-OUTTIMINGS="$(echo "$TIMINGS" | tail -n "$(($NTIMINGS-1))")"
 MONITORNAME="$(echo "$DDCPROBE" | egrep '^monitorname:' | sed -e 's/^monitorname: //;')"
 MONITORRANGE="$(echo "$DDCPROBE" | egrep '^monitorrange:' | sed -e 's/^monitorrange: //;' -e 's/\,//;')"
-TIMINGS="$(echo "$TIMINGS" | sort -rnu -tx -k1,1nr -k2,2nr)"
-OUTTIMINGS="$(echo "$OUTTIMINGS" | sort -rnu -tx -k1,1nr -k2,2nr)"
 
-if [ "$SCREENTYPE" = "lcd" ]; then
-  echo "res: $(echo $TIMINGS | xargs echo)"
-  echo "disptype: lcd"
-else
-  if [ "$NTIMINGS" -gt "1" ]; then
-    echo "res: $(echo $OUTTIMINGS | xargs echo)"
-  else
-    echo "res: $(echo $HIGHEST | xargs echo)"
-  fi
-  echo "disptype: crt"
-fi
+echo "res: $(echo $TIMINGS | xargs echo)"
+echo "displaytype: $SCREENTYPE"
 echo "name: $MONITORNAME"
 echo "freq: $MONITORRANGE"
diff -u xresprobe-0.4.23debian1/debian/control xresprobe-0.4.23debian1/debian/control
--- xresprobe-0.4.23debian1/debian/control
+++ xresprobe-0.4.23debian1/debian/control
@@ -3,8 +3,8 @@
 Priority: optional
 Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
 Uploaders: Otavio Salvador <otavio@debian.org>, David Nusinow <dnusinow@debian.org>
-Build-Depends: debhelper (>= 4.0.0), cdbs
-Standards-Version: 3.7.2
+Build-Depends: debhelper (>= 7), cdbs
+Standards-Version: 3.9.1
 
 Package: xresprobe
 Architecture: any
only in patch2:
unchanged:
--- xresprobe-0.4.23debian1.orig/xresprobe
+++ xresprobe-0.4.23debian1/xresprobe
@@ -137,10 +137,11 @@
 fi
 
 if [ "x$LAPTOP" = "xyes" ]; then
-  if [ "$(uname -m)" = "ppc" ] || [ "$(uname -m)" = "ppc64" ]; then
+  # Allow use of ddc on intel; doprobe can result in screen corruption (LP: #127008)
+  if [ "$(uname -m)" = "ppc" ] || [ "$(uname -m)" = "ppc64" ] || [ "x$DRIVER" = "xintel" ]; then
     doddc
   fi
-  if [ -z "$RES" ]; then
+  if [ -z "$RES" ] && [ ! "x$DRIVER" = "xintel" ]; then
     doprobe
   fi
   DISPTYPE="lcd/lvds"
only in patch2:
unchanged:
--- xresprobe-0.4.23debian1.orig/xorg.conf
+++ xresprobe-0.4.23debian1/xorg.conf
@@ -14,7 +14,6 @@
 	Load	"freetype"
 	Load	"int10"
 	Load	"record"
-	Load	"type1"
 	Load	"vbe"
 EndSection
 Section "InputDevice"
only in patch2:
unchanged:
--- xresprobe-0.4.23debian1.orig/xprobe.sh
+++ xresprobe-0.4.23debian1/xprobe.sh
@@ -41,7 +41,11 @@
 sed -e "s/::DRIVER::/$DRIVER/;" < "$DATAPATH/xorg.conf" > "$TMPCONF"
 set +e
 
-/usr/bin/Xorg :67 -ac -probeonly -logfile "$TMPLOG" -config "$TMPCONF" > "$TMPOUT" 2>&1
+if [ "$DRIVER" = "vesa" ]; then
+  /usr/bin/Xorg :67 -ac -probeonly -logfile "$TMPLOG" > "$TMPOUT" 2>&1
+else
+  /usr/bin/Xorg :67 -ac -probeonly -logfile "$TMPLOG" -config "$TMPCONF" > "$TMPOUT" 2>&1
+fi
 
 echo "$XDIR"
 exit 0
only in patch2:
unchanged:
--- xresprobe-0.4.23debian1.orig/lcdsize.sh
+++ xresprobe-0.4.23debian1/lcdsize.sh
@@ -62,6 +62,10 @@
   EGREPLINE="\(II\) I810\(.*\): Size of device LFP \(local flat panel\) is .* x .*"
   SEDLINE="s/(II) I810([^)]*): Size of device LFP (local flat panel) is \([^ ]*\) x \([^ ]*\)/\1x\2/;"
   getres
+elif [ "$DRIVER" = "intel" ]; then
+  EGREPLINE="\(II\) intel\(.*\): Output LVDS using initial mode .*x.*"
+  SEDLINE="s/(II) intel([^)]*): Output LVDS using initial mode \([^ ]*\)x\([^ ]*\)/\1x\2/;"
+  getres
 elif [ "$DRIVER" = "savage" ]; then
   EGREPLINE="\(--\) SAVAGE\(.*\): .*.* .* LCD panel detected.*"
   SEDLINE="s/(--) SAVAGE([^)]*): \([^x]*\)x\([^x]*\) [^ ]* LCD panel detected.*$/\1x\2/;"
@@ -109,6 +113,10 @@
   EGREPLINE="\(--\) CHIPS\(.*\): Display Size: x=.*; y=.*"
   SEDLINE="s/(--) CHIPS([^)]*): Display Size: x=\([^;]*\); y=\([^ ]*\)/\1x\2/;"
   getres
+elif [ "$DRIVER" = "vesa" ]; then
+  EGREPLINE="\(--\) VESA\(.*\): Virtual size is .*x.*"
+  SEDLINE="s/(--) VESA([^)]*): Virtual size is \([^x]*\)x\([^ ]*\).*/\1x\2/;"
+  getres
 else
   exit 1
 fi
only in patch2:
unchanged:
--- xresprobe-0.4.23debian1.orig/debian/compat
+++ xresprobe-0.4.23debian1/debian/compat
@@ -1 +1 @@
-4
+7

Happy hacking,
-- 
Petter Reinholdtsen



--- End Message ---
--- Begin Message ---
Version: 0.4.23debian1-1+rm

Dear submitter,

as the package xresprobe has just been removed from the Debian archive
unstable we hereby close the associated bug reports.  We are sorry
that we couldn't deal with your issue properly.

For details on the removal, please see https://bugs.debian.org/771952

The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.

This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
ftpmaster@ftp-master.debian.org.

Debian distribution maintenance software
pp.
Scott Kitterman (the ftpmaster behind the curtain)

--- End Message ---

Reply to: