Bug#182656: snooper: i only have one computer and one modem

[Stefan Bauer <stefan.bauer@cubewerk.de>]

Hi,

connect the modem on the serial line and make sure, the serial port
is activated in your bios as well.

Make a first try to get some informations back from your modem with:

  # minicom -D /dev/ttyS0 (or your associated serial port)

Your modem should answer to `AT` with an `OK`

Start snooper with your available serial port and a non connected
port on your computer:

  # snooper ttyS0 ttyS1 (ttyS1 is not connected in our case)

Now start minicom and send some lines to the modem:

  # minicom -D /dev/ttyS0

You should instantly see some characters showing up on snooper if you
state comments in your minicom window

This howto will also get included in the next realses Debian.README 
file.

thanks


--
Stefan Bauer -----------------------------------------
PGP: E80A 50D5 2D46 341C A887 F05D 5C81 5858 DCEF 8C34
-------- plzk.de - Linux - because it works ----------