[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#942190: closed by Brian Potkin <claremont102@gmail.com> (Re: Bug#942190: cups: Memory leak for WIFI enabled printer.)

I've been notified in the meantime by a developer on the project that my particular printer doesn't require HP's drivers
and that open source ones will suffice. After removing HP's drivers and relying on open source drivers all of my issues
with this printer went away, including memory leaks on CUPS. 

Sorry for not replying, email must have gotten lost. 
-- 
Mladen Mijatov
Head of R&D, Way2CU
CEO, AGM Development

Key ID: 4096R/83EFD5A0 2013-08-18
--- Begin Message --- 
This is an automatic notification regarding your Bug report
which was filed against the cups package:

#942190: cups: Memory leak for WIFI enabled printer.

It has been closed by Brian Potkin <claremont102@gmail.com>.

Their explanation is attached below along with your original report.
If this explanation is unsatisfactory and you have not received a
better one in a separate message then please contact Brian Potkin <claremont102@gmail.com> by
replying to this email.


-- 
942190: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=942190
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
On Fri 11 Oct 2019 at 22:00:40 +0200, Mladen Mijatov wrote:

> Package: cups
> Version: 2.3.0-5
> Severity: normal
>
> I have HP LaserJet 1102W which I use through WIFI network. Over time cupsd
> starts leaking memory and within few hours goes to 1GB sometimes.
>
> Printer requires HP's LIP service and drivers to work.
>
> I have also noticed that when printer is interrupted in half-print, even if I
> rester printing service memory will leak. Since I have never reported cups
> related issues submitting additional information would require some level of
> guidance.

Dear Debian User,

Further information on your issue was requested some time ago but there
hasn't been any response from you. Use of our limited, volunteer
supported resources is best served by not keeping open inactive bugs any
longer than desirable, especially in cases where the package concerned
is older than the current stable Debian version. Consequently, the
report is now being closed.

Regards,

Brian.

--- End Message ---
--- Begin Message --- 
Package: cups
Version: 2.3.0-5
Severity: normal

I have HP LaserJet 1102W which I use through WIFI network. Over time cupsd
starts leaking memory and within few hours goes to 1GB sometimes.

Printer requires HP's LIP service and drivers to work.

I have also noticed that when printer is interrupted in half-print, even if I
rester printing service memory will leak. Since I have never reported cups
related issues submitting additional information would require some level of
guidance.



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.2.0-3-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages cups depends on:
ii  cups-client            2.3.0-5
ii  cups-common            2.3.0-5
ii  cups-core-drivers      2.3.0-5
ii  cups-daemon            2.3.0-5
ii  cups-filters           1.25.6-1
ii  cups-ppdc              2.3.0-5
ii  cups-server-common     2.3.0-5
ii  debconf [debconf-2.0]  1.5.73
ii  ghostscript            9.27~dfsg-3.1
ii  libavahi-client3       0.7-4+b1
ii  libavahi-common3       0.7-4+b1
ii  libc6                  2.29-2
ii  libcups2               2.3.0-5
ii  libgcc1                1:9.2.1-8
ii  libstdc++6             9.2.1-8
ii  libusb-1.0-0           2:1.0.23-1
ii  poppler-utils          0.71.0-6
ii  procps                 2:3.3.15-2+b1

Versions of packages cups recommends:
ii  avahi-daemon                     0.7-4+b1
ii  colord                           1.4.3-4
ii  cups-filters [ghostscript-cups]  1.25.6-1
ii  printer-driver-gutenprint        5.3.3-2

Versions of packages cups suggests:
ii  cups-bsd                                   2.3.0-5
pn  cups-pdf                                   <none>
ii  foomatic-db-compressed-ppds [foomatic-db]  20190913-1
ii  hplip                                      3.19.8+dfsg0-7
ii  printer-driver-hpcups                      3.19.8+dfsg0-7
pn  smbclient                                  <none>
ii  udev                                       242-7

-- debconf information:
  cupsys/raw-print: true
  cupsys/backend: lpd, socket, usb, snmp, dnssd

--- End Message ---

--- End Message ---
Reply to: