Bug#933578: hplip: HP1100A can not scan
Package: hplip
Version: 3.18.12+dfsg0-2
Severity: important
Tags: upstream
Dear Maintainer,
Renew from Debian 6.0.10 to Debian 10 I've found that HP1100A multifunctiion printer can not scan.
I was install several packages of cups, sane and hplip. After starting lp module and add using
lpadmin HP1100A I could print (at least from command line) but scanimage doesn't work at all.
I was try scanimage -L sane-find-scanner hp-scan -i hp-probe but the result was same - that
printer or uri does not have this functionality. The hp-probe doesn't offer parallel port option.
After investigatiion I've found one difference beetwen my old and new installation
/etc/hp/hplip.conf
...
[configure]
pp-build=no
On my old system it was "yes" - no parport support was built?
Possible to put this option back?
Rebuild full hplip package(s) with my inrastructure too much for me. Also if you keep this option,
I can not upgrde/update these packages even on security issu.
I desperatelly need parport connected multifonction printer back.
-- Package-specific info:
Saving output in log file: /home/tovis/hp-check.log
HP Linux Imaging and Printing System (ver. 3.18.12)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already
built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile-
and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Traceback (most recent call last):
File "/usr/share/hplip/base/utils.py", line 265, in walkFiles
names = os.listdir(root)
FileNotFoundError: [Errno 2] No such file or directory: '/usr/include/cups'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/share/hplip/base/utils.py", line 267, in walkFiles
raise StopIteration
StopIteration
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/bin/hp-check", line 861, in <module>
dep.core.init()
File "/usr/share/hplip/installer/core_install.py", line 527, in init
self.check_dependencies(callback)
File "/usr/share/hplip/installer/core_install.py", line 620, in check_dependencies
self.have_dependencies[d] = self.dependencies[d][3]()
File "/usr/share/hplip/installer/core_install.py", line 1166, in check_cups_image
return check_file("raster.h", "/usr/include/cups")
File "/usr/share/hplip/installer/dcheck.py", line 107, in check_file
for w in utils.walkFiles(dir, recurse=True, abs_paths=True, return_folders=False, pattern=f):
RuntimeError: generator raised StopIteration
-- System Information:
Debian Release: 10.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.118
ii cups 2.2.10-6
ii hplip-data 3.18.12+dfsg0-2
ii libc6 2.28-10
ii libcups2 2.2.10-6
ii libdbus-1-3 1.12.16-1
ii libhpmud0 3.18.12+dfsg0-2
ii libpython3.7 3.7.3-2
ii libsane 1.0.27-3.2
ii libsane-hpaio 3.18.12+dfsg0-2
ii libsnmp30 5.7.3+dfsg-5
ii libusb-1.0-0 2:1.0.22-2
ii lsb-base 10.2019051400
ii printer-driver-hpcups 3.18.12+dfsg0-2
ii python3 3.7.3-1
ii python3-dbus 1.2.8-3
ii python3-gi 3.30.4-1
ii python3-pexpect 4.6.0-1
ii python3-pil 5.4.1-2
ii python3-reportlab 3.5.13-1
ii wget 1.20.1-1.1
ii xz-utils 5.2.4-1
Versions of packages hplip recommends:
ii avahi-daemon 0.7-4+b1
ii policykit-1 0.105-25
ii printer-driver-postscript-hp 3.18.12+dfsg0-2
ii sane-utils 1.0.27-3.2
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
pn python3-notify2 <none>
pn system-config-printer <none>
-- no debconf information
Reply to: