Bug#702673: PostScript drivers won't work for HP LaserJet 1200
On Tue 23 Jul 2013 at 10:31:21 +0200, Stefan Nagy wrote:
> I'd appreciate any further suggestions.
In an earlier mail you said you created a print queue with
lpadmin -p test -E -v file:/tmp/printout -P /etc/cups/ppd/HP-LaserJet-1200.ppd
and obtained a printout which satisfactorily represented the file you
wanted to print. Now send this file directly to the printer, avoiding
any backend:
cat file > /dev/usb/lp0
You will have to check /dev/usb/lp0 is the correct place to send
printout. As a control you could use 'Print to File' from Iceweasel to
get another PostScript file to use cat with. The PostScript in such a
file is generated using Cairo.
If the first test is satisfactory do
lpstat -v
to obtain the USB device for the LaserJet and change the previous queue
with
lpadmin -p test -E -v <USB_device> -P /etc/cups/ppd/HP-LaserJet-1200.ppd
Then
p -d test -o raw printout
This tests the backend.
Reply to: