Package: hplip Version: 3.11.1-3 Severity: important File: /usr/share/bug/hplip/script When reporting a bug, the bug script causes /usr/share/hplip/systray.py to be started. This is not acceptable. I expect that a bug script does not start or stop any sort of service and does not drop anything into my notification area. I expect that behavior on Windows, but not on Linux. If you want to run a command that causes any of those types of behaviors, you need to get explicit consent from the user *before* you do it and it needs to be optional. Please fix this in your next upload. -- Package-specific info: HP Linux Imaging and Printing System (ver. 3.11.1) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependewarning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.) warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. ncies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux lakeview 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux Distribution: debian unstable Checking Python version... OK, version 2.6.6 installed Checking PyQt 4.x version... OK, version 4.8.3 installed. Checking for CUPS... Status: scheduler is running error_log is set to level: debug Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.1 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: CUPS DDK - CUPS driver development kit... Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Librarerror: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. y (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: PolicyKit - Administrative policy framework... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.11.1 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.11.1 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.11.1.19 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: # hplip.state - HPLIP runtime persistent variablerror: Unable to communicate with device (code=12): hp:/net/Officejet_4500_G510g-m?zc=HP1ACCBD error: unable to open channel error: Communication status: Failed es. [plugin] installed=0 eula=0 Current contents of '~/.hplip/hplip.conf' file: [last_used] printer_name = Officejet-4500 working_dir = . device_uri = "hp:/net/Officejet_4500_G510g-m?zc=HP1ACCBD" [commands] scan = /usr/bin/xsane -V %SANE_URI% [installation] version = 3.11.1.19 date_time = 04/21/11 22:56:33 [settings] systray_messages = 0 systray_visible = 0 [fax] email_address = voice_phone = [refresh] rate = 30 enable = false type = 1 [polling] enable = false device_list = interval = 5 -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Officejet-4500 -------------- Type: Printer Device URI: hp:/net/Officejet_4500_G510g-m?zc=HP1ACCBD PPD: /etc/cups/ppd/Officejet-4500.ppd PPD Description: HP Officejet 4500 g510g-m, hpcups 3.11.1 Printer status: printer Officejet-4500 is idle. enabled since Thu Apr 21 22:40:21 2011 PIXMA-MP800 ----------- Twarning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. ype: Unknown Device URI: dnssd://MP800._printer._tcp.local/ PPD: /etc/cups/ppd/PIXMA-MP800.ppd PPD Description: Canon PIXMA iP4200 - CUPS+Gutenprint v5.2.6 Printer status: printer PIXMA-MP800 is idle. enabled since Sun Jan 31 23:32:04 2010 ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... device `hpaio:/net/Officejet_4500_G510g-m?zc=HP1ACCBD' is a Hewlett-Packard Officejet_4500_G510g-m all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. --------------- | USER GROUPS | --------------- bmc lp dialout cdrom floppy sudo audio video plugdev netdev lpadmin powerdev pulse-rt fuse kvm wiresherror: 5 errors and/or warnings. ark User member of group 'lp'. Enables print/ scan/ fax. User member of group 'lpadmin'. ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages hplip depends on: ii adduser 3.112+nmu2 add and remove users and groups ii coreutils 8.5-1 GNU core utilities ii cups 1.4.6-5 Common UNIX Printing System(tm) - ii cups-client 1.4.6-5 Common UNIX Printing System(tm) - ii hplip-cups 3.11.1-3 HP Linux Printing and Imaging - CU ii hplip-data 3.11.1-3 HP Linux Printing and Imaging - da ii libc6 2.11.2-13 Embedded GNU C Library: Shared lib ii libcups2 1.4.6-5 Common UNIX Printing System(tm) - ii libdbus-1-3 1.4.8-2 simple interprocess messaging syst ii libhpmud0 3.11.1-3 HP Multi-Point Transport Driver (h ii libsane 1.0.22-2 API library for scanners ii libsane-hpaio 3.11.1-3 HP SANE backend for multi-function ii libssl1.0.0 1.0.0d-2 SSL shared libraries ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip ii policykit-1 0.101-4 framework for managing administrat ii python 2.6.6-14 interactive high-level object-orie ii python-dbus 0.83.1-1+b1 simple interprocess messaging syst ii python-imaging 1.1.7-2+b1 Python Imaging Library ii python-pexpect 2.3-1 Python module for automating inter ii python-support 1.0.13 automated rebuilding support for P ii wget 1.12-3 retrieves files from the web Versions of packages hplip recommends: ii avahi-daemon 0.6.30-2 Avahi mDNS/DNS-SD daemon ii sane-utils 1.0.22-2 API library for scanners -- utilit Versions of packages hplip suggests: pn hplip-doc <none> (no description available) pn hplip-gui <none> (no description available) ii python-notify 0.1.1-2+b2 Python bindings for libnotify ii system-config-printer 1.2.3-3 graphical interface to configure t -- no debconf information -- brian m. carlson / brian with sandals: Houston, Texas, US +1 832 623 2791 | http://www.crustytoothpaste.net/~bmc | My opinion only OpenPGP: RSA v4 4096b: 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187
Attachment:
signature.asc
Description: Digital signature