Bug#622598: hplip: depends on libsane-hpaio 3.11.1-2 instead of 3.11.1-2+b1
Package: hplip
Version: 3.11.1-2+b1
Severity: grave
Justification: renders package unusable
hplip 3.11.1-2+b1 depends on libsane-hpaio 3.11.1-2 instead of 3.11.1-2+b1
thus cannot be installed.
-- Package-specific info:
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
HP Linux Imaging and Printing System (ver. 3.11.1)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux ypig 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
Distribution:
debian unstable
Checking Python version...
OK, version 2.6.6 installed
Checking PyQt 4.x version...
OK, version 4.8.3 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.6
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.11.1 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.1
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.1.19
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[installation]
version = 3.11.1.19
date_time = 04/13/11 11:26:56
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
isc-guest-printer
-----------------
Type: Unknown
Device URI: lpd://localhost/isc-mono-1-physical
isc-mono-1
----------
Type: Unknown
Device URI: lpd://localhost/isc-mono-1-physical
isc-mono-1-physical
-------------------
Type: Unknown
Device URI: lpd://liplr5
ixxi-guest-printer
------------------
Type: Unknown
Device URI: lpd://localhost/ixxi-mono-1-physical
ixxi-mono-1
-----------
Type: Unknown
Device URI: lpd://localhost/ixxi-mono-1-physical
ixxi-mono-1-physical
--------------------
Type: Unknown
Device URI: lpd://liplr5
ixxi-multi-1-mono-A3
--------------------
Type: Unknown
Device URI: lpd://localhost/ixxi-multi-1-mono-A3-physical
ixxi-multi-1-mono-A3-physical
-----------------------------
Type: Unknown
Device URI: lpd://ixxi-multi-1.lip.ens-lyon.fr/ixxi.multi-1-mono-A3
ixxi-multi-1-mono-A4
--------------------
Type: Unknown
Device URI: lpd://localhost/ixxi-multi-1-mono-A4-physical
ixxi-multi-1-mono-A4-physical
-----------------------------
Type: Unknown
Device URI: lpd://ixxi-multi-1.lip.ens-lyon.fr/ixxi-multi-1-mono-A4
lip-color-1
-----------
Type: Unknown
Device URI: lpd://localhost/lip-color-1-physical
lip-color-1-A3
--------------
Type: Unknown
Device URI: lpd://localhost/lip-color-1-physical
lip-color-1-A4
--------------
Type: Unknown
Device URI: lpd://localhost/lip-color-1-physical
lip-color-1-physical
--------------------
Type: Unknown
Device URI: lpd://lipc
lip-color-1-trans
-----------------
Type: Unknown
Device URI: lpd://localhost/lip-color-1-physical
lip-guest-printer
-----------------
Type: Unknown
Device URI: lpd://localhost/lip-multi-1-mono-A4-physical
lip-mono-1
----------
Type: Unknown
Device URI: lpd://localhost/lip-mono-1-physical
lip-mono-1-physical
-------------------
Type: Unknown
Device URI: lpd://printerbocal
lip-mono-2
----------
Type: Unknown
Device URI: lpd://localhost/lip-mono-2-physical
lip-mono-2-physical
-------------------
Type: Unknown
Device URI: lpd://lwi2
lip-multi-1-color-A3
--------------------
Type: Unknown
Device URI: lpd://localhost/lip-multi-1-color-A3-physical
lip-multi-1-color-A3-physical
-----------------------------
Type: Unknown
Device URI: lpd://ricoh1/lip-multi-1-color-A3
lip-multi-1-color-A4
--------------------
Type: Unknown
Device URI: lpd://localhost/lip-multi-1-color-A4-physical
lip-multi-1-color-A4-physical
-----------------------------
Type: Unknown
Device URI: lpd://ricoh1/lip-multi-1-color-A4
lip-multi-1-mono-A4
-------------------
Type: Unknown
Device URI: lpd://localhost/lip-multi-1-mono-A4-physical
lip-multi-1-mono-A4-physical
----------------------------
Type: Unknown
Device URI: lpd://ricoh1/lip-multi-1-mono-A4
lip-multi-1-physical
--------------------
Type: Unknown
Device URI: lpd://ricoh1
lipucb-guest-printer
--------------------
Type: Unknown
Device URI: lpd://localhost/lipucb-mono-1-physical
lipucb-mono-1
-------------
Type: Unknown
Device URI: lpd://localhost/lipucb-mono-1-physical
lipucb-mono-1-physical
----------------------
Type: Unknown
Device URI: lpd://140.77.14.14/
lipucb-multi-color-A3
---------------------
Type: Unknown
Device URI: lpd://localhost/lipucb-multi-color-A3-physical
lipucb-multi-color-A3-physical
------------------------------
Type: Unknown
Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-color-A3
lipucb-multi-color-A4
---------------------
Type: Unknown
Device URI: lpd://localhost/lipucb-multi-color-A4-physical
lipucb-multi-color-A4-physical
------------------------------
Type: Unknown
Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-color-A4
lipucb-multi-mono-A4
--------------------
Type: Unknown
Device URI: lpd://localhost/lipucb-multi-mono-A4-physical
lipucb-multi-mono-A4-physical
-----------------------------
Type: Unknown
Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-mono-A4
reso
----
Type: Unknown
Device URI: lpd://localhost/reso-physical
reso-physical
-----warning: Device URI: (Makeuri FAILED)
warning: Device URI: (Makeuri FAILED)
error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.
error: 2 errors and/or warnings.
--------
Type: Unknown
Device URI: lpd://printer-reso.lip.ens-lyon.fr/queue
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x2f24 at 002:002:
HP Device 0x24 at 002:004:
---------------
| USER GROUPS |
---------------
vlefevre adm dialout cdrom floppy audio video plugdev Debian-exim scanner netdev bluetooth fuse powerdev
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.112+nmu2 add and remove users and groups
ii coreutils 8.5-1 GNU core utilities
ii cups 1.4.6-4 Common UNIX Printing System(tm) -
ii cups-client 1.4.6-4 Common UNIX Printing System(tm) -
ii hplip-cups 3.11.1-2 HP Linux Printing and Imaging - CU
ii hplip-data 3.11.1-2 HP Linux Printing and Imaging - da
ii libc6 2.11.2-13 Embedded GNU C Library: Shared lib
ii libcups2 1.4.6-4 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.4.6-1 simple interprocess messaging syst
ii libhpmud0 3.11.1-2 HP Multi-Point Transport Driver (h
ii libsane 1.0.22-2 API library for scanners
ii libsane-hpaio 3.11.1-2 HP SANE backend for multi-function
ii libssl0.9.8 0.9.8o-7 SSL shared libraries
ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip
ii policykit-1 0.101-3 framework for managing administrat
ii python 2.6.6-12 interactive high-level object-orie
ii python-dbus 0.83.1-1 simple interprocess messaging syst
ii python-imaging 1.1.7-2 Python Imaging Library
ii python-pexpect 2.3-1 Python module for automating inter
ii python-support 1.0.11 automated rebuilding support for P
Versions of packages hplip recommends:
ii avahi-daemon 0.6.30-2 Avahi mDNS/DNS-SD daemon
ii sane-utils 1.0.22-2 API library for scanners -- utilit
Versions of packages hplip suggests:
pn hplip-doc <none> (no description available)
pn hplip-gui <none> (no description available)
ii python-notify 0.1.1-2+b2 Python bindings for libnotify
pn system-config-printer <none> (no description available)
-- Configuration Files:
/etc/hp/hplip.conf changed [not included]
-- no debconf information
Reply to: