Your message dated Sun, 11 Apr 2010 14:22:53 +1000 with message-id <201004111422.54452.msp@debian.org> and subject line Re: Bug#500207: hpijs: Error 'unable to read device-id' in logs has caused the Debian Bug report #500207, regarding hpijs: Error 'unable to read device-id' in logs to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 500207: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=500207 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: hpijs: Error 'unable to read device-id' in logs
- From: Frans Pop <elendil@planet.nl>
- Date: Fri, 26 Sep 2008 09:14:03 +0200
- Message-id: <20080926071403.14183.94249.reportbug@faramir.fjphome.nl>
Package: hpijs Version: 2.8.6.b-1 Severity: normal With recent print jobs (I only seldomly use my printer) I'm seeing the following error in the syslog: Sep 26 08:56:39 faramir kernel: ppdev0: registered pardevice Sep 26 08:56:41 faramir kernel: ppdev0: registered pardevice Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read device-id ret=-110 Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read device-id ret=-110 Sep 26 08:57:48 faramir kernel: ppdev0: unregistered pardevice Sep 26 08:57:54 faramir kernel: ppdev0: unregistered pardevice -- Package-specific info: HP Linux Imaging and Printing System (ver. 2.8.6b) Dependency/Version Check Utility ver. 14.0 Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- warning: Invalid ppd_dir value: None error: NOT FOUND OR FAILED TO LOAD! error: SIP not installed or version not found. error: Version: (Not available. CUPS may not be installed or not running.) and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux faramir 2.6.27-rc7 #17 SMP Mon Sep 22 06:01:38 CEST 2008 x86_64 GNU/Linux Distribution: debian unstable HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.2 installed Checking PyQt version... Checking SIP version... Checking for CUPS... Status: scheduler is running Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.0 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: cups - Common Unix Printing System... OK, found. Checking for dependency: cups-ddk - CUPS driver development kit... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning witherror: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. hp-scan)... OK, found. Checking for dependency: ppdev - Parallel port support kernel module.... OK, found. Checking for dependency: PyQt - Qt interface for Python... Checking for dependency: python-ctypes - A foreign function library for Python... OK, found. Checking for dependency: python-dbus - Python bindings for dbus... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 2.8.6b currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=2.8.6b [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no internal-tag=2.8.6.20b ------------------------------- | DISCOVERED PARALLEL DEVICES | ------------------------------- No devices found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- hpp1100 ------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/par/PHOTOSMART_P1100?device=/dev/parport0 PPD: /etc/cups [01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m [01mSystem Tray Status Service ver. 0.1[0m Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Traceback (most recent call last): File "/usr/bin/hp-systray", line 139, in <module> from ui import systemtray_qt3 File "/usr/share/hplip/ui/systemtray_qt3.py", line 33, in <module> from ui_utils import load_pixmap File "/usr/share/hplip/ui/ui_utils.py", line 32, in <module> from qt import * ImportError: No module named qt warning: Unable to connect to dbus. Is hp-systray running? error: Unable to communicate with device (code=12): hp:/par/PHOTOSMART_P1100?device=/dev/parport0 error: Device not found [01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m [01mSystem Tray Status Service ver. 0.1[0m Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Traceback (most recent call last): File "/usr/bin/hp-systray", line 139, in <module> from ui import systemtray_qt3 File "/usr/share/hplip/ui/systemtray_qt3.py", line 33, in <module> from ui_utils import load_pixmap File "/usr/share/hplip/ui/ui_utils.py", line 32, in <module> from qt import * ImportError: No module named qt warning: Unable to connect to dbus. Is hp-systray running? error: Unable to communicate with device (code=12): hp:/par/PHOTOSMART_P1100?device=/dev/parport0 error: Device not found error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf). error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext. /ppd/hpp1100.ppd PPD Description: HP PhotoSmart P1100 Foomatic/hpijs (recommended) Printer status: printer hpp1100 is idle. enabled since Fri 26 Sep 2008 08:57:54 AM CEST hpp1100-remote -------------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/par/PHOTOSMART_P1100?device=/dev/parport0 ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... ------error: 10 errors and/or warnings. ----------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.27-rc7 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages hpijs depends on: ii cupsddk 1.2.3-4 CUPS Driver Development Kit ii foomatic-filters 3.0.2-20080211-3.1 OpenPrinting printer support - fil ii ghostscript 8.62.dfsg.1-3.1 The GPL Ghostscript PostScript/PDF ii hplip 2.8.6.b-1 HP Linux Printing and Imaging Syst ii libc6 2.7-13 GNU C Library: Shared libraries ii libgcc1 1:4.3.2-1 GCC support library ii libjpeg62 6b-14 The Independent JPEG Group's JPEG ii libssl0.9.8 0.9.8g-13 SSL shared libraries ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 hpijs recommends no packages. Versions of packages hpijs suggests: pn hpijs-ppds <none> (no description available) pn hplip-doc <none> (no description available) -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Frans Pop <elendil@planet.nl>, 500207-done@bugs.debian.org
- Subject: Re: Bug#500207: hpijs: Error 'unable to read device-id' in logs
- From: Mark Purcell <msp@debian.org>
- Date: Sun, 11 Apr 2010 14:22:53 +1000
- Message-id: <201004111422.54452.msp@debian.org>
- In-reply-to: <20080926071403.14183.94249.reportbug@faramir.fjphome.nl>
- References: <20080926071403.14183.94249.reportbug@faramir.fjphome.nl>
forwarded 500207 https://answers.launchpad.net/hplip/+question/54810 thanks On Friday 26 September 2008 17:14:03 Frans Pop wrote: > With recent print jobs (I only seldomly use my printer) I'm seeing the > following error in the syslog: > Sep 26 08:56:39 faramir kernel: ppdev0: registered pardevice > Sep 26 08:56:41 faramir kernel: ppdev0: registered pardevice > Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read device-id > ret=-110 Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read > device-id ret=-1 The -110 error means the "hp" backend timed out trying to read the printer device-id. This is basic communication to the printer that needs to work. https://answers.launchpad.net/hplip/+question/54810 MarkAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---