[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#302129: marked as done (HP 5P Laserjet Printer omits paper)

Your message dated Tue, 3 Aug 2010 16:02:15 +0200
with message-id <AANLkTikq8_NpAMHeaMTPaFBn5hGHWnC7BtcC1hjR58m_@mail.gmail.com>
and subject line [Debian QA] please review your old bug reports against CUPS
has caused the Debian Bug report #302129,
regarding HP 5P Laserjet Printer omits paper
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
302129: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=302129
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Debian-installer-version:
sarge-i386-netinst.iso 
Date, end of february 2005
must have been release cabdidate 2

http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso

the  name of the cd  is Debian testing i386    bin-1

modified  sun 21 november 2004



uname -a:

Linux debian 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux

Date:
I installed several times during march 2005


Method:

network install,
I booted from the cd,
the ftp server from debian was automatically found

no proxy server,  I had my DLink router connected to
an ADSL modem

later I selected packages with aptitude and dselect from
http://sunsite.informatik.rwth-aachen.de/

On this machine Win2k, winxp, suse 8.2 suse 9.2 and solaris 9 x86
runs sucessfully

Machine:

Pentium II  CPU  with 256 MB RAM,
3com 590  NIC

Machine buildt for Windows NT4 and later upgraded



Processor:  Pentium II  366 MHz

Memory:   256 MB RAM



Root Device:

Symbios Logic SCSI

I have IDE Hard disks,
SCSI Iomega ZIP,
SCSI CDRecorder
No SCSI Hard Disk

Root Size/partition table:

Partition Table for /dev/hda

              First       Last
# Type Sector Sector Offset Length Filesystem Type (ID) Flag -- ------- ----------- ----------- ------ ----------- -------------------- ---- 
/*  here is windows XP  */
1 Primary 0 19454714* 63 19454715*HPFS/NTFS (07) None None 19454715* 19456415 0 1701*Unusable None 

/* here is solaris 9 x86 */
2 Primary 19456416 42213023 0 22756608 Linux swap (82) Boot 

/* here is debian sarge  mount point  /   */
3 Primary 42213024 59791535 0 17578512 Linux (83) None 4 Primary 59791536 61745039 0 1953504 W95 Ext'd (LBA) (0F) None 

/* here is the swap for debian sarge  */
5 Logical 59791536 61745039 63 1953504 Linux swap (82) None Logical 61745040 78165359 0 16420320 Free Space None 




Output of lspci and lspci -n:

debian:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex]
0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c815 (rev 04) 

#  This is a big problem for me
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b 2) # no errors, but neither gnome not KDE offers better resolution than 800 x 600 

debian:~# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0401: 1274:1371 (rev 08)
0000:00:0b.0 0200: 10b7:5900
0000:00:0d.0 0100: 1000:0004 (rev 04)
0000:01:00.0 0300: 10de:0110 (rev b2)
debian:~#





Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader: [O] # this was ok since I selected to use GRUB from floppy 
Reboot:                 [O]

Comments/Problems:

The big problem was the video card,
during the second installation I paid high attention to
supply correct information about  monitor frequencies

31-65 KHz / 50-120 Hz

still I only have a bad resolution

     -> applications
     -> desktop preferences
     -> screen resolution
          800 x 600  #
          640 x 480  #  this is not acceptable

usually I have 1024 x 768

How can I change this ?

the network ftp  installation was very good.

I hope that some comments about how to start up xfree86 can help.

I also noticed some complaints and warnings about the NVidia video card,
but I didn't know it was that bad.

How can I configure the screen resolution of my NVidia Video Card?

Also windowmaker  would have been a nice alternative to gnome and KDE
But this KDE looks really nice.



Best regards

Morten Gulbrandsen

--- End Message ---
--- Begin Message --- Hi,

This bug is quite old and I didn't get any answer from my previous mail.
So, I'm closing this bug report.
If the problem still occurs, please, feel free to reopen it.

Thanks,

Jean

--- End Message ---
Reply to: