[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#403703: cupsys: pstops incorrectly outputs stop+start JCL after setup section if outputorder!=normal



Package: cupsys
Version: 1.2.7-1
Severity: grave

*** Please type your report below this line ***

I'm using a manufacturer supplied PPD for a Kyocera FS-1200 printer.
If /usr/lib/cups/filter/pstops is invoked without "outputorder=normal"
it will inject the JCL code to stop and start a job after the PostScript
page setup code, but before the actual page contents.  This causes the
printer to forget the setup and reject the page contents which follow.

I've attached these files:

FS-1200.ppd - the PPD file from Kyocera.

pstops-157-in.ps - the input file (generated with gedit)

pstops-157.ps - the output of running pstops as follows:

        PPD=/etc/cups/ppd/FS-1200.ppd \
         /usr/lib/cups/filter/pstops '157' 'dj' '' '1' '' pstops-157-in.ps 

This file causes the printer to output the following error:

        Error Name:		/undefined
        Offending Command:	n
        Operand Stack:
        

pstops-157-ok.ps - the output of running pstops as follows:

        PPD=/etc/cups/ppd/FS-1200.ppd \
         /usr/lib/cups/filter/pstops '157' 'dj' '' '1' 'outputorder=normal' pstops-157-in.ps 

This file prints normally.


And here's the difference between those two output files:

# diff -c pstops-157{,-ok}.ps | cat -tev
*** pstops-157.ps^I2006-12-19 00:01:48.000000000 -0500$
--- pstops-157-ok.ps^I2006-12-19 00:01:22.000000000 -0500$
***************$
*** 528,546 ****$
  FontName currentdict end definefont pop$
  %%EndResource$
  %%EndSetup$
- %%EOF$
- ^[%-12345X@PJL$
- @PJL RDYMSG DISPLAY = "READY"$
- @PJL EOJ$
- ^[%-12345X^[%-12345X@PJL$
- @PJL JOB NAME = "" DISPLAY = "157 dj "$
- @PJL RDYMSG DISPLAY = "157 dj "$
- @PJL SET ECONOMODE=OFF$
- @PJL ENTER LANGUAGE=POSTSCRIPT$
- %!PS-Adobe-3.0$
- %%Pages: (atend)$
- %%BoundingBox: (atend)$
- %%EndComments$
  %%Page: 1 1$
  %%PageBoundingBox: 0 0 612 792$
  %%BeginPageSetup$
--- 528,533 ----$



As an aside, /etc/cups/lpoptions contains the "outputorder=normal"
option, but it doesn't seem to affect printing from programs such as
gedit or evolution.  Running lp from the command line does result in the
option being specified to the cups filters.  Is it possible to have
lpoptions universally used?

Thanks,
Diab


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-k7
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages cupsys depends on:
ii  adduser                  3.100           Add and remove users and groups
ii  cupsys-common            1.2.7-1         Common UNIX Printing System(tm) - 
ii  debconf [debconf-2.0]    1.5.8           Debian configuration management sy
ii  gs-esp                   8.15.3.dfsg.1-1 The Ghostscript PostScript interpr
ii  libc6                    2.3.6.ds1-8     GNU C Library: Shared libraries
ii  libcupsimage2            1.2.7-1         Common UNIX Printing System(tm) - 
ii  libcupsys2               1.2.7-1         Common UNIX Printing System(tm) - 
ii  libdbus-1-3              1.0.2-1         simple interprocess messaging syst
ii  libgnutls13              1.4.4-3         the GNU TLS library - runtime libr
ii  libldap2                 2.1.30-13+b1    OpenLDAP libraries
ii  libpam0g                 0.79-4          Pluggable Authentication Modules l
ii  libpaper1                1.1.21          Library for handling paper charact
ii  libslp1                  1.2.1-6         OpenSLP libraries
ii  lsb-base                 3.1-22          Linux Standard Base 3.1 init scrip
ii  patch                    2.5.9-4         Apply a diff file to an original
ii  perl-modules             5.8.8-6.1       Core Perl modules
ii  poppler-utils [xpdf-util 0.4.5-5         PDF utilitites (based on libpopple
ii  procps                   1:3.2.7-3       /proc file system utilities
ii  zlib1g                   1:1.2.3-13      compression library - runtime

Versions of packages cupsys recommends:
ii  cupsys-client           1.2.7-1          Common UNIX Printing System(tm) - 
ii  foomatic-filters        3.0.2-20061031-1 linuxprinting.org printer support 
pn  smbclient               <none>           (no description available)

-- debconf information:
  cupsys/raw-print: true
  cupsys/backend: ipp, lpd, parallel, socket, usb

-- 
Diab Jerius <jerius@comcast.net>
*PPD-Adobe: "4.3"
*%
*% For information on using this, and to obtain the required backend
*% script, consult http://www.linuxprinting.org/
*%
*% This file is published under the GNU General Public License
*%
*% PPD-O-MATIC (3.0.0 or newer) generated this PPD file. It is for use with 
*% all programs and environments which use PPD files for dealing with
*% printer capability information. The printer must be configured with the
*% "foomatic-rip" backend filter script of Foomatic 3.0.0 or newer. This 
*% file and "foomatic-rip" work together to support PPD-controlled printer
*% driver option access with arbitrary free software printer drivers and
*% printing spoolers.
*%
*% To save this file on your disk, wait until the download has completed
*% (the animation of the browser logo must stop) and then use the
*% "Save as..." command in the "File" menu of your browser or in the 
*% pop-up manu when you click on this document with the right mouse button.
*% DO NOT cut and paste this file into an editor with your mouse. This can
*% introduce additional line breaks which lead to unexpected results.
*%
*% You may save this file as 'Kyocera-FS-1200-Postscript.ppd'
*%
*%
*FormatVersion:	"4.3"
*FileVersion:	"1.1"
*LanguageVersion: English 
*LanguageEncoding: ISOLatin1
*PCFileName:	"POSTSCRI.PPD"
*Manufacturer:	"Kyocera"
*Product:	"(FS-1200)"
*cupsVersion:	1.0
*cupsManualCopies: True
*cupsModelNumber:  2
*cupsFilter:	"application/vnd.cups-postscript 0 foomatic-rip"
*%pprRIP:        foomatic-rip other
*ModelName:     "Kyocera FS-1200"
*ShortNickName: "Kyocera FS-1200 Postscript"
*NickName:      "Kyocera FS-1200 Foomatic/Postscript (recommended)"
*PSVersion:	"(3010.000) 550"
*PSVersion:	"(3010.000) 651"
*PSVersion:	"(3010.000) 652"
*PSVersion:	"(3010.000) 653"
*PSVersion:	"(3010.000) 704"
*PSVersion:	"(3010.000) 705"
*PSVersion:	"(3010.000) 800"
*LanguageLevel:	"3"
*ColorDevice:	False
*DefaultColorSpace: Gray
*FileSystem:	False
*Throughput:	"1"
*LandscapeOrientation: Plus90
*TTRasterizer:	Type42
*1284DeviceID: "MFG:Kyocera;MDL:FS-1200;"



*VariablePaperSize: False

*FoomaticIDs: Kyocera-FS-1200 Postscript
*FoomaticRIPCommandLine: "level=%D; /usr/bin/printf &quot;%%!PS-Adobe\&&
n%%%% %%%%\n%C&quot;; if [ $level -gt 0 ]; then if [ $level -lt 99 ]; &&
then level=&quot; -dLanguageLevel=$level&quot;; else level=&quot;&quot&&
;; fi; gs -q -dPARANOIDSAFER -dNOPAUSE -dBATCH -sDEVICE=pswrite$level%&&
A%Z -sOutputFile=- -; else cat; fi"
*End

*OpenGroup: General/General

*OpenUI *PageSize/Page Size: PickOne
*OrderDependency: 100 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize 11x17/11x17: "<</PageSize[792 1224]/ImagingBBox null>>setpagedevice"
*PageSize A3/A3: "<</PageSize[842 1191]/ImagingBBox null>>setpagedevice"
*PageSize A5/A5: "<</PageSize[421 595]/ImagingBBox null>>setpagedevice"
*PageSize B5/B5 (JIS): "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
*PageSize Env10/Envelope #10: "<</PageSize[297 684]/ImagingBBox null>>setpagedevice"
*PageSize EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
*PageSize EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
*PageSize EnvISOB5/Envelope B5: "<</PageSize[499 709]/ImagingBBox null>>setpagedevice"
*PageSize EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageSize Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize

*OpenUI *PageRegion: PickOne
*OrderDependency: 100 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion 11x17/11x17: "<</PageSize[792 1224]/ImagingBBox null>>setpagedevice"
*PageRegion A3/A3: "<</PageSize[842 1191]/ImagingBBox null>>setpagedevice"
*PageRegion A5/A5: "<</PageSize[421 595]/ImagingBBox null>>setpagedevice"
*PageRegion B5/B5 (JIS): "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
*PageRegion Env10/Envelope #10: "<</PageSize[297 684]/ImagingBBox null>>setpagedevice"
*PageRegion EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
*PageRegion EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
*PageRegion EnvISOB5/Envelope B5: "<</PageSize[499 709]/ImagingBBox null>>setpagedevice"
*PageRegion EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageRegion Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "0 0 612 792"
*ImageableArea A4/A4: "0 0 595 842"
*ImageableArea 11x17/11x17: "0 0 792 1224"
*ImageableArea A3/A3: "0 0 842 1191"
*ImageableArea A5/A5: "0 0 421 595"
*ImageableArea B5/B5 (JIS): "0 0 516 729"
*ImageableArea Env10/Envelope #10: "0 0 297 684"
*ImageableArea EnvC5/Envelope C5: "0 0 459 649"
*ImageableArea EnvDL/Envelope DL: "0 0 312 624"
*ImageableArea EnvISOB5/Envelope B5: "0 0 499 709"
*ImageableArea EnvMonarch/Envelope Monarch: "0 0 279 540"
*ImageableArea Executive/Executive: "0 0 522 756"
*ImageableArea Legal/US Legal: "0 0 612 1008"

*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612 792"
*PaperDimension A4/A4: "595 842"
*PaperDimension 11x17/11x17: "792 1224"
*PaperDimension A3/A3: "842 1191"
*PaperDimension A5/A5: "421 595"
*PaperDimension B5/B5 (JIS): "516 729"
*PaperDimension Env10/Envelope #10: "297 684"
*PaperDimension EnvC5/Envelope C5: "459 649"
*PaperDimension EnvDL/Envelope DL: "312 624"
*PaperDimension EnvISOB5/Envelope B5: "499 709"
*PaperDimension EnvMonarch/Envelope Monarch: "279 540"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension Legal/US Legal: "612 1008"

*OpenUI *Resolution/Resolution: PickOne
*FoomaticRIPOption Resolution: enum CmdLine C
*OrderDependency: 110 AnySetup *Resolution
*DefaultResolution: default
*Resolution default/Printer Default: "%% FoomaticRIPOptionSetting: Resolution=default"
*FoomaticRIPOptionSetting Resolution=default: ""
*Resolution 150x150dpi/150 DPI: "%% FoomaticRIPOptionSetting: Resolution=150x150dpi"
*FoomaticRIPOptionSetting Resolution=150x150dpi: "&lt;&lt;/HWResolutio&&
n[150 150]&gt;&gt;setpagedevice\n"
*End
*Resolution 300x300dpi/300 DPI: "%% FoomaticRIPOptionSetting: Resolution=300x300dpi"
*FoomaticRIPOptionSetting Resolution=300x300dpi: "&lt;&lt;/HWResolutio&&
n[300 300]&gt;&gt;setpagedevice\n"
*End
*Resolution 600x600dpi/600 DPI: "%% FoomaticRIPOptionSetting: Resolution=600x600dpi"
*FoomaticRIPOptionSetting Resolution=600x600dpi: "&lt;&lt;/HWResolutio&&
n[600 600]&gt;&gt;setpagedevice\n"
*End
*CloseUI: *Resolution

*OpenUI *Duplex/Double-Sided Printing: PickOne
*FoomaticRIPOption Duplex: enum CmdLine C
*OrderDependency: 130 AnySetup *Duplex
*DefaultDuplex: None
*Duplex DuplexNoTumble/Long Edge (Standard): "%% FoomaticRIPOptionSetting: Duplex=DuplexNoTumble"
*FoomaticRIPOptionSetting Duplex=DuplexNoTumble: "&lt;&lt;/Duplex true&&
 /Tumble false&gt;&gt;setpagedevice\n"
*End
*Duplex DuplexTumble/Short Edge (Flip): "%% FoomaticRIPOptionSetting: Duplex=DuplexTumble"
*FoomaticRIPOptionSetting Duplex=DuplexTumble: "&lt;&lt;/Duplex true /&&
Tumble true&gt;&gt;setpagedevice\n"
*End
*Duplex None/Off: "%% FoomaticRIPOptionSetting: Duplex=None"
*FoomaticRIPOptionSetting Duplex=None: "&lt;&lt;/Duplex false&gt;&gt;s&&
etpagedevice\n"
*End
*CloseUI: *Duplex

*CloseGroup: General

*OpenGroup: Miscellaneous/Miscellaneous

*OpenUI *PreFilter/GhostScript pre-filtering: PickOne
*FoomaticRIPOption PreFilter: enum CmdLine D
*OrderDependency: 100 AnySetup *PreFilter
*DefaultPreFilter: No
*PreFilter EmbedFonts/Embed GhostScript fonts only: "%% FoomaticRIPOptionSetting: PreFilter=EmbedFonts"
*FoomaticRIPOptionSetting PreFilter=EmbedFonts: "99"
*PreFilter Level1/Convert to PS level 1: "%% FoomaticRIPOptionSetting: PreFilter=Level1"
*FoomaticRIPOptionSetting PreFilter=Level1: "1"
*PreFilter Level2/Convert to PS level 2: "%% FoomaticRIPOptionSetting: PreFilter=Level2"
*FoomaticRIPOptionSetting PreFilter=Level2: "2"
*PreFilter No/No pre-filtering: "%% FoomaticRIPOptionSetting: PreFilter=No"
*FoomaticRIPOptionSetting PreFilter=No: "0"
*CloseUI: *PreFilter

*CloseGroup: Miscellaneous


*% Generic boilerplate PPD stuff as standard PostScript fonts and so on

*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Demi: Standard "(001.004S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
*Font Bookman-Light: Standard "(001.004S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Standard ROM

Attachment: pstops-157-in.ps
Description: PostScript document

Attachment: pstops-157.ps
Description: PostScript document

Attachment: pstops-157-ok.ps
Description: PostScript document


Reply to: