Re: [PPC] Boot problems after the pci-v6.18-changes

[Herve Codina <herve.codina@bootlin.com>]

Hi Christian,

On Wed, 15 Oct 2025 13:30:44 +0200
Christian Zigotzky <chzigotzky@xenosoft.de> wrote:

> Hello Herve,
> 
> > On 15 October 2025 at 10:39 am, Herve Codina <herve.codina@bootlin.com> wrote:
> > 
> > Hi All,
> > 
> > I also observed issues with the commit f3ac2ff14834 ("PCI/ASPM: Enable all
> > ClockPM and ASPM states for devicetree platforms")  
> 
> Thanks for reporting.
> 
> > 
> > Also tried the quirk proposed in this discussion (quirk_disable_aspm_all)
> > an the quirk also fixes the timing issue.  
> 
> Where have you added quirk_disable_aspm_all?

--- 8< ---
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 214ed060ca1b..a3808ab6e92e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2525,6 +2525,17 @@ static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
  */
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);
 
+static void quirk_disable_aspm_all(struct pci_dev *dev)
+{
+       pci_info(dev, "Disabling ASPM\n");
+       pci_disable_link_state(dev, PCIE_LINK_STATE_ALL);
+}
+
+/* LAN966x PCI board */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, 0x9660, quirk_disable_aspm_all);
+
 /*
  * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
  * Link bit cleared after starting the link retrain process to allow this
--- 8< ---

Best regards,
Hervé