Re: ATA problems on G4 and G5 - was: Re: Updated Debian Ports installation images 2021-09-21
Hello,
On 2021-09-23 10:13:52 +0100 John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
Hello Kristoffer!
On 9/23/21 11:10, kristofferfin@tuta.io wrote:
After upgrading to 5.14.6, both my G5 and G4 machines won't boot
with this
kernel. They stop at this: .... ata1.00 failed to set xfermode
(err_mask =
0x40)
There was not a problem with 5.10.3 and 5.10.8 or at least went thru
with
that part.
Both machines are equipped with the SSDs.
You are the first to report this issue but I haven't tested this
kernel on my
own
hardware yet. Let's wait for others on this list to chime in and see
if they
have
run into the problem as well.
If others can reproduce the problem, it's time for bisecting the
kernel.
On my iMac G5 with serial ata (buit still the original apple spinning
rust HDD inside) all seems fine:
[ 0.908371] libata version 3.00 loaded.
[ 1.363301] pata-pci-macio 0001:02:0d.0: enabling device (0000 ->
0002)
[ 1.382290] pata-pci-macio 0001:02:0d.0: Activating pata-macio
chipset Shasta ATA-6, Apple bus ID 3
[ 1.390594] scsi host0: pata_macio
[ 1.391343] ata1: PATA max UDMA/133 irq 38
[ 1.552920] ata1.00: ATAPI: MATSHITADVD-R UJ-846, FA0G, max
UDMA/66
[ 1.565777] ata1.00: K2/Shasta alignment limits applied
[ 3.280150] sata_svw 0001:02:0c.0: version 2.3
[ 3.326633] scsi host1: sata_svw
[ 3.446662] scsi host2: sata_svw
[ 3.538050] scsi host3: sata_svw
[ 3.636359] scsi host4: sata_svw
[ 3.721705] ata2: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102000 irq 18
[ 3.732549] ata3: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102100 irq 18
[ 3.743191] ata4: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102200 irq 18
[ 3.753840] ata5: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102300 irq 18
[ 4.110612] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.124825] ata2.00: ATA-7: Maxtor 6L250M0, BANC1G10, max UDMA/133
[ 4.135634] ata2.00: 490234752 sectors, multi 0: LBA48 NCQ (not
used)
[ 4.155100] ata2.00: configured for UDMA/133
[ 4.593209] ata3: SATA link down (SStatus 4 SControl 300)
[ 5.645820] ata4: failed to resume link (SControl 0)
[ 5.657679] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.725830] ata5: failed to resume link (SControl 0)
[ 6.741523] ata5: SATA link down (SStatus 0 SControl 0)
[ 9.138995] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
[ 25.226642] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 29.050599] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
Riccardo
--
Sent with GNUMail from GNUstep on a Raspberry PI 4.
Reply to: