Re: iMac G3 r128 - failed to load module "r128"
Another update. I used the patch as provided by Adrian. I rebuilt the
driver and installed it on the iMac G3 / 500. The patch makes X work
much better, I get a lot further now. Unfortunately, after a lot of
fiddling around with xorg.conf files and ModeLines and stuff I gave up
for the moment. I always end up at a black screen (with or without KMS
enabled). I will give the last configuration / log files:
/usr/share/X11/xorg.conf.d/10-r128.conf:
-------------------------------
Section "Device"
Identifier "Configured Video Device"
Driver "r128"
Option "ForcePCIMode" "True"
BusID "PCI:0:16:0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 58-62
VertRefresh 75-117
ModeLine "1024x768_75.00" 78.75 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
#ModeLine "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798
-hsync +vsync
#ModeLine "800x600_60.00" 38.25 800 832 912 1024 600 603 607 624 -hsync
+vsync
#ModeLine "640x480_60.00" 23.75 640 664 720 800 480 483 487 500 -hsync
+vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 16
SubSection "Display"
Modes "1024x768" "800x600" "640x480'
EndSubSection
EndSection
-------------------------
/var/log/Xorg.0.log:
[ 68.180]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 68.181] Build Operating System: Linux 5.4.0-4-powerpc64 ppc Debian
[ 68.181] Current Operating System: Linux debian 5.5.0-2-powerpc #1
Debian 5.5.17-1 (2020-04-15) ppc
[ 68.181] Kernel command line:
BOOT_IMAGE=/boot/vmlinux-5.5.0-2-powerpc
root=UUID=7f7ffc1e-a688-4fe9-8eac-ac0c29ef7be8 ro quiet nomodeset
[ 68.181] Build Date: 31 March 2020 10:14:40AM
[ 68.181] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[ 68.181] Current version of pixman: 0.36.0
[ 68.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 68.182] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 68.193] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 26
11:26:28 2020
[ 69.277] (==) Using system config directory
"/usr/share/X11/xorg.conf.d"
[ 69.631] (==) No Layout section. Using the first Screen section.
[ 69.631] (**) |-->Screen "Default Screen" (0)
[ 69.631] (**) | |-->Monitor "Configured Monitor"
[ 69.634] (**) | |-->Device "Configured Video Device"
[ 69.634] (==) Automatically adding devices
[ 69.634] (==) Automatically enabling devices
[ 69.635] (==) Automatically adding GPU devices
[ 69.635] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 70.482] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 70.482] Entry deleted from font path.
[ 70.732] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 70.732] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.733] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 70.955] (II) Loader magic: 0xa1d738
[ 70.955] (II) Module ABI versions:
[ 70.955] X.Org ANSI C Emulation: 0.4
[ 70.955] X.Org Video Driver: 24.1
[ 70.955] X.Org XInput driver : 24.1
[ 70.955] X.Org Server Extension : 10.0
[ 70.966] (++) using VT number 7
[ 70.967] (II) systemd-logind: logind integration requires -keeptty
and -keeptty was not provided, disabling logind integration
[ 70.979] (--) PCI:*(0@0:16:0) 1002:5452:1002:5452 rev 0, Mem @
0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @
0x????????/131072
[ 71.126] (II) LoadModule: "glx"
[ 71.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 72.937] (II) Module glx: vendor="X.Org Foundation"
[ 72.938] compiled for 1.20.8, module version = 1.0.0
[ 72.938] ABI class: X.Org Server Extension, version 10.0
[ 72.938] (II) LoadModule: "r128"
[ 72.939] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 73.100] (II) Module r128: vendor="X.Org Foundation"
[ 73.101] compiled for 1.20.8, module version = 6.12.0
[ 73.101] Module class: X.Org Video Driver
[ 73.101] ABI class: X.Org Video Driver, version 24.1
[ 73.122] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 73.148] (**) R128(0): Depth 16, (--) framebuffer bpp 16
[ 73.149] (==) R128(0): Default visual is TrueColor
[ 73.149] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 73.149] (II) R128(0): PCI bus 0 card 16 func 0
[ 73.149] (II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16
bpp pixmaps)
[ 73.149] (**) R128(0): Option "ForcePCIMode" "True"
[ 73.150] (II) R128(0): Acceleration of RENDER operations will be
enabled upon successful loading of DRI and EXA.
[ 73.150] (**) R128(0): Using framebuffer device.
[ 73.150] (II) R128(0): VGAAccess option set to FALSE, VGA module
load skipped.
[ 73.150] (**) R128(0): Forced into PCI only mode.
[ 73.150] (==) R128(0): RGB weight 565
[ 73.150] (II) R128(0): Using 6 bits per RGB (8 bit DAC)
[ 73.150] (II) Loading sub module "fbdevhw"
[ 73.150] (II) LoadModule: "fbdevhw"
[ 73.151] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 73.245] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 73.245] compiled for 1.20.8, module version = 0.0.2
[ 73.245] ABI class: X.Org Video Driver, version 24.1
[ 73.246] (--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TR (AGP)"
(ChipID = 0x5452)
[ 73.246] (--) R128(0): Linear framebuffer at 0x94000000
[ 73.246] (--) R128(0): MMIO registers at 0x90000000
[ 73.246] (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
[ 73.246] (II) Loading sub module "ramdac"
[ 73.246] (II) LoadModule: "ramdac"
[ 73.246] (II) Module "ramdac" already built-in
[ 73.246] (II) Loading sub module "ddc"
[ 73.246] (II) LoadModule: "ddc"
[ 73.247] (II) Module "ddc" already built-in
[ 73.247] (II) Loading sub module "i2c"
[ 73.247] (II) LoadModule: "i2c"
[ 73.247] (II) Module "i2c" already built-in
[ 73.247] (WW) R128(0): Failed to read PCI ROM!
[ 73.258] (WW) R128(0): Video BIOS not found!
[ 73.258] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500
max=25000; xclk=13000
[ 73.258] (II) R128(0): Output VGA-0 using monitor section Configured
Monitor
[ 73.259] (II) R128(0): I2C bus "VGA-0" initialized.
[ 73.259] (II) R128(0): I2C device "VGA-0:ddc2" registered at address
0xA0.
[ 73.274] (II) Loading sub module "shadowfb"
[ 73.274] (II) LoadModule: "shadowfb"
[ 73.275] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 73.421] (II) Module shadowfb: vendor="X.Org Foundation"
[ 73.524] compiled for 1.20.8, module version = 1.0.0
[ 73.524] ABI class: X.Org ANSI C Emulation, version 0.4
[ 73.525] (II) R128(0): Page flipping disabled
[ 73.530] (II) R128(0): EDID for output VGA-0
[ 73.532] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (hsync out
of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (hsync out
of range)
[ 73.533] (II) R128(0): Not using default mode "1024x768i" (hsync out
of range)
[ 73.533] (II) R128(0): Not using default mode "1024x768" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "1024x768" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "1024x768" (hsync out
of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (vrefresh
out of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (hsync out
of range)
[ 73.533] (II) R128(0): Not using default mode "800x600" (hsync out
of range)
[ 73.534] (II) R128(0): Not using default mode "1024x768" (vrefresh
out of range)
[ 73.534] (II) R128(0): Not using default mode "1024x768" (hsync out
of range)
[ 73.534] (II) R128(0): Not using default mode "1024x768" (hsync out
of range)
[ 73.534] (II) R128(0): Printing probed modes for output VGA-0
[ 73.534] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz UdP)
[ 73.534] (II) R128(0): Modeline "1024x768_75.00"x75.0 78.75 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 73.534] (II) R128(0): Output VGA-0 connected
[ 73.534] (II) R128(0): Using user preference for initial modes
[ 73.534] (II) R128(0): Output VGA-0 using initial mode 1024x768 +0+0
[ 73.534] (==) R128(0): DPI set to (96, 96)
[ 73.534] (II) Loading sub module "fb"
[ 73.534] (II) LoadModule: "fb"
[ 73.535] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 73.849] (II) Module fb: vendor="X.Org Foundation"
[ 73.849] compiled for 1.20.8, module version = 1.0.0
[ 73.849] ABI class: X.Org ANSI C Emulation, version 0.4
[ 73.849] (II) R128(0): Loading EXA module...
[ 73.849] (II) Loading sub module "exa"
[ 73.849] (II) LoadModule: "exa"
[ 73.850] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 73.909] (II) Module exa: vendor="X.Org Foundation"
[ 73.909] compiled for 1.20.8, module version = 2.6.0
[ 73.909] ABI class: X.Org Video Driver, version 24.1
[ 73.909] (II) R128(0): Loading EXA module.
[ 74.013] drmOpenDevice: node name is /dev/dri/card0
[ 74.020] drmOpenDevice: node name is /dev/dri/card0
[ 74.122] [drm] failed to load kernel module "r128"
[ 74.123] (EE) [drm] drmOpen failed.
[ 74.123] (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI.
[ 74.604] (II) R128(0): Filling in EXA memory info
[ 74.604] (II) R128(0): Setting up EXA callbacks
[ 74.604] (II) R128(0): Initializing 2D acceleration engine...
[ 74.605] (II) R128(0): Initializing EXA driver...
[ 74.605] (II) EXA(0): Offscreen pixmap area of 15204352 bytes
[ 74.606] (II) EXA(0): Driver registered support for the following
operations:
[ 74.606] (II) Solid
[ 74.606] (II) Copy
[ 74.606] (II) R128(0): EXA Acceleration enabled.
[ 74.607] (==) R128(0): Backing store enabled
[ 74.607] (==) R128(0): Silken mouse enabled
[ 74.721] (II) R128(0): Will use 2 kb for hardware cursor 0 at offset
0x00fffc00
[ 74.721] (==) R128(0): DPMS enabled
[ 74.721] (WW) R128(0): Direct rendering disabled
[ 74.830] (II) Initializing extension Generic Event Extension
[ 74.838] (II) Initializing extension SHAPE
[ 74.840] (II) Initializing extension MIT-SHM
[ 74.842] (II) Initializing extension XInputExtension
[ 74.958] (II) Initializing extension XTEST
[ 74.965] (II) Initializing extension BIG-REQUESTS
[ 74.966] (II) Initializing extension SYNC
[ 74.969] (II) Initializing extension XKEYBOARD
[ 74.971] (II) Initializing extension XC-MISC
[ 74.973] (II) Initializing extension SECURITY
[ 74.975] (II) Initializing extension XFIXES
[ 74.976] (II) Initializing extension RENDER
[ 74.978] (II) Initializing extension RANDR
[ 74.982] (II) Initializing extension COMPOSITE
[ 74.984] (II) Initializing extension DAMAGE
[ 74.986] (II) Initializing extension MIT-SCREEN-SAVER
[ 74.989] (II) Initializing extension DOUBLE-BUFFER
[ 75.233] (II) Initializing extension RECORD
[ 75.235] (II) Initializing extension DPMS
[ 75.264] (II) Initializing extension Present
[ 75.266] (II) Initializing extension DRI3
[ 75.266] (II) Initializing extension X-Resource
[ 75.284] (II) Initializing extension XVideo
[ 75.286] (II) Initializing extension XVideo-MotionCompensation
[ 75.286] (II) Initializing extension SELinux
[ 75.286] (II) SELinux: Disabled on system
[ 75.286] (II) Initializing extension GLX
[ 75.398] (II) AIGLX: Screen 0 is not DRI2 capable
[ 92.832] (II) IGLX: Loaded and initialized swrast
[ 92.832] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 92.832] (II) Initializing extension XFree86-VidModeExtension
[ 92.834] (II) Initializing extension XFree86-DGA
[ 92.836] (II) Initializing extension XFree86-DRI
[ 92.836] (II) Initializing extension DRI2
[ 94.206] (II) config/udev: Adding input device PowerMac Beep
(/dev/input/event3)
[ 94.206] (II) No input driver specified, ignoring this device.
[ 94.206] (II) This device may have been added with another device
file.
[ 94.214] (II) config/udev: Adding input device Apple Inc. Apple
Keyboard (/dev/input/event1)
[ 94.214] (**) Apple Inc. Apple Keyboard: Applying InputClass
"libinput keyboard catchall"
[ 94.215] (II) LoadModule: "libinput"
[ 94.216] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 94.365] (II) Module libinput: vendor="X.Org Foundation"
[ 94.365] compiled for 1.20.4, module version = 0.29.0
[ 94.365] Module class: X.Org XInput Driver
[ 94.365] ABI class: X.Org XInput driver, version 24.1
[ 94.365] (II) Using input driver 'libinput' for 'Apple Inc. Apple
Keyboard'
[ 94.365] (**) Apple Inc. Apple Keyboard: always reports core events
[ 94.366] (**) Option "Device" "/dev/input/event1"
[ 94.369] (**) Option "_source" "server/udev"
[ 94.475] (II) event1 - Apple Inc. Apple Keyboard: is tagged by udev
as: Keyboard
[ 94.476] (II) event1 - Apple Inc. Apple Keyboard: device is a
keyboard
[ 94.478] (II) event1 - Apple Inc. Apple Keyboard: device removed
[ 94.479] (**) Option "config_info"
"udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:021E.0001/input/input1/event1"
[ 94.479] (II) XINPUT: Adding extended input device "Apple Inc. Apple
Keyboard" (type: KEYBOARD, id 6)
[ 94.479] (**) Option "xkb_model" "pc105"
[ 94.480] (**) Option "xkb_layout" "us"
[ 94.498] (II) event1 - Apple Inc. Apple Keyboard: is tagged by udev
as: Keyboard
[ 94.499] (II) event1 - Apple Inc. Apple Keyboard: device is a
keyboard
[ 94.524] (II) config/udev: Adding input device Apple Inc. Apple
Keyboard (/dev/input/event2)
[ 94.524] (**) Apple Inc. Apple Keyboard: Applying InputClass
"libinput keyboard catchall"
[ 94.525] (II) Using input driver 'libinput' for 'Apple Inc. Apple
Keyboard'
[ 94.525] (**) Apple Inc. Apple Keyboard: always reports core events
[ 94.525] (**) Option "Device" "/dev/input/event2"
[ 94.525] (**) Option "_source" "server/udev"
[ 94.541] (II) event2 - Apple Inc. Apple Keyboard: is tagged by udev
as: Keyboard
[ 94.542] (II) event2 - Apple Inc. Apple Keyboard: device is a
keyboard
[ 94.544] (II) event2 - Apple Inc. Apple Keyboard: device removed
[ 94.544] (**) Option "config_info"
"udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:021E.0002/input/input2/event2"
[ 94.544] (II) XINPUT: Adding extended input device "Apple Inc. Apple
Keyboard" (type: KEYBOARD, id 7)
[ 94.545] (**) Option "xkb_model" "pc105"
[ 94.545] (**) Option "xkb_layout" "us"
[ 94.562] (II) event2 - Apple Inc. Apple Keyboard: is tagged by udev
as: Keyboard
[ 94.563] (II) event2 - Apple Inc. Apple Keyboard: device is a
keyboard
[ 94.573] (II) config/udev: Adding input device PMU
(/dev/input/event0)
[ 94.573] (**) PMU: Applying InputClass "libinput keyboard catchall"
[ 94.573] (II) Using input driver 'libinput' for 'PMU'
[ 94.573] (**) PMU: always reports core events
[ 94.573] (**) Option "Device" "/dev/input/event0"
[ 94.573] (**) Option "_source" "server/udev"
[ 94.578] (II) event0 - PMU: is tagged by udev as: Keyboard Switch
[ 94.579] (II) event0 - PMU: device is a keyboard
[ 94.579] (II) event0 - PMU: device is a switch device
[ 94.580] (II) event0 - PMU: device removed
[ 94.581] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input0/event0"
[ 94.581] (II) XINPUT: Adding extended input device "PMU" (type:
KEYBOARD, id 8)
[ 94.581] (**) Option "xkb_model" "pc105"
[ 94.581] (**) Option "xkb_layout" "us"
[ 94.588] (II) event0 - PMU: is tagged by udev as: Keyboard Switch
[ 94.588] (II) event0 - PMU: device is a keyboard
[ 94.588] (II) event0 - PMU: device is a switch device
[ 94.594] (II) config/udev: Adding input device Mouseemu virtual
keyboard (/dev/input/event4)
[ 94.594] (**) Mouseemu virtual keyboard: Applying InputClass
"libinput keyboard catchall"
[ 94.594] (II) Using input driver 'libinput' for 'Mouseemu virtual
keyboard'
[ 94.594] (**) Mouseemu virtual keyboard: always reports core events
[ 94.594] (**) Option "Device" "/dev/input/event4"
[ 94.594] (**) Option "_source" "server/udev"
[ 94.600] (II) event4 - Mouseemu virtual keyboard: is tagged by udev
as: Keyboard
[ 94.601] (II) event4 - Mouseemu virtual keyboard: device is a
keyboard
[ 94.601] (II) event4 - Mouseemu virtual keyboard: device removed
[ 94.602] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input4/event4"
[ 94.602] (II) XINPUT: Adding extended input device "Mouseemu virtual
keyboard" (type: KEYBOARD, id 9)
[ 94.602] (**) Option "xkb_model" "pc105"
[ 94.602] (**) Option "xkb_layout" "us"
[ 94.609] (II) event4 - Mouseemu virtual keyboard: is tagged by udev
as: Keyboard
[ 94.610] (II) event4 - Mouseemu virtual keyboard: device is a
keyboard
[ 94.615] (II) config/udev: Adding input device Mouseemu virtual
mouse (/dev/input/event5)
[ 94.615] (**) Mouseemu virtual mouse: Applying InputClass "libinput
pointer catchall"
[ 94.615] (II) Using input driver 'libinput' for 'Mouseemu virtual
mouse'
[ 94.615] (**) Mouseemu virtual mouse: always reports core events
[ 94.615] (**) Option "Device" "/dev/input/event5"
[ 94.615] (**) Option "_source" "server/udev"
[ 94.621] (II) event5 - Mouseemu virtual mouse: is tagged by udev
as: Mouse
[ 94.622] (II) event5 - Mouseemu virtual mouse: device is a pointer
[ 94.622] (II) event5 - Mouseemu virtual mouse: device removed
[ 94.623] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input5/event5"
[ 94.623] (II) XINPUT: Adding extended input device "Mouseemu virtual
mouse" (type: MOUSE, id 10)
[ 94.625] (**) Option "AccelerationScheme" "none"
[ 94.625] (**) Mouseemu virtual mouse: (accel) selected scheme none/0
[ 94.625] (**) Mouseemu virtual mouse: (accel) acceleration factor:
2.000
[ 94.625] (**) Mouseemu virtual mouse: (accel) acceleration
threshold: 4
[ 94.630] (II) event5 - Mouseemu virtual mouse: is tagged by udev
as: Mouse
[ 94.631] (II) event5 - Mouseemu virtual mouse: device is a pointer
[ 94.635] (II) config/udev: Adding input device Mouseemu virtual
mouse (/dev/input/mouse0)
[ 94.635] (II) No input driver specified, ignoring this device.
[ 94.635] (II) This device may have been added with another device
file.
[ 117.678] (II) event1 - Apple Inc. Apple Keyboard: device removed
[ 117.701] (II) event2 - Apple Inc. Apple Keyboard: device removed
[ 117.703] (II) event0 - PMU: device removed
[ 117.721] (II) event4 - Mouseemu virtual keyboard: device removed
[ 117.736] (II) event5 - Mouseemu virtual mouse: device removed
[ 117.825] (II) UnloadModule: "libinput"
[ 117.825] (II) UnloadModule: "libinput"
[ 117.826] (II) UnloadModule: "libinput"
[ 117.826] (II) UnloadModule: "libinput"
[ 117.840] (II) UnloadModule: "libinput"
[ 119.297] (II) Server terminated successfully (0). Closing log file.
Reply to: