Re: Debian Install on G5
I just added the grub parameter "radeon.agpmode=4"
Here we go:
root@debian-g5:/home/bencz# dmesg
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12,
vmemmap = 24
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 5.4.0-2-powerpc64
(debian-kernel@lists.debian.org) (gcc version 9.2.1 20200104 (Debian
9.2.1-22)) #1 SMP Debian 5.4.8-1 (2020-01-05)
[ 0.000000] Found initrd at 0xc000000003a00000:0xc000000005efb3d1
[ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000
revision: 0xb3
[ 0.000000] Mapped at 0xc00a000080000000
[ 0.000000] Found a K2 mac-io controller, rev: 32, mapped at
0x(____ptrval____)
[ 0.000000] PowerMac motherboard: PowerMac G5
[ 0.000000] DART table allocated at: (____ptrval____)
[ 0.000000] DART IOMMU initialized for U3 type chipset
[ 0.000000] Using PowerMac machine description
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Allocated 4624 bytes for 2 pacas
[ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x100000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x00000100900c21aa
[ 0.000000] possible = 0x0001fbefffffb1af
[ 0.000000] always = 0x00000000000001a0
[ 0.000000] cpu_user_features = 0xdc080000 0x00000000
[ 0.000000] mmu_features = 0x0c008001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] vmalloc start = 0xc008000000000000
[ 0.000000] IO start = 0xc00a000000000000
[ 0.000000] vmemmap start = 0xc00c000000000000
[ 0.000000] hash-mmu: ppc64_pft_size = 0x0
[ 0.000000] hash-mmu: htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] cma: Reserved 208 MiB at 0x000000016b000000
[ 0.000000] numa: NODE_DATA [mem 0x17ffc9f80-0x17ffcefff]
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff ->
0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff ->
0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1485, gen1=1486
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] barrier-nospec: patched 434 locations
[ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x000000017fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:3
[ 0.000000] percpu: Embedded 11 pages/cpu s632216 r0 d88680 u1048576
[ 0.000000] pcpu-alloc: s632216 r0 d88680 u1048576 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65472
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinux-5.4.0-2-powerpc64
root=UUID=33d74b0d-b10d-487c-bb3b-1d01303cea68 ro quiet radeon.agpmode=4
[ 0.000000] Dentry cache hash table entries: 524288 (order: 6,
4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3745408K/4194304K available (11456K kernel code,
2624K rwdata, 2688K rodata, 6400K init, 1450K bss, 235904K reserved,
212992K cma-reserved)
[ 0.000000] random: get_random_u64 called from
.__kmem_cache_create+0x58/0x750 with crng_init=0
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 29558 entries in 11 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to
nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at
80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 120 sources
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at
f8040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 120 sources
[ 0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2000.000000 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff
max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns
[ 0.000008] clocksource: timebase mult[1e000005] shift[24] registered
[ 0.000025] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000139] Console: colour dummy device 80x25
[ 0.000144] printk: console [tty0] enabled
[ 0.000147] printk: bootconsole [udbg0] disabled
[ 0.000486] pid_max: default: 32768 minimum: 301
[ 0.000867] LSM: Security Framework initializing
[ 0.001057] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001140] AppArmor: AppArmor initialized
[ 0.001146] TOMOYO Linux initialized
[ 0.001246] Mount-cache hash table entries: 8192 (order: 0, 65536
bytes, linear)
[ 0.001264] Mountpoint-cache hash table entries: 8192 (order: 0,
65536 bytes, linear)
[ 0.003416] PowerMac SMP probe found 2 cpus
[ 0.003610] KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000
[ 0.003617] channel 0 bus <multibus>
[ 0.003621] channel 1 bus <multibus>
[ 0.003698] KeyWest i2c @0x80018000 irq 26
/ht@0,f2000000/pci@3/mac-io@7/i2c@18000
[ 0.003703] channel 0 bus <multibus>
[ 0.003758] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
[ 0.003762] channel 1 bus <multibus>
[ 0.003765] channel 2 bus <multibus>
[ 0.003897] Processor timebase sync using Cypress i2c clock
[ 0.003900] mpic: requesting IPIs...
[ 0.004509] PPC970/FX/MP performance monitor hardware support registered
[ 0.004614] rcu: Hierarchical SRCU implementation.
[ 0.006000] smp: Bringing up secondary CPUs ...
[ 0.066522] smp: Brought up 1 node, 2 CPUs
[ 0.066987] Using standard scheduler topology
[ 0.068057] devtmpfs: initialized
[ 0.099654] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.099667] futex hash table entries: 512 (order: 0, 65536 bytes, linear)
[ 0.100742] NET: Registered protocol family 16
[ 0.100790] eeh_init: Platform EEH operation not found
[ 0.100957] IBM eBus Device Driver
[ 0.101413] audit: initializing netlink subsys (disabled)
[ 0.101752] audit: type=2000 audit(1579193380.040:1):
state=initialized audit_enabled=0 res=1
[ 0.102183] cpuidle: using governor ladder
[ 0.102200] cpuidle: using governor menu
[ 0.138311] PCI: Probing PCI hardware
[ 0.138465] PCI host bridge to bus 0000:f0
[ 0.138475] pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff]
(bus address [0x0000-0x7fffff])
[ 0.138480] pci_bus 0000:f0: root bus resource [mem
0xf1000000-0xf1ffffff]
[ 0.138485] pci_bus 0000:f0: root bus resource [mem
0x90000000-0xafffffff]
[ 0.138491] pci_bus 0000:f0: root bus resource [bus f0-ff]
[ 0.138500] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to ff
[ 0.139195] pci 0000:f0:0b.0: [106b:004b] type 00 class 0x060000
[ 0.139739] pci 0000:f0:10.0: [1002:4150] type 00 class 0x030000
[ 0.139775] pci 0000:f0:10.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.139789] pci 0000:f0:10.0: reg 0x14: [io 0x10400-0x104ff]
[ 0.139802] pci 0000:f0:10.0: reg 0x18: [mem 0x90000000-0x9000ffff]
[ 0.139843] pci 0000:f0:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.139898] pci 0000:f0:10.0: supports D1 D2
[ 0.143693] IOMMU table initialized, virtual merging enabled
[ 0.143819] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to f0
[ 0.143967] PCI host bridge to bus 0001:00
[ 0.143974] pci_bus 0001:00: root bus resource [io 0x820000-0xc1ffff]
(bus address [0x0000-0x3fffff])
[ 0.143978] pci_bus 0001:00: root bus resource [mem
0xfa000000-0xffffffff]
[ 0.143983] pci_bus 0001:00: root bus resource [mem
0x80000000-0x8fffffff]
[ 0.143987] pci_bus 0001:00: root bus resource [mem
0xb0000000-0xefffffff]
[ 0.143992] pci_bus 0001:00: root bus resource [bus 00-ef]
[ 0.144001] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
[ 0.144034] pci 0001:00:00.0: [106b:004a] type 00 class 0x060000
[ 0.144329] pci 0001:00:01.0: [1022:7450] type 01 class 0x060400
[ 0.144601] pci 0001:00:02.0: [1022:7450] type 01 class 0x060400
[ 0.144863] pci 0001:00:03.0: [106b:0045] type 01 class 0x060400
[ 0.145207] pci 0001:00:04.0: [106b:0046] type 01 class 0x060400
[ 0.145480] pci 0001:00:05.0: [106b:0047] type 01 class 0x060400
[ 0.145741] pci 0001:00:06.0: [106b:0048] type 01 class 0x060400
[ 0.146004] pci 0001:00:07.0: [106b:0049] type 01 class 0x060400
[ 0.147588] pci_bus 0001:06: extended config space not accessible
[ 0.149293] pci 0001:00:01.0: PCI bridge to [bus 06]
[ 0.149336] pci_bus 0001:07: extended config space not accessible
[ 0.151045] pci 0001:00:02.0: PCI bridge to [bus 07]
[ 0.151093] pci_bus 0001:01: extended config space not accessible
[ 0.151535] pci 0001:01:07.0: [106b:0041] type 00 class 0xff0000
[ 0.151561] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.151816] pci 0001:01:08.0: [106b:0040] type 00 class 0x0c0310
[ 0.151839] pci 0001:01:08.0: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.152070] pci 0001:01:09.0: [106b:0040] type 00 class 0x0c0310
[ 0.152091] pci 0001:01:09.0: reg 0x10: [mem 0x80080000-0x80080fff]
[ 0.153422] pci 0001:00:03.0: PCI bridge to [bus 01]
[ 0.153435] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.153442] pci 0001:00:03.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.153601] pci_bus 0001:02: extended config space not accessible
[ 0.154266] pci 0001:02:0b.0: [1033:0035] type 00 class 0x0c0310
[ 0.154292] pci 0001:02:0b.0: reg 0x10: [mem 0x80102000-0x80102fff]
[ 0.154373] pci 0001:02:0b.0: supports D1 D2
[ 0.154377] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154550] pci 0001:02:0b.1: [1033:0035] type 00 class 0x0c0310
[ 0.154569] pci 0001:02:0b.1: reg 0x10: [mem 0x80101000-0x80101fff]
[ 0.154646] pci 0001:02:0b.1: supports D1 D2
[ 0.154650] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154863] pci 0001:02:0b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.154885] pci 0001:02:0b.2: reg 0x10: [mem 0x80100000-0x801000ff]
[ 0.154963] pci 0001:02:0b.2: supports D1 D2
[ 0.154967] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156195] pci 0001:00:04.0: PCI bridge to [bus 02]
[ 0.156210] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff]
[ 0.156217] pci 0001:00:04.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.156354] pci_bus 0001:03: extended config space not accessible
[ 0.157114] pci 0001:03:0d.0: [106b:0043] type 00 class 0xff0000
[ 0.157136] pci 0001:03:0d.0: reg 0x10: [mem 0x80204000-0x80207fff]
[ 0.157378] pci 0001:03:0e.0: [106b:0042] type 00 class 0x0c0010
[ 0.157399] pci 0001:03:0e.0: reg 0x10: [mem 0x80200000-0x80200fff]
[ 0.157472] pci 0001:03:0e.0: supports D1 D2
[ 0.157476] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.158524] pci 0001:00:05.0: PCI bridge to [bus 03]
[ 0.158537] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff]
[ 0.158544] pci 0001:00:05.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.158673] pci_bus 0001:04: extended config space not accessible
[ 0.159565] pci 0001:04:0f.0: [106b:004c] type 00 class 0x020000
[ 0.159593] pci 0001:04:0f.0: reg 0x10: [mem 0x80400000-0x805fffff]
[ 0.159637] pci 0001:04:0f.0: reg 0x30: [mem 0x80300000-0x803fffff pref]
[ 0.160655] pci 0001:00:06.0: PCI bridge to [bus 04]
[ 0.160669] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff]
[ 0.160676] pci 0001:00:06.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.160775] pci_bus 0001:05: extended config space not accessible
[ 0.161482] pci 0001:05:0c.0: [1166:0240] type 00 class 0x01018f
[ 0.161506] pci 0001:05:0c.0: reg 0x10: [io 0x820000-0x820007]
[ 0.161517] pci 0001:05:0c.0: reg 0x14: [io 0x820000-0x820003]
[ 0.161528] pci 0001:05:0c.0: reg 0x18: [io 0x820000-0x820007]
[ 0.161539] pci 0001:05:0c.0: reg 0x1c: [io 0x820000-0x820003]
[ 0.161549] pci 0001:05:0c.0: reg 0x20: [io 0x820000-0x82000f]
[ 0.161560] pci 0001:05:0c.0: reg 0x24: [mem 0x80600000-0x80601fff]
[ 0.162728] pci 0001:00:07.0: PCI bridge to [bus 05]
[ 0.162742] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff]
[ 0.162749] pci 0001:00:07.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.162850] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 07
[ 0.163043] PCI 0000:f0 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.163057] pci_bus 0000:f0: resource 4 [io 0x10000-0x80ffff]
[ 0.163061] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.163065] pci_bus 0000:f0: resource 6 [mem 0x90000000-0xafffffff]
[ 0.163082] pci 0001:00:01.0: PCI bridge to [bus 06]
[ 0.163092] pci 0001:00:02.0: PCI bridge to [bus 07]
[ 0.163101] pci 0001:00:03.0: PCI bridge to [bus 01]
[ 0.163107] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.163116] pci 0001:00:04.0: PCI bridge to [bus 02]
[ 0.163122] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff]
[ 0.163130] pci 0001:00:05.0: PCI bridge to [bus 03]
[ 0.163135] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff]
[ 0.163143] pci 0001:00:06.0: PCI bridge to [bus 04]
[ 0.163149] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff]
[ 0.163157] pci 0001:00:07.0: PCI bridge to [bus 05]
[ 0.163163] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff]
[ 0.163171] pci_bus 0001:00: resource 4 [io 0x820000-0xc1ffff]
[ 0.163175] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
[ 0.163179] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.163183] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff]
[ 0.163188] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
[ 0.163193] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff]
[ 0.163198] pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff]
[ 0.163203] pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff]
[ 0.163207] pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff]
[ 0.163240] PCI: Probing PCI hardware done
[ 0.173729] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages
[ 0.834823] iommu: Default domain type: Translated
[ 0.835048] pci 0000:f0:10.0: vgaarb: VGA device added:
decodes=io+mem,owns=mem,locks=none
[ 0.835090] pci 0000:f0:10.0: vgaarb: bridge control possible
[ 0.835096] pci 0000:f0:10.0: vgaarb: setting as boot device (VGA
legacy resources not available)
[ 0.835098] vgaarb: loaded
[ 0.835525] SCSI subsystem initialized
[ 0.835774] libata version 3.00 loaded.
[ 0.836553] clocksource: Switched to clocksource timebase
[ 0.886485] VFS: Disk quotas dquot_6.6.0
[ 0.886618] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536
bytes)
[ 0.887306] AppArmor: AppArmor Filesystem Enabled
[ 0.893646] random: fast init done
[ 0.893922] thermal_sys: Registered thermal governor 'fair_share'
[ 0.893925] thermal_sys: Registered thermal governor 'step_wise'
[ 0.894249] NET: Registered protocol family 2
[ 0.894719] tcp_listen_portaddr_hash hash table entries: 4096 (order:
0, 65536 bytes, linear)
[ 0.894793] TCP established hash table entries: 32768 (order: 2,
262144 bytes, linear)
[ 0.895028] TCP bind hash table entries: 32768 (order: 3, 524288
bytes, linear)
[ 0.895934] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.896121] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
[ 0.896194] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes,
linear)
[ 0.896466] NET: Registered protocol family 1
[ 0.896489] NET: Registered protocol family 44
[ 0.896531] pci 0000:f0:10.0: CLS mismatch (32 != 64), using 128 bytes
[ 0.896611] pci 0001:00:01.0: MSI quirk detected; subordinate MSI
disabled
[ 0.896617] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC
[ 0.896624] pci 0001:00:02.0: MSI quirk detected; subordinate MSI
disabled
[ 0.896628] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC
[ 0.896683] pci 0001:01:08.0: enabling device (0000 -> 0002)
[ 0.896744] pci 0001:01:09.0: enabling device (0000 -> 0002)
[ 0.896786] pci 0001:02:0b.0: enabling device (0000 -> 0002)
[ 0.896820] pci 0001:02:0b.1: enabling device (0000 -> 0002)
[ 0.896853] pci 0001:02:0b.2: enabling device (0004 -> 0006)
[ 0.897071] Trying to unpack rootfs image as initramfs...
[ 2.864150] Freeing initrd memory: 37824K
[ 2.866602] Initialise system trusted keyrings
[ 2.866657] Key type blacklist registered
[ 2.866914] workingset: timestamp_bits=38 max_order=16 bucket_order=0
[ 2.872117] zbud: loaded
[ 2.873225] Platform Keyring initialized
[ 2.873236] Key type asymmetric registered
[ 2.873239] Asymmetric key parser 'x509' registered
[ 2.873271] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 2.873473] io scheduler mq-deadline registered
[ 2.874118] Using unsupported 640x480 (null) at a8008000, depth=8,
pitch=768
[ 2.874558] Console: switching to colour frame buffer device 80x30
[ 2.882807] fb0: Open Firmware frame buffer device on
/pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_A@0
[ 2.882945] Using unsupported 640x480 (null) at a2008000, depth=8,
pitch=768
[ 2.882972] checking generic (a8008000 5a000) vs hw (a2008000 5a000)
[ 2.883161] fb1: Open Firmware frame buffer device on
/pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_B@1
[ 2.883349] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.884433] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh@kernel.crashing.org>)
[ 2.884606] Non-volatile memory driver v1.3
[ 2.884610] Linux agpgart interface v0.103
[ 2.884652] agpgart-uninorth 0000:f0:0b.0: Apple U3 chipset
[ 2.892171] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
[ 2.892374] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
[ 2.892788] MacIO PCI driver attached to K2 chipset
[ 2.894146] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 2.894752] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 2.895454] pata-pci-macio 0001:03:0d.0: enabling device (0010 -> 0012)
[ 2.912572] pata-pci-macio 0001:03:0d.0: Activating pata-macio
chipset K2 ATA-6, Apple bus ID 3
[ 2.913290] scsi host0: pata_macio
[ 2.913624] ata1: PATA max UDMA/100 irq 39
[ 2.914174] mousedev: PS/2 mouse device common for all mice
[ 2.914604] rtc-generic rtc-generic: registered as rtc0
[ 2.914752] PowerMac i2c bus pmu 2 registered
[ 2.914853] PowerMac i2c bus pmu 1 registered
[ 2.914946] PowerMac i2c bus mac-io 0 registered
[ 2.915026] i2c i2c-2: No i2c address for
/ht@0,f2000000/pci@3/mac-io@7/i2c@18000/i2c-modem
[ 2.915464] PowerMac i2c bus u3 1 registered
[ 2.915583] i2c i2c-3: i2c-powermac: modalias failure on
/u3@0,f8000000/i2c@f8001000/cereal@1c0
[ 2.916036] PowerMac i2c bus u3 0 registered
[ 2.956756] pmac64_cpufreq: Registering G5 CPU frequency driver
[ 2.956760] pmac64_cpufreq: Frequency method: i2c/pfunc, Voltage
method: i2c/pfunc
[ 2.956764] pmac64_cpufreq: Low: 1304 Mhz, High: 2000 Mhz, Cur: 1304 MHz
[ 2.982892] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.982936] drop_monitor: Initializing network drop monitor service
[ 2.983421] NET: Registered protocol family 10
[ 3.036985] Segment Routing with IPv6
[ 3.037042] mip6: Mobile IPv6
[ 3.037049] NET: Registered protocol family 17
[ 3.037157] mpls_gso: MPLS GSO support
[ 3.037241] drmem: No dynamic reconfiguration memory found
[ 3.037447] registered taskstats version 1
[ 3.037450] Loading compiled-in X.509 certificates
[ 3.092996] ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66
[ 3.122507] blk_queue_max_segment_size: set to minimum 65536
[ 3.126776] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B
C006 PQ: 0 ANSI: 5
[ 3.126791] ata1.00: K2/Shasta alignment limits applied
[ 3.145675] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.145720] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 3.145803] zswap: loaded using pool lzo/zbud
[ 3.146151] Key type ._fscrypt registered
[ 3.146153] Key type .fscrypt registered
[ 3.146185] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.146813] input: PMU as /devices/virtual/input/input0
[ 3.147141] rtc-generic rtc-generic: setting system clock to
2020-01-16T16:49:44 UTC (1579193384)
[ 3.170345] Freeing unused kernel memory: 6400K
[ 3.170350] This architecture does not have kernel memory protection.
[ 3.170357] Run /init as init process
[ 3.450098] drm_panel_orientation_quirks: module verification failed:
signature and/or required key missing - tainting kernel
[ 3.499990] usbcore: registered new interface driver usbfs
[ 3.500021] usbcore: registered new interface driver hub
[ 3.508885] usbcore: registered new device driver usb
[ 3.517088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.518052] ehci-pci: EHCI PCI platform driver
[ 3.518252] ehci-pci 0001:02:0b.2: EHCI Host Controller
[ 3.518270] ehci-pci 0001:02:0b.2: new USB bus registered, assigned
bus number 1
[ 3.518519] ehci-pci 0001:02:0b.2: irq 63, io mem 0x80100000
[ 3.526227] synth uevent: /devices/vio: failed to send uevent
[ 3.526234] vio vio: uevent: failed to send synthetic uevent
[ 3.532649] ehci-pci 0001:02:0b.2: USB 2.0 started, EHCI 1.00
[ 3.532945] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 3.532948] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.532951] usb usb1: Product: EHCI Host Controller
[ 3.532953] usb usb1: Manufacturer: Linux 5.4.0-2-powerpc64 ehci_hcd
[ 3.532956] usb usb1: SerialNumber: 0001:02:0b.2
[ 3.540026] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
[ 3.540670] hub 1-0:1.0: USB hub found
[ 3.540749] hub 1-0:1.0: 5 ports detected
[ 3.544148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.545525] ohci-pci: OHCI PCI platform driver
[ 3.545677] ohci-pci 0001:01:08.0: OHCI PCI host controller
[ 3.545694] ohci-pci 0001:01:08.0: new USB bus registered, assigned
bus number 2
[ 3.545840] ohci-pci 0001:01:08.0: irq 27, io mem 0x80081000
[ 3.553325] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 3.556442] gem 0001:04:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT
Ethernet 00:0a:95:bb:25:36
[ 3.566239] sata_svw 0001:05:0c.0: version 2.3
[ 3.567971] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw
xa/form2 cdda tray
[ 3.567988] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.586262] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.596916] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 3.599143] scsi host1: sata_svw
[ 3.621625] scsi host2: sata_svw
[ 3.647814] scsi host3: sata_svw
[ 3.652517] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 3.652526] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.652574] usb usb2: Product: OHCI PCI host controller
[ 3.652576] usb usb2: Manufacturer: Linux 5.4.0-2-powerpc64 ohci_hcd
[ 3.652579] usb usb2: SerialNumber: 0001:01:08.0
[ 3.654020] hub 2-0:1.0: USB hub found
[ 3.654093] hub 2-0:1.0: 2 ports detected
[ 3.654511] ohci-pci 0001:01:09.0: OHCI PCI host controller
[ 3.654525] ohci-pci 0001:01:09.0: new USB bus registered, assigned
bus number 3
[ 3.654680] ohci-pci 0001:01:09.0: irq 28, io mem 0x80080000
[ 3.669738] scsi host4: sata_svw
[ 3.669929] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600000 irq 16
[ 3.669933] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600100 irq 16
[ 3.669937] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600200 irq 16
[ 3.669940] ata5: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600300 irq 16
[ 3.701487] [drm] radeon kernel modesetting enabled.
[ 3.701612] radeon 0000:f0:10.0: remove_conflicting_pci_framebuffers:
bar 0: 0xa0000000 -> 0xafffffff
[ 3.701615] radeon 0000:f0:10.0: remove_conflicting_pci_framebuffers:
bar 2: 0x90000000 -> 0x9000ffff
[ 3.701619] checking generic (a8008000 5a000) vs hw (a0000000 10000000)
[ 3.701621] fb0: switching to radeondrmfb from OFfb ATY,Simone
[ 3.701860] Console: switching to colour dummy device 80x25
[ 3.701949] checking generic (a2008000 5a000) vs hw (a0000000 10000000)
[ 3.701951] fb1: switching to radeondrmfb from OFfb ATY,Simone
[ 3.703153] radeon 0000:f0:10.0: vgaarb: deactivate vga console
[ 3.703331] radeon 0000:f0:10.0: enabling device (0006 -> 0007)
[ 3.704773] [drm] initializing kernel modesetting (RV350
0x1002:0x4150 0x1002:0x4150 0x00).
[ 3.704981] radeon 0000:f0:10.0: Invalid PCI ROM header signature:
expecting 0xaa55, got 0xffff
[ 3.795313] [drm] Not an x86 BIOS ROM, not using.
[ 3.795394] [drm] Using device-tree clock info
[ 3.795408] [drm] AGP mode requested: 4
[ 3.795438] agpgart-uninorth 0000:f0:0b.0: putting AGP V3 device into
4x mode
[ 3.795447] radeon 0000:f0:10.0: putting AGP V3 device into 4x mode
[ 3.795543] radeon 0000:f0:10.0: GTT: 256M 0x00000000 - 0x0FFFFFFF
[ 3.795550] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.795555] radeon 0000:f0:10.0: VRAM: 256M 0x00000000A0000000 -
0x00000000AFFFFFFF (64M used)
[ 3.795632] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.795634] [drm] RAM width 128bits DDR
[ 3.796743] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 3.796749] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.796751] usb usb3: Product: OHCI PCI host controller
[ 3.796754] usb usb3: Manufacturer: Linux 5.4.0-2-powerpc64 ohci_hcd
[ 3.796756] usb usb3: SerialNumber: 0001:01:09.0
[ 3.796931] [TTM] Zone kernel: Available graphics memory: 2034272 KiB
[ 3.796936] [TTM] Initializing pool allocator
[ 3.796951] [TTM] Initializing DMA pool allocator
[ 3.797192] [drm] radeon: 64M of VRAM memory ready
[ 3.797196] [drm] radeon: 256M of GTT memory ready.
[ 3.797307] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 3.798164] hub 3-0:1.0: USB hub found
[ 3.798196] hub 3-0:1.0: 2 ports detected
[ 3.800183] radeon 0000:f0:10.0: WB disabled
[ 3.800200] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr
0x0000000000000000 and cpu addr 0x(____ptrval____)
[ 3.800212] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.800214] [drm] Driver supports precise vblank timestamp query.
[ 3.800274] [drm] radeon: irq initialized.
[ 3.800316] [drm] Loading R300 Microcode
[ 3.800403] radeon 0000:f0:10.0: firmware: failed to load
radeon/R300_cp.bin (-2)
[ 3.800418] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 3.800427] radeon 0000:f0:10.0: Direct firmware load for
radeon/R300_cp.bin failed with error -2
[ 3.800664] [drm:.r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.800668] ohci-pci 0001:02:0b.0: OHCI PCI host controller
[ 3.800700] ohci-pci 0001:02:0b.0: new USB bus registered, assigned
bus number 4
[ 3.800754] radeon 0000:f0:10.0: failed initializing CP (-2).
[ 3.800765] radeon 0000:f0:10.0: Disabling GPU acceleration
[ 3.800784] [drm] radeon: cp finalized
[ 3.800840] ohci-pci 0001:02:0b.0: irq 63, io mem 0x80102000
[ 3.800902] [drm] radeon: cp finalized
[ 3.800965] [TTM] Finalizing pool allocator
[ 3.805152] [TTM] Finalizing DMA pool allocator
[ 3.805375] [TTM] Zone kernel: Used memory at exit: 0 KiB
[ 3.805398] [drm] radeon: ttm finalized
[ 3.805401] [drm] Forcing AGP to PCI mode
[ 3.805467] radeon 0000:f0:10.0: Invalid PCI ROM header signature:
expecting 0xaa55, got 0xffff
[ 3.829341] gem 0001:04:0f.0 enP1p4s15f0: renamed from eth0
[ 3.882322] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 3.882327] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.882330] usb usb4: Product: OHCI PCI host controller
[ 3.882332] usb usb4: Manufacturer: Linux 5.4.0-2-powerpc64 ohci_hcd
[ 3.882335] usb usb4: SerialNumber: 0001:02:0b.0
[ 3.883389] hub 4-0:1.0: USB hub found
[ 3.883431] hub 4-0:1.0: 3 ports detected
[ 3.885248] ohci-pci 0001:02:0b.1: OHCI PCI host controller
[ 3.885265] ohci-pci 0001:02:0b.1: new USB bus registered, assigned
bus number 5
[ 3.885390] ohci-pci 0001:02:0b.1: irq 63, io mem 0x80101000
[ 3.895631] [drm] Not an x86 BIOS ROM, not using.
[ 3.895650] [drm] Using device-tree clock info
[ 3.895654] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.895665] radeon 0000:f0:10.0: VRAM: 256M 0x00000000A0000000 -
0x00000000AFFFFFFF (64M used)
[ 3.895669] radeon 0000:f0:10.0: GTT: 512M 0x0000000080000000 -
0x000000009FFFFFFF
[ 3.895674] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.895675] [drm] RAM width 128bits DDR
[ 3.895896] [TTM] Zone kernel: Available graphics memory: 2034272 KiB
[ 3.895899] [TTM] Initializing pool allocator
[ 3.895913] [TTM] Initializing DMA pool allocator
[ 3.895984] [drm] radeon: 64M of VRAM memory ready
[ 3.895987] [drm] radeon: 512M of GTT memory ready.
[ 3.896047] [drm] GART: num cpu pages 8192, num gpu pages 131072
[ 3.898074] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 3.898083] [drm] PCI GART of 512M enabled (table at 0x0000000060180000).
[ 3.898186] radeon 0000:f0:10.0: WB enabled
[ 3.898193] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr
0x0000000080000000 and cpu addr 0x(____ptrval____)
[ 3.898198] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.898200] [drm] Driver supports precise vblank timestamp query.
[ 3.898238] [drm] radeon: irq initialized.
[ 3.898241] [drm] Loading R300 Microcode
[ 3.898321] radeon 0000:f0:10.0: firmware: failed to load
radeon/R300_cp.bin (-2)
[ 3.898337] radeon 0000:f0:10.0: Direct firmware load for
radeon/R300_cp.bin failed with error -2
[ 3.898530] [drm:.r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.898538] radeon 0000:f0:10.0: failed initializing CP (-2).
[ 3.898544] radeon 0000:f0:10.0: Disabling GPU acceleration
[ 3.898553] [drm] radeon: cp finalized
[ 3.899330] [drm] Connector Table: 12 (mac g5 9600)
[ 3.899384] [drm] No valid Ext TMDS info found in BIOS
[ 3.899389] [drm] No TV DAC info found in BIOS
[ 3.899572] [drm] No TMDS info found in BIOS
[ 3.899708] [drm] Radeon Display Connectors
[ 3.899710] [drm] Connector 0:
[ 3.899712] [drm] DVI-I-1
[ 3.899713] [drm] HPD1
[ 3.899715] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.899716] [drm] Encoders:
[ 3.899723] [drm] DFP2: INTERNAL_DVO1
[ 3.899724] [drm] CRT2: INTERNAL_DAC2
[ 3.899726] [drm] Connector 1:
[ 3.899727] [drm] DVI-I-2
[ 3.899727] [drm] HPD2
[ 3.899729] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.899730] [drm] Encoders:
[ 3.899731] [drm] DFP1: INTERNAL_TMDS1
[ 3.899733] [drm] CRT1: INTERNAL_DAC1
[ 3.899734] [drm] Connector 2:
[ 3.899735] [drm] SVIDEO-1
[ 3.899736] [drm] Encoders:
[ 3.899737] [drm] TV1: INTERNAL_DAC2
[ 3.940506] [drm] fb mappable at 0xA0040000
[ 3.940509] [drm] vram apper at 0xA0000000
[ 3.940511] [drm] size 3145728
[ 3.940512] [drm] fb depth is 24
[ 3.940513] [drm] pitch is 4096
[ 3.964621] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 3.964625] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.964628] usb usb5: Product: OHCI PCI host controller
[ 3.964630] usb usb5: Manufacturer: Linux 5.4.0-2-powerpc64 ohci_hcd
[ 3.964632] usb usb5: SerialNumber: 0001:02:0b.1
[ 3.965647] hub 5-0:1.0: USB hub found
[ 3.965687] hub 5-0:1.0: 2 ports detected
[ 3.986780] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.989895] ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 3.989899] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.990906] Console: switching to colour frame buffer device 128x48
[ 3.995021] ata2.00: configured for UDMA/133
[ 3.995278] scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC38
PQ: 0 ANSI: 5
[ 4.006047] radeon 0000:f0:10.0: fb0: radeondrmfb frame buffer device
[ 4.020588] [drm] Initialized radeon 2.50.0 20080528 for 0000:f0:10.0
on minor 0
[ 4.156799] firewire_core 0001:03:0e.0: created device fw0: GUID
000a95fffebb2536, S800
[ 4.310828] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.313479] ata3.00: HPA detected: current 312579695, native 312581808
[ 4.313484] ata3.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7
[ 4.313487] ata3.00: 312579695 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 4.316241] ata3.00: configured for UDMA/133
[ 4.316459] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ
0-07 PQ: 0 ANSI: 5
[ 4.620545] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 4.641875] ata4: SATA link down (SStatus 4 SControl 300)
[ 4.852601] usb 5-2: New USB device found, idVendor=05ac,
idProduct=1003, bcdDevice= 4.20
[ 4.852606] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.852608] usb 5-2: Product: Hub in Apple Extended USB Keyboard
[ 4.852611] usb 5-2: Manufacturer: Mitsumi Electric
[ 4.855761] hub 5-2:1.0: USB hub found
[ 4.858614] hub 5-2:1.0: 3 ports detected
[ 4.965923] ata5: SATA link down (SStatus 4 SControl 300)
[ 4.978700] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 4.978730] sd 1:0:0:0: [sda] Write Protect is off
[ 4.978734] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.978776] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.979129] sd 2:0:0:0: [sdb] 312579695 512-byte logical blocks: (160
GB/149 GiB)
[ 4.979155] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.979158] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.979197] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.011858] sdb: [mac] sdb1 sdb2
[ 5.012976] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.015202] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 5.016424] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.186186] usb 5-2.1: new low-speed USB device number 3 using ohci-pci
[ 5.320744] usb 5-2.1: New USB device found, idVendor=05ac,
idProduct=0304, bcdDevice= 1.10
[ 5.320749] usb 5-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.320752] usb 5-2.1: Product: Apple Optical USB Mouse
[ 5.320755] usb 5-2.1: Manufacturer: Mitsumi Electric
[ 5.331521] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.340215] usbcore: registered new interface driver usbhid
[ 5.340219] usbhid: USB HID core driver
[ 5.346885] input: Mitsumi Electric Apple Optical USB Mouse as
/devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.1/5-2.1:1.0/0003:05AC:0304.0001/input/input1
[ 5.347372] apple 0003:05AC:0304.0001: input,hidraw0: USB HID v1.10
Mouse [Mitsumi Electric Apple Optical USB Mouse] on
usb-0001:02:0b.1-2.1/input0
[ 5.412639] usb 5-2.3: new full-speed USB device number 4 using ohci-pci
[ 5.475679] PM: Image not found (code -22)
[ 5.545615] usb 5-2.3: New USB device found, idVendor=05ac,
idProduct=020b, bcdDevice= 4.20
[ 5.545620] usb 5-2.3: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 5.545623] usb 5-2.3: Product: Apple Extended USB Keyboard
[ 5.545626] usb 5-2.3: Manufacturer: Mitsumi Electric
[ 5.557398] input: Mitsumi Electric Apple Extended USB Keyboard as
/devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.0/0003:05AC:020B.0002/input/input2
[ 5.617578] hid-generic 0003:05AC:020B.0002: input,hidraw1: USB HID
v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on
usb-0001:02:0b.1-2.3/input0
[ 5.625339] input: Mitsumi Electric Apple Extended USB Keyboard
System Control as
/devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.1/0003:05AC:020B.0003/input/input3
[ 5.684701] input: Mitsumi Electric Apple Extended USB Keyboard
Consumer Control as
/devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.1/0003:05AC:020B.0003/input/input4
[ 5.684994] hid-generic 0003:05AC:020B.0003: input,hidraw2: USB HID
v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on
usb-0001:02:0b.1-2.3/input1
[ 5.839370] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 6.157566] Not activating Mandatory Access Control as
/sbin/tomoyo-init does not exist.
[ 7.150246] systemd[1]: Inserted module 'autofs4'
[ 7.285336] systemd[1]: systemd 244-3 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN
+PCRE2 default-hierarchy=hybrid)
[ 7.285657] systemd[1]: Detected architecture ppc64.
[ 7.313325] systemd[1]: Set hostname to <debian-g5>.
[ 7.875592] random: crng init done
[ 8.437810] systemd[1]: /lib/systemd/system/dbus.socket:5:
ListenStream= references a path below legacy directory /var/run/,
updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket;
please update the unit file accordingly.
[ 8.736014] systemd[1]: Created slice system-getty.slice.
[ 8.737124] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.737920] systemd[1]: Created slice User and Session Slice.
[ 8.738192] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 8.738990] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 8.739204] systemd[1]: Reached target User and Group Name Lookups.
[ 8.739262] systemd[1]: Reached target Remote File Systems.
[ 8.739293] systemd[1]: Reached target Slices.
[ 8.739823] systemd[1]: Listening on Syslog Socket.
[ 8.740286] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.740591] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.741240] systemd[1]: Listening on Journal Audit Socket.
[ 8.741660] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.742122] systemd[1]: Listening on Journal Socket.
[ 8.742641] systemd[1]: Listening on udev Control Socket.
[ 8.742995] systemd[1]: Listening on udev Kernel Socket.
[ 8.747467] systemd[1]: Mounting Huge Pages File System...
[ 8.752293] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.757922] systemd[1]: Mounting Kernel Debug File System...
[ 8.793619] systemd[1]: Starting Set the console keyboard layout...
[ 8.798718] systemd[1]: Starting Create list of static device nodes
for the current kernel...
[ 8.857492] systemd[1]: Condition check resulted in Set Up Additional
Binary Formats being skipped.
[ 8.857630] systemd[1]: Condition check resulted in File System Check
on Root Device being skipped.
[ 8.862946] systemd[1]: Starting Journal Service...
[ 8.951156] systemd[1]: Starting Load Kernel Modules...
[ 8.955437] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.961577] systemd[1]: Starting udev Coldplug all Devices...
[ 8.976471] systemd[1]: Mounted Huge Pages File System.
[ 8.977343] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.978032] systemd[1]: Mounted Kernel Debug File System.
[ 8.979988] systemd[1]: Started Create list of static device nodes
for the current kernel.
[ 9.085137] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 9.089941] systemd[1]: Started Remount Root and Kernel File Systems.
[ 9.118576] systemd[1]: Condition check resulted in Rebuild Hardware
Database being skipped.
[ 9.123976] systemd[1]: Starting Load/Save Random Seed...
[ 9.130349] systemd[1]: Starting Create System Users...
[ 9.247028] systemd[1]: Started Load Kernel Modules.
[ 9.248207] systemd[1]: Condition check resulted in FUSE Control File
System being skipped.
[ 9.248454] systemd[1]: Condition check resulted in Kernel
Configuration File System being skipped.
[ 9.258825] systemd[1]: Starting Apply Kernel Variables...
[ 9.490315] systemd[1]: Started Load/Save Random Seed.
[ 9.516694] systemd[1]: Started Apply Kernel Variables.
[ 9.570752] synth uevent: /devices/vio: failed to send uevent
[ 9.570759] vio vio: uevent: failed to send synthetic uevent
[ 9.579459] systemd[1]: Started udev Coldplug all Devices.
[ 9.613462] systemd[1]: Starting Helper to synchronize boot up for
ifupdown...
[ 9.624203] systemd[1]: Started Set the console keyboard layout.
[ 9.661560] systemd[1]: Started Create System Users.
[ 9.666334] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.704841] systemd[1]: Started Helper to synchronize boot up for
ifupdown.
[ 9.856427] systemd[1]: Started Create Static Device Nodes in /dev.
[ 9.857228] systemd[1]: Reached target Local File Systems (Pre).
[ 9.862225] systemd[1]: Starting udev Kernel Device Manager...
[ 9.873633] ------------[ cut here ]------------
[ 9.873651] WARNING: CPU: 0 PID: 250 at arch/powerpc/mm/fault.c:395
.__do_page_fault+0x3b0/0xf10
[ 9.873652] Modules linked in: firewire_sbp2(E) ip_tables(E)
x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E)
crc32c_generic(E) hid_apple(E) hid_generic(E) usbhid(E) hid(E) sd_mod(E)
ata_generic(E) radeon(E) i2c_algo_bit(E) sata_svw(E) ttm(E) sr_mod(E)
cdrom(E) drm_kms_helper(E) sungem(E) sungem_phy(E) ohci_pci(E)
firewire_ohci(E) ohci_hcd(E) ehci_pci(E) ehci_hcd(E) firewire_core(E)
drm(E) crc_itu_t(E) usbcore(E) usb_common(E) drm_panel_orientation_quirks(E)
[ 9.873703] CPU: 0 PID: 250 Comm: (md-udevd) Tainted: G
E 5.4.0-2-powerpc64 #1 Debian 5.4.8-1
[ 9.873705] NIP: c00000000007fa90 LR: c00000000000b508 CTR:
c00000000017d054
[ 9.873708] REGS: c000000003f0b570 TRAP: 0700 Tainted: G
E (5.4.0-2-powerpc64 Debian 5.4.8-1)
[ 9.873709] MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 42484288
XER: 00000000
[ 9.873716] IRQMASK: 1
GPR00: c00000000000b508 c000000003f0b800
c000000001618500 c000000003f0b960
GPR04: 0000000000000000 0000000008000000
0000000000000008 0000000000000018
GPR08: 0000000000000000 0000000008000000
000000017ee20000 0000000000000008
GPR12: 0000000022484288 c000000001820000
0000000000000002 0000000000000004
GPR16: 0000000000000002 00000001588aa134
00007fffce1bae18 0000000000000001
GPR20: 0000000158986b80 ffffffffffffffff
0000000000000000 0000000000000000
GPR24: 0000000000000000 c0000000042a2400
0000000000000301 0000000000000000
GPR28: 0000000000000000 0000000000000000
0000000008000000 c000000003f0b960
[ 9.873742] NIP [c00000000007fa90] .__do_page_fault+0x3b0/0xf10
[ 9.873748] LR [c00000000000b508] handle_page_fault+0x10/0x30
[ 9.873750] Call Trace:
[ 9.873755] [c000000003f0b800] [c000000003f0b8f0] 0xc000000003f0b8f0
(unreliable)
[ 9.873760] [c000000003f0b8f0] [c00000000000b508]
handle_page_fault+0x10/0x30
[ 9.873771] --- interrupt: 301 at .__copy_tofrom_user_base+0x54/0x5ac
LR = ._copy_from_user+0xa8/0x140
[ 9.873773] [c000000003f0bbf0] [c000000003f0bca0] 0xc000000003f0bca0
(unreliable)
[ 9.873780] [c000000003f0bc80] [c00000000028d2ec] .do_seccomp+0x5bc/0xae0
[ 9.873786] [c000000003f0bd50] [c00000000017d060]
.__se_sys_prctl+0x520/0x8a0
[ 9.873790] [c000000003f0be20] [c00000000000c050] system_call+0x5c/0x68
[ 9.873792] Instruction dump:
[ 9.873794] 7d920120 7d910120 7d908120 eb81ffe0 eba1ffe8 ebc1fff0
ebe1fff8 4e800020
[ 9.873800] 2c3b0000 4082fe60 77c90800 4182fe58 <0fe00000> 4bfffe50
60000000 60000000
[ 9.873813] ---[ end trace 82cfbe8bced54fb6 ]---
[ 10.074996] systemd[1]: Started Journal Service.
[ 10.149284] systemd-journald[228]: Received client request to flush
runtime journal.
[ 11.036620] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 11.037610] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 11.037780] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 11.857143] snd-aoa-fabric-layout: Using PMF GPIOs
[ 11.996756] snd-aoa-fabric-layout: can use this codec
[ 12.080664] snd-aoa-codec-tas: tas found, addr 0x35 on
/ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
[ 12.132712] Adding 3982144k swap on /dev/sda4. Priority:-2 extents:1
across:3982144k FS
[ 13.970713] audit: type=1400 audit(1579193395.319:2):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-xpdfimport" pid=371 comm="apparmor_parser"
[ 13.971836] audit: type=1400 audit(1579193395.319:3):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-oopslash" pid=370 comm="apparmor_parser"
[ 14.023883] audit: type=1400 audit(1579193395.371:4):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-senddoc" pid=372 comm="apparmor_parser"
[ 14.058017] audit: type=1400 audit(1579193395.407:5):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/bin/man" pid=374 comm="apparmor_parser"
[ 14.058028] audit: type=1400 audit(1579193395.407:6):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_filter" pid=374 comm="apparmor_parser"
[ 14.058034] audit: type=1400 audit(1579193395.407:7):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_groff" pid=374 comm="apparmor_parser"
[ 14.059138] audit: type=1400 audit(1579193395.407:8):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/powerpc64-linux-gnu/lightdm/lightdm-guest-session"
pid=373 comm="apparmor_parser"
[ 14.059147] audit: type=1400 audit(1579193395.407:9):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/powerpc64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=373 comm="apparmor_parser"
[ 14.106613] audit: type=1400 audit(1579193395.455:10):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe" pid=376 comm="apparmor_parser"
[ 14.106623] audit: type=1400 audit(1579193395.455:11):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe//kmod" pid=376 comm="apparmor_parser"
[ 21.236971] sungem_phy: PHY ID: 2062e0, addr: 1
[ 21.237234] gem 0001:04:0f.0 enP1p4s15f0: Found BCM5421-K2 PHY
[ 24.892703] gem 0001:04:0f.0 enP1p4s15f0: Link is up at 1000 Mbps,
full-duplex
[ 24.892821] gem 0001:04:0f.0 enP1p4s15f0: Pause is enabled (rxfifo:
10240 off: 7168 on: 5632)
[ 24.892944] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p4s15f0: link becomes
ready
root@debian-g5:/home/bencz#
Alexandre S. Bencz
+55 {15} 991-707-384
On 16/01/2020 13:49, John Paul Adrian Glaubitz wrote:
On 1/16/20 5:47 PM, Alexandre Bencz wrote:
The AGP log:
root@debian-g5:/home/bencz# dmesg |grep -i agp
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 2.883626] Linux agpgart interface v0.103
[ 2.883666] agpgart-uninorth 0000:f0:0b.0: Apple U3 chipset
[ 2.891217] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
[ 2.891416] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
[ 3.624732] [drm] Forcing AGP to PCI mode
A complete dmesg would be more useful to see what the radeon kernel module
is saying etc.
Adrian
Reply to: