Hi Aidan,
Please use this 3.18.16 kernel. Link below:
https://drive.google.com/open?id=0B8pqd5Ots1vffmY5ZnpGUDg4UGNnVFk2M05tQUtEUUkwUmhmQWdLMWpfZGVraDIxSFltb1k
Please post a complete dmesg log. (Please dont grep anything, i mean a complete dmesg log).
Also please post the output of "cat /proc/interrupts".
I think a step has been missed where the msi interrupts are required to be disabled. this is required for PMAC's with PCIe (PMAC 11.2).
Perhaps MSI interrupts may or may not be required for AGP based GPU's.
I take it your machine is an AGP + PCIx Powermac G5?
Hopefully the two logs mentioned may shed some light on the issue and hopefully help sort out your problem.
I assume you already have a kernel running with a 4k pagesize?
Regards,
Peter
On 31/12/15 03:57, Aidan Sciortino wrote:
The card and monitor both worked fine under mac os x, and the color is fine in the terminal. I'm not sure what would indicate a gpu or monitor error, but they a were both working fine under os x.
Thanks for the suggestion though, I'll try a different cable.
Aidan
On Wed, Dec 30, 2015, 11:54 AM Brock Wittrock <brockwittrock@gmail.com> wrote:
Have you ruled out the possibility of a hardware issue either with your monitor, video card port(s), and video cable itself? Sometimes bent or missing pins on the video cables or loose connections can cause such problems. Just wanted to throw that out there.B-rock
On Wed, Dec 30, 2015 at 10:31 AM, Aidan Sciortino <2001flyingpigs14@gmail.com> wrote:
Thanks,
I have installed the kernel as suggested above, and when I run uname -a it returns that the kernel is running, but the graphical errors persist. Do I need to do something more? I'm a bit of a noob when it comes to graphics, so I may have just gotten it wrong.
Thanks for the help
Aidan Sciortino
On Tue, Dec 29, 2015, 11:09 PM Rick Thomas <rbthomas@pobox.com> wrote:
Hi Aidan,
Welcome to the Debian-on-G5-Macs club!
Peter Saisanas has a patched kernel that fixes this problem.
Check out this discussion in the mail archives:
https://lists.debian.org/debian-powerpc/2015/11/msg00006.html
To cut to the chase,
1) download the two ".deb" files at this URL:
https://drive.google.com/folderview?id=0B8pqd5Ots1vfaDdaOGJndzU2SlE&usp=sharing&tid=0B8pqd5Ots1vfT2puX09CYjEwcFk
do the following steps as root
2) do a "dpkg -i" on each of these ".deb" files.
3) do "update-initramfs -u"
4) Modify your "/etc/yaboot.conf" file to add a stanza pointing to the
new kernel and initrd files in /boot
5) run "ybin"
6) reboot and select the new yaboot option you created in step 4
You should be good to go
I've CC-ed Peter in case he sees anything I've missed here...
Rick
On 12/29/2015 3:27 PM, Aidan Sciortino wrote:
> Hello,
>
> I've successfully gotten Debian 8 stable up and running on my powermac
> g5, but am struggling to get a gui configured. The computer has an
> Nvidia fx 5200 graphics card, and I'm using the nouveau driver. The
> colors are extremely messed up, and I'm thinking it's a problem with
> nouveau. Has anyone else had this problem before? Does anyone know of
> a solution?
>
> Thanks
>
> Aidan
> --
> Aidan Sciortino
> Inventor
> Engineer
> Dreamer
--
Aidan SciortinoInventorEngineerDreamer
--
Aidan SciortinoInventorEngineerDreamer
[ 0.000000] Allocated 8192 bytes for 4 pacas at c00000000fffe000 [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12 [ 0.000000] Found initrd at 0xc000000001500000:0xc000000001c43000 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x32 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] Freed 4096 bytes for unused pacas [ 0.000000] Starting Linux PPC64 #1 SMP PREEMPT Thu Oct 8 20:17:59 AEDT 2015 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x120000000 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0x1fffffef18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c000001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0xc000000198000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.16-powerpc64 (root@pmac-g5-quad) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #1 SMP PREEMPT Thu Oct 8 20:17:59 AEDT 2015 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000000a0000000..0x00000000afffffff -> 0x00000000a0000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] WARNING ! Your machine is PMU-based but your kernel [ 0.000000] wasn't compiled with CONFIG_ADB_PMU option ! [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=832, gen1=833 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x1a0000000, Total RAM: 0x120000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x19fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x7fffffff] [ 0.000000] node 0: [mem 0x100000000-0x19fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff] [ 0.000000] On node 0 totalpages: 1179648 [ 0.000000] free_area_init_node: node 0, pgdat c00000000071df00, node_mem_map c000000001d51000 [ 0.000000] DMA zone: 23296 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1179648 pages, LIFO batch:31 [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xffffffff] [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU: Embedded 17 pages/cpu @c000000007900000 s32256 r0 d37376 u1048576 [ 0.000000] pcpu-alloc: s32256 r0 d37376 u1048576 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1156352 [ 0.000000] Kernel command line: root=UUID=e4fb553c-d94a-415a-a734-152e5b7d397a ro nouveau.modeset=0 video=TV-1:d video=DVI-I-1:d video=DVI-I-2:1920x1080:-24:D [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 4449148K/4718592K available (5476K kernel code, 988K rwdata, 1236K rodata, 316K init, 493K bss, 269444K reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 1 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56 [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 1800.000000 MHz [ 0.000004] clocksource: timebase mult[1e000005] shift[24] registered [ 0.000010] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000082] Console: colour dummy device 80x25 [ 0.000090] console [tty0] enabled [ 0.000097] bootconsole [udbg0] disabled [ 0.000108] pid_max: default: 32768 minimum: 301 [ 0.000158] Security Framework initialized [ 0.000173] AppArmor: AppArmor disabled by boot time parameter [ 0.000197] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000207] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000862] Initializing cgroup subsys devices [ 0.000883] Initializing cgroup subsys freezer [ 0.000894] Initializing cgroup subsys net_cls [ 0.000904] Initializing cgroup subsys blkio [ 0.000913] Initializing cgroup subsys perf_event [ 0.001181] PowerMac SMP probe found 1 cpus [ 0.001213] PPC970/FX/MP performance monitor hardware support registered [ 0.004090] Brought up 1 CPUs [ 0.004623] devtmpfs: initialized [ 0.005381] regulator-dummy: no parameters [ 0.009182] NET: Registered protocol family 16 [ 0.015181] cpuidle: using governor ladder [ 0.021196] cpuidle: using governor menu [ 0.021364] KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000 [ 0.021373] channel 0 bus <multibus> [ 0.021386] channel 1 bus <multibus> [ 0.021474] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 [ 0.021487] channel 0 bus <multibus> [ 0.021874] PCI: Probing PCI hardware [ 0.022009] PCI host bridge to bus 0000:f0 [ 0.022022] pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.022034] pci_bus 0000:f0: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.022043] pci_bus 0000:f0: root bus resource [mem 0xa0000000-0xafffffff] [ 0.022055] pci_bus 0000:f0: root bus resource [bus f0-ff] [ 0.022066] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to ff [ 0.022100] pci 0000:f0:0b.0: [106b:004b] type 00 class 0x060000 [ 0.022295] pci 0000:f0:10.0: [10de:0321] type 00 class 0x030000 [ 0.022319] pci 0000:f0:10.0: reg 0x10: [mem 0xa1000000-0xa1ffffff] [ 0.022332] pci 0000:f0:10.0: reg 0x14: [mem 0xa8000000-0xafffffff pref] [ 0.022373] pci 0000:f0:10.0: reg 0x30: [mem 0xa0000000-0xa001ffff pref] [ 0.061074] IOMMU table initialized, virtual merging enabled [ 0.061135] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to f0 [ 0.061248] PCI host bridge to bus 0001:00 [ 0.061259] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.061270] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.061280] pci_bus 0001:00: root bus resource [mem 0x80000000-0x9fffffff] [ 0.061289] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff] [ 0.061300] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.061311] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.061336] pci 0001:00:00.0: [106b:004a] type 00 class 0x060000 [ 0.061464] pci 0001:00:01.0: [1022:7450] type 01 class 0x060400 [ 0.061613] pci 0001:00:02.0: [1022:7450] type 01 class 0x060400 [ 0.061749] pci 0001:00:03.0: [106b:0045] type 01 class 0x060400 [ 0.061908] pci 0001:00:04.0: [106b:0046] type 01 class 0x060400 [ 0.062048] pci 0001:00:05.0: [106b:0047] type 01 class 0x060400 [ 0.062186] pci 0001:00:06.0: [106b:0048] type 01 class 0x060400 [ 0.062329] pci 0001:00:07.0: [106b:0049] type 01 class 0x060400 [ 0.062590] pci 0001:06:03.0: [1095:3124] type 00 class 0x018000 [ 0.062614] pci 0001:06:03.0: reg 0x10: [mem 0x90000000-0x9000007f 64bit] [ 0.062626] pci 0001:06:03.0: reg 0x18: [mem 0x90008000-0x9000ffff 64bit] [ 0.062635] pci 0001:06:03.0: reg 0x20: [io 0x811000-0x81100f] [ 0.062648] pci 0001:06:03.0: reg 0x30: [mem 0x90080000-0x900fffff pref] [ 0.062691] pci 0001:06:03.0: supports D1 D2 [ 0.062780] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.062795] pci 0001:00:01.0: bridge window [io 0x811000-0x811fff] [ 0.062801] pci 0001:00:01.0: bridge window [mem 0x90000000-0x900fffff] [ 0.062916] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.063020] pci 0001:01:07.0: [106b:0041] type 00 class 0xff0000 [ 0.063035] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.063165] pci 0001:01:08.0: [106b:0040] type 00 class 0x0c0310 [ 0.063180] pci 0001:01:08.0: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.063303] pci 0001:01:09.0: [106b:0040] type 00 class 0x0c0310 [ 0.063318] pci 0001:01:09.0: reg 0x10: [mem 0x80080000-0x80080fff] [ 0.063452] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.063471] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.063478] pci 0001:00:03.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.063613] pci 0001:02:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.063634] pci 0001:02:0b.0: reg 0x10: [mem 0x80102000-0x80102fff] [ 0.063704] pci 0001:02:0b.0: supports D1 D2 [ 0.063709] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.063817] pci 0001:02:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.063837] pci 0001:02:0b.1: reg 0x10: [mem 0x80101000-0x80101fff] [ 0.063907] pci 0001:02:0b.1: supports D1 D2 [ 0.063911] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.064015] pci 0001:02:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.064035] pci 0001:02:0b.2: reg 0x10: [mem 0x80100000-0x801000ff] [ 0.064105] pci 0001:02:0b.2: supports D1 D2 [ 0.064110] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.064211] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.064229] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.064236] pci 0001:00:04.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.064362] pci 0001:03:0d.0: [106b:0043] type 00 class 0xff0000 [ 0.064376] pci 0001:03:0d.0: reg 0x10: [mem 0x80204000-0x80207fff] [ 0.064512] pci 0001:03:0e.0: [106b:0042] type 00 class 0x0c0010 [ 0.064531] pci 0001:03:0e.0: reg 0x10: [mem 0x80200000-0x80200fff] [ 0.064597] pci 0001:03:0e.0: supports D1 D2 [ 0.064602] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.064699] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.064718] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.064725] pci 0001:00:05.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.064844] pci 0001:04:0f.0: [106b:004c] type 00 class 0x020000 [ 0.064860] pci 0001:04:0f.0: reg 0x10: [mem 0x80400000-0x805fffff] [ 0.064903] pci 0001:04:0f.0: reg 0x30: [mem 0x80300000-0x803fffff pref] [ 0.064989] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.065007] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.065015] pci 0001:00:06.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.065113] pci 0001:05:0c.0: [1166:0240] type 00 class 0x01018f [ 0.065128] pci 0001:05:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.065139] pci 0001:05:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.065149] pci 0001:05:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.065160] pci 0001:05:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.065171] pci 0001:05:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.065181] pci 0001:05:0c.0: reg 0x24: [mem 0x80600000-0x80601fff] [ 0.065285] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.065303] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.065310] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.065359] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 07 [ 0.065512] PCI 0001:00 Cannot reserve Legacy IO [io 0x811000-0x811fff] [ 0.065522] pci_bus 0000:f0: resource 4 [io 0x10000-0x80ffff] [ 0.065527] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.065532] pci_bus 0000:f0: resource 6 [mem 0xa0000000-0xafffffff] [ 0.065585] pci 0001:06:03.0: BAR 4: assigned [io 0x811000-0x81100f] [ 0.065598] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.065608] pci 0001:00:01.0: bridge window [io 0x811000-0x811fff] [ 0.065618] pci 0001:00:01.0: bridge window [mem 0x90000000-0x900fffff] [ 0.065630] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.065642] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.065652] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.065664] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.065673] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.065685] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.065695] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.065706] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.065715] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.065727] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.065736] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.065748] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.065753] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.065758] pci_bus 0001:00: resource 6 [mem 0x80000000-0x9fffffff] [ 0.065762] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff] [ 0.065767] pci_bus 0001:06: resource 0 [io 0x811000-0x811fff] [ 0.065772] pci_bus 0001:06: resource 1 [mem 0x90000000-0x900fffff] [ 0.065777] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.065782] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff] [ 0.065786] pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff] [ 0.065791] pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff] [ 0.065796] pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff] [ 0.065799] PCI: Probing PCI hardware done [ 0.072687] vgaarb: device added: PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none [ 0.072736] vgaarb: loaded [ 0.072742] vgaarb: bridge control possible 0000:f0:10.0 [ 0.072925] SCSI subsystem initialized [ 0.072971] pps_core: LinuxPPS API ver. 1 registered [ 0.072978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.073487] Switched to clocksource timebase [ 0.076920] NET: Registered protocol family 2 [ 0.077352] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.077853] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.078680] TCP: Hash tables configured (established 65536 bind 65536) [ 0.078780] TCP: reno registered [ 0.078798] UDP hash table entries: 4096 (order: 6, 262144 bytes) [ 0.079246] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes) [ 0.079942] NET: Registered protocol family 1 [ 0.080027] pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.080039] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.080053] pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled [ 0.080062] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.080076] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.080113] pci 0001:01:08.0: enabling device (0000 -> 0002) [ 0.130529] pci 0001:01:09.0: enabling device (0000 -> 0002) [ 0.181506] pci 0001:02:0b.0: enabling device (0000 -> 0002) [ 0.232498] pci 0001:02:0b.1: enabling device (0000 -> 0002) [ 0.283498] pci 0001:02:0b.2: enabling device (0004 -> 0006) [ 0.283675] Unpacking initramfs... [ 0.563267] Freeing initrd memory: 7436K (c000000001500000 - c000000001c43000) [ 0.564084] futex hash table entries: 256 (order: 3, 32768 bytes) [ 0.564131] Initialise system trusted keyring [ 0.564180] audit: initializing netlink subsys (disabled) [ 0.564228] audit: type=2000 audit(0.561:1): initialized [ 0.564860] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 0.569964] VFS: Disk quotas dquot_6.5.2 [ 0.570076] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.570288] msgmni has been set to 8704 [ 0.571106] alg: No test for stdrng (krng) [ 0.571176] bounce: pool size: 64 pages [ 0.571308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.571321] io scheduler noop registered [ 0.571330] io scheduler deadline registered [ 0.571355] io scheduler cfq registered (default) [ 0.571800] Using unsupported 1920x1080 NVDA,Display-B at a8004000, depth=8, pitch=2048 [ 0.612115] Console: switching to colour frame buffer device 240x67 [ 0.651850] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@10/NVDA,Display-B@1 [ 0.652498] MacIO PCI driver attached to K2 chipset [ 0.653721] mousedev: PS/2 mouse device common for all mice [ 0.654029] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 0.654309] PowerMac i2c bus mac-io 0 registered [ 0.654453] i2c i2c-0: i2c-powermac: register /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a [ 0.654535] i2c i2c-0: No i2c address for /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/i2c-modem [ 0.654952] i2c i2c-0: I2C transfer at 0x46 failed, size 2, err -6 [ 0.655104] i2c i2c-0: I2C transfer at 0x47 failed, size 2, err -6 [ 0.655157] PowerMac i2c bus u3 1 registered [ 0.655298] i2c i2c-1: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/fan@15e [ 0.655341] i2c i2c-1: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/cereal@1c0 [ 0.655347] i2c i2c-1: i2c-powermac: modalias failure on /u3@0,f8000000/i2c@f8001000/cereal@1c0 [ 0.655656] PowerMac i2c bus u3 0 registered [ 0.655786] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/i2c-hwclock@ca [ 0.655821] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/temp-monitor@94 [ 0.655857] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/temp-monitor@98 [ 0.655891] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/temp-monitor@9c [ 0.655925] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/i2c-hwclock@d2 [ 0.655962] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/i2c-cpu-voltage@30 [ 0.655997] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/supply-monitor@58 [ 0.656035] i2c i2c-2: i2c-powermac: register /u3@0,f8000000/i2c@f8001000/cpuid@a0 [ 0.689310] Registering G5 CPU frequency driver [ 0.689453] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc [ 0.689642] Low: 1310 Mhz, High: 1800 Mhz, Cur: 1800 MHz [ 0.690019] TCP: cubic registered [ 0.690428] NET: Registered protocol family 10 [ 0.691144] mip6: Mobile IPv6 [ 0.691253] NET: Registered protocol family 17 [ 0.691417] Key type dns_resolver registered [ 0.691637] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff] [ 0.692126] Loading compiled-in X.509 certificates [ 0.692293] registered taskstats version 1 [ 0.692994] rtc-generic rtc-generic: hctosys: unable to read the hardware clock [ 0.693681] Freeing unused kernel memory: 316K (c000000000695000 - c0000000006e4000) [ 0.746283] systemd-udevd[54]: starting version 215 [ 0.747875] random: systemd-udevd urandom read with 1 bits of entropy available [ 0.844936] usbcore: registered new interface driver usbfs [ 0.845157] usbcore: registered new interface driver hub [ 0.847619] usbcore: registered new device driver usb [ 0.854998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.857049] ehci-pci: EHCI PCI platform driver [ 0.857359] ehci-pci 0001:02:0b.2: EHCI Host Controller [ 0.858464] ehci-pci 0001:02:0b.2: new USB bus registered, assigned bus number 1 [ 0.858850] ehci-pci 0001:02:0b.2: irq 63, io mem 0x80100000 [ 0.859878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.864553] ehci-pci 0001:02:0b.2: USB 2.0 started, EHCI 1.00 [ 0.864937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.865141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.865354] usb usb1: Product: EHCI Host Controller [ 0.868512] usb usb1: Manufacturer: Linux 3.18.16-powerpc64 ehci_hcd [ 0.868720] usb usb1: SerialNumber: 0001:02:0b.2 [ 0.870879] hub 1-0:1.0: USB hub found [ 0.871596] libata version 3.00 loaded. [ 0.873352] hub 1-0:1.0: 5 ports detected [ 0.882140] pata-pci-macio 0001:03:0d.0: enabling device (0014 -> 0016) [ 0.897778] sata_svw 0001:05:0c.0: version 2.3 [ 0.907805] scsi host0: sata_svw [ 0.929922] ohci-pci: OHCI PCI platform driver [ 0.951579] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3 [ 0.967995] scsi host1: sata_svw [ 0.980355] ohci-pci 0001:01:08.0: OHCI PCI host controller [ 1.004551] scsi host2: pata_macio [ 1.024142] scsi host3: sata_svw [ 1.036950] ohci-pci 0001:01:08.0: new USB bus registered, assigned bus number 2 [ 1.056833] ata5: PATA max UDMA/100 irq 39 [ 1.079699] scsi host4: sata_svw [ 1.090167] ohci-pci 0001:01:08.0: irq 27, io mem 0x80081000 [ 1.102866] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 1.113401] ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 16 [ 1.122757] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 16 [ 1.131813] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 16 [ 1.140902] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 16 [ 1.176605] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.194621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.203654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.212737] usb usb2: Product: OHCI PCI host controller [ 1.221827] usb usb2: Manufacturer: Linux 3.18.16-powerpc64 ohci_hcd [ 1.230907] usb usb2: SerialNumber: 0001:01:08.0 [ 1.240555] hub 2-0:1.0: USB hub found [ 1.249524] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.258605] hub 2-0:1.0: 2 ports detected [ 1.267863] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S222L, SB03, max UDMA/66 [ 1.277047] ohci-pci 0001:01:09.0: OHCI PCI host controller [ 1.286028] ohci-pci 0001:01:09.0: new USB bus registered, assigned bus number 3 [ 1.295096] ohci-pci 0001:01:09.0: irq 28, io mem 0x80080000 [ 1.304170] ata5.00: configured for UDMA/66 [ 1.325278] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222L SB03 PQ: 0 ANSI: 5 [ 1.334119] ata5.00: K2/Shasta alignment limits applied [ 1.383438] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.392102] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.400738] usb usb3: Product: OHCI PCI host controller [ 1.409305] usb usb3: Manufacturer: Linux 3.18.16-powerpc64 ohci_hcd [ 1.417910] usb usb3: SerialNumber: 0001:01:09.0 [ 1.427117] hub 3-0:1.0: USB hub found [ 1.435791] hub 3-0:1.0: 2 ports detected [ 1.444630] ohci-pci 0001:02:0b.0: OHCI PCI host controller [ 1.453345] ohci-pci 0001:02:0b.0: new USB bus registered, assigned bus number 4 [ 1.462048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.470770] ohci-pci 0001:02:0b.0: irq 63, io mem 0x80102000 [ 1.480822] usb 1-3: New USB device found, idVendor=154b, idProduct=009f [ 1.489887] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.498518] ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3EA, max UDMA/133 [ 1.507087] usb 1-3: Product: USB 2.0 FD [ 1.515594] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.524158] usb 1-3: Manufacturer: PNY Technologies [ 1.540478] usb 1-3: SerialNumber: AF918H13YD35005026 [ 1.552582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.565108] ata1.00: configured for UDMA/133 [ 1.575511] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.585293] usb-storage 1-3:1.0: USB Mass Storage device detected [ 1.594172] usb usb4: Product: OHCI PCI host controller [ 1.603176] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 A3EA PQ: 0 ANSI: 5 [ 1.612219] usb usb4: Manufacturer: Linux 3.18.16-powerpc64 ohci_hcd [ 1.622329] usb usb4: SerialNumber: 0001:02:0b.0 [ 1.632006] hub 4-0:1.0: USB hub found [ 1.640872] scsi host5: usb-storage 1-3:1.0 [ 1.649687] hub 4-0:1.0: 3 ports detected [ 1.659350] usbcore: registered new interface driver usb-storage [ 1.668549] ohci-pci 0001:02:0b.1: OHCI PCI host controller [ 1.678676] ohci-pci 0001:02:0b.1: new USB bus registered, assigned bus number 5 [ 1.687824] firewire_core 0001:03:0e.0: created device fw0: GUID 000a95fffe8d9a26, S800 [ 1.698011] ohci-pci 0001:02:0b.1: irq 63, io mem 0x80101000 [ 1.777396] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.786453] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.795566] usb usb5: Product: OHCI PCI host controller [ 1.804555] usb usb5: Manufacturer: Linux 3.18.16-powerpc64 ohci_hcd [ 1.813490] usb usb5: SerialNumber: 0001:02:0b.1 [ 1.823153] hub 5-0:1.0: USB hub found [ 1.832135] hub 5-0:1.0: 2 ports detected [ 1.947641] ata2: SATA link down (SStatus 4 SControl 300) [ 2.204498] usb 5-2: new full-speed USB device number 2 using ohci-pci [ 2.283579] ata3: SATA link down (SStatus 4 SControl 300) [ 2.456543] usb 5-2: New USB device found, idVendor=05ac, idProduct=1001 [ 2.465554] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.474523] usb 5-2: Product: Hub in Apple USB Keyboard [ 2.483407] usb 5-2: Manufacturer: Alps Electric [ 2.496560] hub 5-2:1.0: USB hub found [ 2.507554] hub 5-2:1.0: 3 ports detected [ 2.623584] ata4: SATA link down (SStatus 4 SControl 300) [ 2.672529] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.681630] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.692026] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.692286] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.705213] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 2.714582] sd 0:0:0:0: [sda] Write Protect is off [ 2.723959] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 2.733079] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.733168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.754751] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 [ 2.766113] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.818636] usb 5-2.1: new low-speed USB device number 3 using ohci-pci [ 2.999561] usb 5-2.1: New USB device found, idVendor=05ac, idProduct=0201 [ 3.008837] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.018088] usb 5-2.1: Product: Apple USB Keyboard [ 3.027270] usb 5-2.1: Manufacturer: Alps Electric [ 3.044860] hidraw: raw HID events driver (C) Jiri Kosina [ 3.054291] scsi 5:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4 [ 3.069283] sd 5:0:0:0: [sdb] 62373888 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 3.079178] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.091160] usbcore: registered new interface driver usbhid [ 3.101418] sd 5:0:0:0: [sdb] Write Protect is off [ 3.111277] usbhid: USB HID core driver [ 3.120439] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.121422] sd 5:0:0:0: [sdb] No Caching mode page found [ 3.132737] input: Alps Electric Apple USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.1/5-2.1:1.0/0003:05AC:0201.0001/input/input0 [ 3.142602] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 3.152337] usb 5-2.2: new low-speed USB device number 4 using ohci-pci [ 3.162394] hid-generic 0003:05AC:0201.0001: input,hidraw0: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-0001:02:0b.1-2.1/input0 [ 3.177812] sdb: sdb1 [ 3.197775] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 3.274577] usb 5-2.2: New USB device found, idVendor=05ac, idProduct=0304 [ 3.284706] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.295255] usb 5-2.2: Product: Apple Optical USB Mouse [ 3.305425] usb 5-2.2: Manufacturer: Mitsumi Electric [ 3.329864] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.2/5-2.2:1.0/0003:05AC:0304.0002/input/input1 [ 3.342033] apple 0003:05AC:0304.0002: input,hidraw1: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0001:02:0b.1-2.2/input0 [ 3.508745] random: nonblocking pool is initialized [ 3.842834] PM: Starting manual resume from disk [ 4.102669] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 4.570221] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 4.581772] systemd[1]: Detected architecture 'ppc64'. [ 4.814460] systemd[1]: Inserted module 'autofs4' [ 4.844154] systemd[1]: Set hostname to <Coltrane>. [ 6.155796] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 6.168877] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 6.180780] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.192460] systemd[1]: Starting Remote File Systems (Pre). [ 6.215988] systemd[1]: Reached target Remote File Systems (Pre). [ 6.227613] systemd[1]: Starting Encrypted Volumes. [ 6.250974] systemd[1]: Reached target Encrypted Volumes. [ 6.262662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 6.287099] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.299149] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 6.311216] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.323162] systemd[1]: Expecting device dev-disk-by\x2duuid-70f72451\x2dbab1\x2d4090\x2db7cb\x2d00b511d2f4d3.device... [ 6.347880] systemd[1]: Expecting device dev-disk-by\x2duuid-4742c3d6\x2d5493\x2d46df\x2d9e16\x2d9798e04812b6.device... [ 6.373287] systemd[1]: Starting Root Slice. [ 6.398647] systemd[1]: Created slice Root Slice. [ 6.411114] systemd[1]: Starting User and Session Slice. [ 6.436463] systemd[1]: Created slice User and Session Slice. [ 6.448928] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 6.474519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.487131] systemd[1]: Starting Delayed Shutdown Socket. [ 6.512578] systemd[1]: Listening on Delayed Shutdown Socket. [ 6.525152] systemd[1]: Starting Journal Socket (/dev/log). [ 6.550755] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.563443] systemd[1]: Starting udev Control Socket. [ 6.588380] systemd[1]: Listening on udev Control Socket. [ 6.600555] systemd[1]: Starting udev Kernel Socket. [ 6.624588] systemd[1]: Listening on udev Kernel Socket. [ 6.636390] systemd[1]: Starting Journal Socket. [ 6.660195] systemd[1]: Listening on Journal Socket. [ 6.671959] systemd[1]: Starting System Slice. [ 6.695529] systemd[1]: Created slice System Slice. [ 6.706728] systemd[1]: Started File System Check on Root Device. [ 6.717711] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 6.739985] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.750896] systemd[1]: Starting system-getty.slice. [ 6.773003] systemd[1]: Created slice system-getty.slice. [ 6.783782] systemd[1]: Starting Increase datagram queue length... [ 6.814551] systemd[1]: Started Set Up Additional Binary Formats. [ 6.825464] systemd[1]: Mounting Huge Pages File System... [ 6.881680] systemd[1]: Starting Load Kernel Modules... [ 6.905915] systemd[1]: Starting udev Coldplug all Devices... [ 6.932277] systemd[1]: Mounting Debug File System... [ 6.963028] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.997519] systemd[1]: Mounting POSIX Message Queue File System... [ 7.024290] systemd[1]: Starting Slices. [ 7.053947] systemd[1]: Reached target Slices. [ 7.121001] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.135000] fuse init (API version 7.23) [ 7.192222] systemd[1]: Started Increase datagram queue length. [ 7.214237] systemd[1]: Mounted Huge Pages File System. [ 7.225061] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE [ 7.257706] systemd[1]: Failed to start Load Kernel Modules. [ 7.267989] systemd[1]: Unit systemd-modules-load.service entered failed state. [ 7.289141] systemd[1]: Mounted Debug File System. [ 7.309693] systemd[1]: Mounted POSIX Message Queue File System. [ 7.330601] systemd[1]: Started udev Coldplug all Devices. [ 7.393191] systemd[1]: Mounted Configuration File System. [ 7.403155] systemd[1]: Mounting FUSE Control File System... [ 7.424732] systemd[1]: Starting Apply Kernel Variables... [ 7.455713] systemd[1]: Starting Syslog Socket. [ 7.481297] systemd[1]: Listening on Syslog Socket. [ 7.491355] systemd[1]: Starting Journal Service... [ 7.529074] systemd[1]: Started Journal Service. [ 7.869609] systemd-udevd[169]: starting version 215 [ 8.859916] Linux agpgart interface v0.103 [ 8.896130] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) [ 9.029992] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 9.072823] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 9.135008] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.276091] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a [ 9.337386] [drm] Initialized drm 1.1.0 20060810 [ 10.146627] Unable to find swap-space signature [ 10.821295] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 11.010433] systemd-journald[166]: Received request to flush runtime journal from PID 1 [ 12.187190] RPC: Registered named UNIX socket transport module. [ 12.196742] RPC: Registered udp transport module. [ 12.206450] RPC: Registered tcp transport module. [ 12.215897] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.252558] FS-Cache: Loaded [ 12.298732] FS-Cache: Netfs 'nfs' registered for caching [ 12.347322] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 172.346545] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 172.377468] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
CPU0 16: 2584 MPIC 1 0 Level 0001:05:0c.0 26: 2 MPIC 1 26 Level keywest i2c 27: 1 MPIC 1 27 Level ohci_hcd:usb2 28: 1 MPIC 1 28 Level ohci_hcd:usb3 39: 323 MPIC 1 39 Level 0001:03:0d.0 40: 1 MPIC 1 40 Level firewire_ohci 42: 131 MPIC 2 42 Level keywest i2c 63: 3588 MPIC 1 63 Level ehci_hcd:usb1, ohci_hcd:usb4, ohci_hcd:usb5 LOC: 228412 Local timer interrupts for timer event device LOC: 4 Local timer interrupts for others SPU: 343 Spurious interrupts PMI: 0 Performance monitoring interrupts MCE: 0 Machine check exceptions HMI: 0 Hypervisor Maintenance Interrupts