Last that i had been installed was debian wheezy 7.6 install it without upgrading during installing ( dont install upgrade from network during the installation procedures) . Remember to make the Swap and the / partitions dont use ext 4 try with ext 2 fs because is more compatible with old pegasos2 openfirmware. remember to make a boot partition where you will copy the kernle and the intrd.img ... you can use that partion for boot loader of morphos and amigaos 4 plus for start osx . I cant help moore because i dont have a peggy2 any more :-( ... one of the best machine that i had in my life. Luigi
CC: intermediadc@hotmail.com; debian-powerpc@lists.debian.org From: apex@gmx.ch Subject: Re: Debian 8.0 PPC not working on Pegasos II G4 Date: Sat, 2 May 2015 01:09:22 +0200 To: herminio.hernandezjr@gmail.com Hello,
I and also the other guys in our forum already tried to install 7.8, which ends in the same problem like 8.0. Which version was running on your Peg-2?
I only remember that 6.x was running fine.
But it would be nice to find the problem, because the part with the installation works fine up to 95%. MfG, Robert Send from iPhone 5
Thanks for responding
Sent from my iPhone
Guys i had this machine with radeon radeon 9000 and / 9800pro
and was working good with debian wheezy 7.x .
i sold it in september 2014.
the machine is one of the best powerpc platform that i had ...phase
5 after bplan after genensis
was make great hardware.
i suggest the guys to install wheezy that was tested and working by
me in person.
Luigi
On 01/05/15 16:57, Herminio Hernandez,
Jr. wrote:
Do you have any advice for these guys?
---------- Forwarded message
----------
From: aPEX <aPEX@gmx.ch>
Date: Fri, May 1, 2015 at 9:36 AM
Subject: Re: Debian 8.0 PPC not working on Pegasos II G4
To: "Herminio Hernandez Jr." < herminio.hernandezjr@gmail.com>
Hello Herminio,
in our forum now 3 other guys with a PEG-II did a
test and came excatly to the same result / problem.
I am not a linux specialist, but the kernel part
which is starting the installation is working fine.
But because the installation fail and later also the
booting there must be a difference in the
kernel which is installed later.
The Pegasos is based on the CHRP plattform:
Thank you if you can help in any kind.
Best regards, Robert
Oh that is not good. Let me reach out to a
friend.
Sent from my iPhone
Hello,
I tried this but it ends in this, see
picture.
<IMG_0051.JPG>
Am 30.04.2015 um 20:57
schrieb Herminio Hernandez Jr. <herminio.hernandezjr@gmail.com>:
If you are yaboot try this
Linux radeon.modeset=1 video=offb:off
video=radeonfb:off
If that does not help then add this as well
radeon.agpmode=-1
Sent from my iPhone
On Apr 30, 2015, at
1:46 PM, aPEX <aPEX@gmx.ch>
wrote:
Hello,
it is a RADEON 9000 Pro with 128MB Memory.
Best regards, aPEX
Am 30.04.2015 um
19:38 schrieb Herminio Hernandez Jr.
<herminio.hernandezjr@gmail.com>:
What is the video card you are using?
Sent from my iPhone
On Apr 30, 2015,
at 12:07 PM, aPEX <aPEX@gmx.ch>
wrote:
Hello,
no one who can help? Debian 6.8 was
still running fine…
I think if I will try Debian 8 I will
have same problem like with 7.8?
Best regards, aPEX
Am 27.04.2015
um 20:27 schrieb aPEX <aPEX@gmx.ch>:
Hello all,
I was using a long time Debian 6.x
on my Pegasos II G4 with 1Ghz CPU
und 2GB Memory.
Last week I got the stupid idea to
install everything new using latest
Debian 7.8, because
on the DVD there is still the
install script for the Pegasos. :-)
Installation itself is working fine
till 95% and then abort there, some
like after-installation trigger.
We tested it on several Pegasos II
that we have, always the same. I can
go on without installing
more software, but I assume that
also some basic stuff is missing.
Also the 3.x kernel is no more
working on the Pegasos II, you will
get screen with grafic trash
right after starting the kernel.
<IMG_9965.JPG>
Any idea? I tried it in the IRC, but
got no answer.
It would be really fantastic if this
problem could be fixed and the
Pegasos II will work again.
Best regards, Robert aka aPEX
PS: I am just a user, no Linux guru,
sorry for this…
--
To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
with a subject of "unsubscribe".
Trouble? Contact listmaster@lists.debian.org
Archive: https://lists.debian.org/A1381917-B685-409D-8700-E25F3186F7B2@gmx.ch
--
To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
with a subject of "unsubscribe".
Trouble? Contact listmaster@lists.debian.org
Archive: https://lists.debian.org/806DD26D-3F78-411C-9A64-22D775EB5797@gmail.com
|