more Pegasos: no keyboard until udevd loads serio
Hi,
While making a recovery boot I noticed today, that before udevd started,
my PS/2 keyboard and AUX mouse is not seen by the kernel.
Which means, the serio module is not in the default kernel configuration,
this is pretty much also visible from dmesg:
[ 10.235053] udevd[289]: starting version 175
[ 12.717567] udevd[341]: renamed network interface eth0 to eth4
[ 12.740713] vt596_smbus 0000:00:0c.4: SMBUS: Error: Host SMBus
controller not enabled! - upgrade BIOS or use force=1
[ 13.154719] vt8231 0000:00:0c.4: enabling sensors
[ 13.437245] NET: Registered protocol family 23
[ 13.543645] via-ircc: dongle probing not supported, please specify
dongle_id module parameter.
[ 13.559288] IrDA: Registered device irda0 (via-ircc)
[ 13.958921] parport_pc: VIA 686A/8231 detected
[ 13.958936] parport_pc: probing current configuration
[ 13.958982] parport_pc: Current parallel port base: 0x3BC
[ 13.959042] parport0: PC-style at 0x3bc, irq 7 [PCSPP]
[ 14.064019] parport_pc: VIA parallel port: io=0x3BC, irq=7
[ 14.642045] snd_via82xx_modem 0000:00:0c.6: enabling device (0000 ->
0001)
[ 15.908109] snd_via82xx_modem: probe of 0000:00:0c.6 failed with error
-13
[ 15.918850] snd_via82xx 0000:00:0c.5: enabling device (0000 -> 0001)
[ 19.152267] Adding 999932k swap on /dev/sda2. Priority:-1 extents:1
across:999932k
[ 21.587611] EXT3-fs (md1): using internal journal
[ 21.844368] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.861864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.086265] loop: module loaded
[ 22.401102] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 23.925522] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input2
Because of this issue I had to plug in an USB keyboard to be able to work
with the recovery console.
Is it just my system, or someone can confirm the problem? Is there an easy
workaround for this? (Thinking about some modification in some mkvmlinuz
configuration.)
Thanks,
--
Karoly Balogh
Reply to: