Thanks everybody for you quick replies. I think I understand the problem better now. I followed the guids and instructions on how to update yaboot from within the installation process. It has worked in so far as that yaboot now gives a version of 1.3.16 when booting the lpar. It now also seems to find and read the kernel image. However, as soon as Linux starts booting the console gets filled with error messages like the ones below (two messages each from different boots). I have never seen this kind of error with Linux before can't make heads or tail whether it is related to yaboot, the kernel the hardware or whatnot. Any ideas? As always, booting rescue64 from the Debian install disk and chroot in the system is all fine, no problems. This is the most confusing aspect. Thanks for all the advise and help. It would benefit my project a lot if I could put this Linux server on an lpar instead a seperate machine. Best regards, Benedikt ***** error messages: ** Detected bad memory access to address: ffffffffff0f8b98 Package path = /aliases Return Stack Trace ------------------ @ - c3e530 find-method - c48b9c (poplocals) - c3c9e8 $call-method - c48c54 (poplocals) - c3c9e8 key-fillq - c491dc ?xoff - c492e8 (poplocals) - c3c9e8 (stdout-write) - c49914 (emit) - c49a14 space - c47970 quit - c4cc98 quit - c4cb40 _syscatch - c50720 _syscatch - c50720 invalid pointer - 388600017d484378 invalid pointer - 5508043eb10316b8 invalid pointer - 7d0c29ae81230008 invalid pointer - a14316b8554ac23e invalid pointer - 7d4931ae90830014 Detected bad memory access to address: ffffffffff0f8b98 Package path = /packages/boot-mgr Return Stack Trace ------------------ @ - c3e530 find-method - c48b9c (poplocals) - c3c9e8 $call-method - c48c54 (poplocals) - c3c9e8 key-fillq - c491dc ?xoff - c492e8 (poplocals) - c3c9e8 (stdout-write) - c49914 (emit) - c49a14 space - c47970 quit - c4cc98 quit - c4cb40 _syscatch - c50720 _syscatch - c50720 invalid pointer - 388600017d484378 invalid pointer - 5508043eb10316b8 invalid pointer - 7d0c29ae81230008 invalid pointer - a14316b8554ac23e invalid pointer - 7d4931ae90830014 ***** Am Mittwoch, den 07.09.2011, 16:27 +0300 schrieb Gasha: > short: > install yaboot 1.3.16 (from latest/unstable) > > long: > see e-mail from 24.08.2011 in list archives > subject: > Debian 6.0.2 on Power7 LPAR - it work - little howto > > Gasha > > On 09/07/2011 03:56 PM, Benedikt Wegmann wrote: > > Hello everybody! > > > > I'm in the process of installing Debian Stable on a Power 740 system. > > I'm familiar with the installation on x86 systems and the installation > > process of Debian ppc thus looked familiar. > > > > I installed using the "install64" option. Disk partition was "guided - > > use whole disk, with separate /home". Installation concluded > > successfully but after a reboot yaboot loads and offers the choice of > > "Linux" and "old" - as per standard configuration I learned - but > > booting "Linux" fails: > > > > Config file read, 4096 bytes > > > > Welcome to yaboot version 1.3.13 > > Enter "help" to get some basic usage information > > boot: > > Linux old > > boot: > > Please wait, loading kernel... > > Can't open device</vdevice/v-scsi@30000002/@1:0> > > /vdevice/v-scsi@30000002/@1:2,/boot/vmlinux: Unable to open file, Invalid device > > boot: > > > > The device however is valid - I can see it in the SMS menu - and I can > > successfully boot into the rescue system via the Debian cd ("rescue64") > > and subsequently chroot into my installed system, no problem. > > However, I can never boot straight into it with yaboot. > > > > Some information about the system: > > > > root@debian:/# cat /proc/partitions > > major minor #blocks name > > > > 8 0 6291456 sda > > 8 1 7168 sda1 > > 8 2 1902592 sda2 > > 8 3 1 sda3 > > 8 5 262144 sda5 > > 8 6 4115456 sda6 > > > > > > root@debian:/# cat /etc/yaboot.conf > > ## yaboot.conf generated by debian-installer > > ## > > ## run: "man yaboot.conf" for details. Do not make changes until you have!! > > ## see also: /usr/share/doc/yaboot/examples for example configurations. > > ## > > ## For a dual-boot menu, add one or more of: > > ## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ > > > > boot="/dev/disk/by-id/scsi-SAIX_VDASD_00f6c18700004c0000000130f6e6a926.4-part1" > > device=/vdevice/v-scsi@30000002/@1 > > partition=2 > > root="UUID=1017dfc6-257e-433f-9247-6676b732630a" > > timeout=50 > > install=/usr/lib/yaboot/yaboot > > enablecdboot > > > > image=/boot/vmlinux > > label=Linux > > read-only > > initrd=/boot/initrd.img > > > > image=/boot/vmlinux.old > > label=old > > read-only > > initrd=/boot/initrd.img.old > > root@debian:/# > > > > > > root@debian:/# mount > > /dev/sda2 on / type ext3 (rw,relatime,errors=remount-ro,data=ordered) > > /dev/sda6 on /home type ext3 (rw,relatime,errors=continue,data=ordered) > > tmpfs on /dev type tmpfs (rw,relatime,mode=755) > > proc on /proc type proc (rw,relatime) > > sysfs on /sys type sysfs (rw,relatime) > > devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) > > > > > > root@debian:/# ls -lR /boot/ > > /boot/: > > total 18364 > > -rw-r--r-- 1 root root 1214811 Jun 14 14:44 System.map-2.6.32-5-powerpc-smp > > -rw-r--r-- 1 root root 93218 Jun 14 14:44 config-2.6.32-5-powerpc-smp > > lrwxrwxrwx 1 root root 31 Sep 7 09:44 initrd.img -> initrd.img-2.6.32-5-powerpc-smp > > -rw-r--r-- 1 root root 10216212 Sep 7 09:44 initrd.img-2.6.32-5-powerpc-smp > > lrwxrwxrwx 1 root root 28 Sep 7 09:44 vmlinux -> vmlinux-2.6.32-5-powerpc-smp > > -rw-r--r-- 1 root root 7233739 Jun 14 14:44 vmlinux-2.6.32-5-powerpc-smp > > > > > > root@debian:/# uname -a > > Linux debian 2.6.32-5-powerpc64 #1 SMP Tue Jun 14 11:04:52 UTC 2011 ppc64 GNU/Linux > > > > > > I'm at a loss as to what the problem might be. The installation looks > > fine within the chroot environment, I just can't get it to boot. > > > > I also tried an install as per the wiki site > > (https://www.ibm.com/developerworks/mydeveloperworks/wikis/home?lang=en#/wiki/Debian%206%20on%20Power7%20LPAR/page/Start%20installation) with updating yaboot during the install as described but without lick. The only aspect where my install differs is with regard to the use of multipath. I use a plain old scsi disk and only have one VIOS in the machine. > > > > Any suggestions would be much appreciated. > > Thanks! > > > > > > > > -- Benedikt Wegmann benedikt.wegmann@gwdg.de +49 (0)551 201-1870 bwegman1@jabber.gwdg.de ......................... Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de <http://www.gwdg.de/> , E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510, Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Oswald Haan, Dr. Paul Suren Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen, Registergericht: Göttingen Handelsregister-Nr. B 598 ......................... Die digitale Unterschrift dieser Mail kann anhand des Zertifikats des DFN überprüft werden: https://ca.gwdg.de/certs/
Attachment:
smime.p7s
Description: S/MIME cryptographic signature