[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Sleep problems with kernels >= 2.6.21 on powerpc

Hello!
I don't have traces at hand and due to lack of time cannot reproduce it up to tomorrow. However this hint may speed up your analysis!
Sorry for the delay, but my desktop PC had an urgent hard disk problem I had to fix ASASP.
So here is the output from dmesg that suggested to me that firewire might be a problem: 


usb_endpoint usbdev2.2_ep81: PM: suspend 0->2, parent 2-1:1.0 already 2
usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
eth2: Airport entering sleep mode
eth0: suspending, WakeOnLan disabled
pci_set_power_state(): 0002:20:0e.0: state=3, current state=5
firewire_ohci: pci_set_power_state failed with -22<3>pci_device_suspend(): pci_suspend+0x0/0x9c [firewire_ohci]() returns -22
suspend_device(): pci_device_suspend+0x0/0x98() returns -22
Could not suspend device 0002:20:0e.0: error -22
eth0: resuming
PHY ID: 4061e4, addr: 0
eth2: Airport waking up
eth2: New link status: Connected (0001)
hda: Enabling Ultra DMA 2
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hdb: Enabling Ultra DMA 2
usb_endpoint usbdev1.1_ep00: PM: resume from 0, parent usb1 still 2
usb_endpoint usbdev1.1_ep81: PM: resume from 0, parent 1-0:1.0 still 2
usb_device usbdev1.1: PM: resume from 0, parent usb1 still 2
Driver sleep failed
Sleep rejected by devices
adb: starting probe task...
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
ADB mouse at 3, handler set to 4 (trackpad)
adb: finished probe task...
usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
eth2: Airport entering sleep mode
eth0: suspending, WakeOnLan disabled
Trying to free already-free IRQ 40
pci_set_power_state(): 0002:20:0e.0: state=3, current state=5
firewire_ohci: pci_set_power_state failed with -22<3>pci_device_suspend(): pci_suspend+0x0/0x9c [firewire_ohci]() returns -22
suspend_device(): pci_device_suspend+0x0/0x98() returns -22
Could not suspend device 0002:20:0e.0: error -22
eth0: resuming
PHY ID: 4061e4, addr: 0
eth2: Airport waking up
eth2: New link status: Connected (0001)
hda: Enabling Ultra DMA 2
hdb: Enabling Ultra DMA 2
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
The problem wa sinitiated by closing the lid. The iBook then seems to permanetly try to go to sleep (I can hear the cd-rom drive get periodically initialized). So above contains more than one iteration. 

The kernel is:

Linux kismet 2.6.22-1-powerpc #1 Sun Jul 29 13:58:06 CEST 2007 ppc GNU/Linux


The relveant debian package:

linux-image-2.6.22-1-powerpc_2.6.22-3_powerpc.deb


I'm running a mixture of debian testing/unstable.
The firewire and the USB connector were unused, the network connector was used.
If there are questions regarding other packages, or somebody wants me to test a fix (I would prever a debian package), don't hesitate - I would like to get the bug fixed :-) 

--
Gruß...
       Tim
Reply to: