sleep with ibook G4 (july05-modell)
Hi,
i played around with suspend-to-disk and suspend-to-ram. suspend-to-disk
works very fine on my new ibook, but i have still problems with
suspend-to-ram. i try it manually with
echo "mem" > /sys/power/state
and with the hibernate package.
I test nearly all settings in pbbuttonsd and also replaced it with pmud.
pmud dont run, reporting:
root@book:~# pmud -d -n
pmud[12801]: pmud [treshold = 420, margin = 15] started
pmud[12801]: opening /dev/adb
pmud[12801]: opening /dev/pmu
pmud[12801]: pmu_op(0xea, ..., version req)
PMU version 12: iBook/G3 Pismo/G4 Titanium
pmud[12801]: PMU version 12: iBook/G3 Pismo/G4 Titanium
pmud[12801]: No sleep support on this hardware, exiting!
pmud[12801]: daemon stopped (missing sleep support)
when i set up hibernate.conf with
UseSysfsPowerState mem
and run hibernate (or manually with echo "mem") my computer seems to do
everything what it should do before and afrer it "fell in sleep"
instead of sleeping it self. from /var/log/debug:
Oct 3 12:43:38 localhost kernel: [64725.545121] PM: suspend-to-disk
mode set to 'shutdown'
Oct 3 12:43:38 localhost kernel: [64725.545386] PM: Preparing system
for mem sleep
Oct 3 12:43:38 localhost kernel: [64725.620134] pmac_pm_prepare(3)
Oct 3 12:43:38 localhost kernel: [64726.088479] radeonfb
(0000:00:10.0): suspending to state: 3...
Oct 3 12:43:38 localhost kernel: [64726.091704] PM: Entering mem sleep
Oct 3 12:43:38 localhost kernel: [64726.091780] pmac_pm_enter(3)
Oct 3 12:43:38 localhost kernel: [64726.091883] PM: Finishing wakeup.
Oct 3 12:43:38 localhost kernel: [64726.091903] radeonfb
(0000:00:10.0): resuming from state: 3...
Oct 3 12:43:38 localhost kernel: [64727.232414] PHY ID: 4061e4, addr: 0
Oct 3 12:43:38 localhost kernel: [64732.502997] pmac_pm_finish(3)
I am also confused by the output, when pbbuttonsd starts:
Restarting pbbuttonsd: pbbuttonsd 0.7.1: iBook/G3 PB Pismo/G4 PB
Titanium (PMU version: 12)
Is this ok? Or is my laptop detected as a wrong model?
Is there somebody with a _new_ ibook G4 from july2005 (or later) with
working suspend-to-ram? Because i got some well-meant feedback from
users with the ibook G3 or the older ibook G4 from 2004 i will emphasise
that I have a newer modell, which is different (remember touchpad and
sound problems, maybe pmu or similiar have also changed).
If somebody has an working sleep on this model maybe i just have a
non-working configuration or use the wrong tools. Else maybe this is a
bug or missing feature, which should reported to somebody (unfortunately
I am not a programmer to fix it).
I am also interest in tips how to debug this issue better.
the only thing i missing from the x86-world is ACPI, but maybe I am
familiar with PMU soon. :-)
Regards,
Keywan
P.S.: Maybe this additional information is helpful:
prometoys@book:~$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 666MHz
revision : 0.5 (pvr 8003 0105)
bogomips : 663.55
machine : PowerBook6,7
motherboard : PowerBook6,7 MacRISC3 Power Macintosh
detected as : 287 (Unknown Intrepid-based)
pmac flags : 00000008
L2 cache : 512K unified
memory : 1024MB
pmac-generation : NewWorld
prometoys@book:~$ cat /sys/power/state
standby mem disk
prometoys@book:~$ cat /proc/pmu/info
PMU driver version : 2
PMU firmware version : 0c
AC Power : 1
Battery count : 1
--
Keywan Najafi Tonekaboni
http://www.prometoys.net
PGP Fingerprint: D5A1 A22E 3758 C9B4 57D2 3CAF EE52 1A78 C6A0 6934
people@world:/# apt-get --purge remove dominion
After unpacking world will be freed.
You are about to do something potentially beneficial
To continue type in the phrase 'Yes, do as We say!'
Reply to: