Re: iBook G3 owners
Okay, I'm using 2.6.12-rc2 with your patches as downloaded today. (Don't know
what's responsible for the Zilog and dm errors below, I'm using Ubuntu
Hoary's config from 2.6.10 brought forward with make oldconfig.) No Firewire
or USB devices attached. I'm booting without X ever running and without the
radeon module loaded. I've pasted my lsmod, dmesg and /proc/cpuinfo below.
The experience has actually been a little bizarre. The first time I tried
waking it up (with HAL running), it put some stuff about radeon and eth0 on
the screen and then froze. Couldn't SSH in, caps lock key light was working.
I figured I'd try again without HAL and capture the text of this particular
error later.
So I rebooted, turned HAL off, and slept it. I was delighted to see that it
woke back up. But when I tried to do anything, it seemed unable to access the
disk.
root@portastuvey:~ # ll /etc
/bin/ls- Success
Trying dmesg, it complained it didn't know about /bin/dmesg. Couldn't SSH in,
either. So I rebooted. Now, any time I sleep, it just wakes back up to a
black screen, HAL or no HAL.
Steve
-------------------------
root@portastuvey:~ # lsmod
Module Size Used by
cpufreq_userspace 5676 1
cpufreq_powersave 2016 0
cpufreq_ondemand 8060 0
ipv6 328040 15
af_packet 21480 2
ide_cd 51492 0
cdrom 50716 1 ide_cd
sungem 38852 0
sungem_phy 10368 1 sungem
ohci1394 42516 0
ieee1394 443504 1 ohci1394
ohci_hcd 26468 0
usbcore 146164 2 ohci_hcd
uninorth_agp 11272 1
agpgart 44188 1 uninorth_agp
evdev 12160 2
tsdev 9344 0
md 56156 0
dm_mod 73140 0
ext3 153320 1
jbd 72600 1 ext3
mbcache 11244 1 ext3
ide_disk 21952 3
via82cxxx 14876 0 [permanent]
trm290 5762 0 [permanent]
sl82c105 8032 0 [permanent]
siimage 14944 0 [permanent]
sc1200 10464 0 [permanent]
pdc202xx_old 14240 0 [permanent]
pdc202xx_new 13600 0 [permanent]
ns87415 5092 0 [permanent]
hpt366 24480 0 [permanent]
hpt34x 6464 0 [permanent]
generic 5248 0 [permanent]
cmd64x 14780 0 [permanent]
aec62xx 9280 0 [permanent]
unix 32532 166
root@portastuvey:~ # cat /proc/cpuinfo
processor : 0
cpu : 750FX
temperature : 11-13 C (uncalibrated)
clock : 400MHz
revision : 1.18 (pvr 7000 0112)
bogomips : 793.45
machine : PowerBook4,3
motherboard : PowerBook4,3 MacRISC2 MacRISC Power Macintosh
detected as : 257 (iBook 2 rev. 2)
pmac flags : 0000001b
L2 cache : 512K unified
memory : 640MB
pmac-generation : NewWorld
root@portastuvey:~ # dmesg
Total memory = 640MB; using 2048kB for hash table (at c0400000)
Linux version 2.6.12-rc2-1 (root@portastuvey) (gcc version 3.3.5 (Debian
1:3.3.5-8ubuntu2)) #2 Sat Apr 16 13:58:50 PDT 2005
Found UniNorth memory controller & host bridge, revision: 192
Mapped at 0xfdf00000
Found a Pangea mac-io controller, rev: 0, mapped at 0xfde80000
Processor NAP mode on idle enabled.
PowerMac motherboard: iBook 2 rev. 2
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=693, gen1=692
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 163840
DMA zone: 163840 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda4 ro quiet splash
PowerMac using OpenPIC irq controller at 0x80040000
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc62f000
OpenPIC timer frequency is 4.160000 MHz
PID hash table entries: 4096 (order: 12, 65536 bytes)
GMT Delta read from XPRAM: -480 minutes, DST: off
time_init: decrementer frequency = 24.835213 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 639168k available (1892k kernel code, 1184k data, 176k init, 0k
highmem)
AGP special page: 0xe7fff000
Calibrating delay loop... 1388.54 BogoMIPS (lpj=694272)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like
an initrd
Freeing initrd memory: 4376k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
Thermal assist unit using timers, shrink_timer: 2000 jiffies
Registering PowerMac CPU frequency driver
Low: 400 Mhz, High: 700 Mhz, Boot: 700 Mhz
audit: initializing netlink socket (disabled)
audit(1113690133.143:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
radeonfb (0000:00:10.0): Invalid ROM signature 8080 should be0xaa55
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Using Firmware dividers 0x0001003a from PPLL 0
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
Registered "ati" backlight controller,level: 15/15
radeonfb (0000:00:10.0): ATI Radeon LY
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
IN from bad port 3f9 at c0126720
IN from bad port 3f9 at c0126720
IN from bad port 3f9 at c0126720
IN from bad port 2f9 at c0126720
IN from bad port 2f9 at c0126720
IN from bad port 2f9 at c0126720
IN from bad port 3e9 at c0126720
IN from bad port 3e9 at c0126720
IN from bad port 3e9 at c0126720
IN from bad port 2e9 at c0126720
IN from bad port 2e9 at c0126720
IN from bad port 2e9 at c0126720
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
pmac_zilog: Error registering serial device, disabling pmac_zilog.
pmac_zilog: Did another serial driver already claim the minors?
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MacIO PCI driver attached to Pangea chipset
input: Macintosh mouse button emulation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ANSI.
input: ADB keyboard on adb2:2.c3/input
input: ADB Powerbook buttons on adb7:7.1f/input
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse on adb3:3.01/input
adb: finished probe task...
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
Probing IDE interface ide0...
hda: TOSHIBA MK4019GAX, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 2
ide0 at 0xe900e000-0xe900e007,0xe900e160 on irq 19
mice: PS/2 mouse device common for all mice
Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4376KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 176k init 4k chrp 32k prep
NET: Registered protocol family 1
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 655352k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Apple UniNorth/Pangea chipset
agpgart: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
ohci_hcd 0001:10:18.0: Apple Computer Inc. KeyLargo/Pangea USB
ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
ohci_hcd 0001:10:19.0: Apple Computer Inc. KeyLargo/Pangea USB (#2)
ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff]
Max Packet=[2048]
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:b9:90:1c
eth0: Found BCM5221 PHY
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000393fffeb9901c]
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
NET: Registered protocol family 17
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02746d8(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Reply to: