Re: iBook G3 700Mhz: sleep broke after upgrading from 2.6.10 to 2.6.11
Hello,
I have no solutions to the problems you encounter.
But I can share experiences as I run a very similar machine using a
2.6.11.4 kernel, compiled myself from upstream source (kernel-package
is my friend).
libook:/home/henning# cat /proc/cpuinfo
processor : 0
cpu : 750FX
temperature : 28 C (uncalibrated)
clock : 700MHz
revision : 1.2 (pvr 7000 0102)
bogomips : 1389.36
machine : PowerBook4,3
motherboard : PowerBook4,3 MacRISC2 MacRISC Power Macintosh
detected as : 257 (iBook 2 rev. 2)
pmac flags : 0000001b
L2 cache : 512K unified
memory : 640MB
pmac-generation : NewWorld
Francis J. Lacoste schrieb:
> I have an iBook G3 700Mhz, dual USB and run Sid.
Besides that I run a mix-up of hoary, sarge and sid.
> With kernel-image-2.6.10, when I ran fblevel 0 (or when the screensaver does
> the equivalent) the display becomes white with a ghost image of what was
> previously on the screen.
I had that issue with earlier kernels as well.
> eth0: suspending, WakeOnLan disabled
> radeonfb: suspending to state: 3...
> radeonfb: switching to D2 state...
> cpufreq: resume failed to assert current frequency is what timing core thinks
> it is.
> radeonfb: switching to D0 state...
> radeonfb: resumed !
> eth0: resuming
> PHY ID: 4061e4, addr: 0
> ide_pmac: Set UDMA timing for mode 2, reg: 0x1090038c
> hda: Enabling Ultra DMA 2
> ide_pmac: Set UDMA timing for mode 2, reg: 0x1090038c
> hdb: Enabling Ultra DMA 2
> adb: starting probe task...
> agpgart: Putting AGP V2 device at 0000:00:0b.0 into 2x mode
> agpgart: Putting AGP V2 device at 0000:00:10.0 into 2x mode
> adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
> ADB keyboard at 2, handler 1
> ADB mouse at 3, handler set to 4 (trackpad)
> adb: finished probe task...
> eth0: Link is up at 10 Mbps, half-duplex.
> eth0: Pause is disabled
>
> On 2.6.11 only the two first messages appear on the console after I open the
> lid. (Actually, the second message also contains the PCI device number).
>
Full ACK.
I'm having issues related to suspend-resume and power management in
general but lack time to hunt down on my own. Is there a comprehensive
guide to debug such problems efficiently?
Kind regards,
Henning Lorenzen
Reply to: