firewire CD-ROM

[Adam Done <mlist@donestudios.com>]

I have a firewire drive working great on my system but now I have
installed a firewire Lacie external CD burner and I see that Linux
recognize it when I dmsg.

        PCI: Enabling device 0001:11:03.0 (0004 -> 0005)
        ieee1394: Initialized config rom entry `ip1394'
        ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
        PCI: Enabling device 0001:11:0a.0 (0010 -> 0012)
        ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[63]
        MMIO=[80080000-800807ff]  Max Packet=[2048]
        ieee1394: Node added: ID:BUS[0-00:1023]  GUID[00d04b01070340de]
        ieee1394: Node added: ID:BUS[0-01:1023]  GUID[00d001010000a2fd]
        ieee1394: Host added: ID:BUS[0-03:1023]  GUID[000a27fffeda4b94]
        SCSI subsystem initialized
        sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
        scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
        ieee1394: sbp2: Node 0-00:1023: Using 36byte inquiry workaround
        ieee1394: sbp2: Logged into SBP-2 device
        ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
          Vendor: LACIE     Model: CDBP-241040A      Rev: 6.34
          Type:   CD-ROM                             ANSI SCSI revision:
        02
        scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
        sr0: scsi3-mmc drive: 16x/40x writer cd/rw xa/form2 cdda tray
        Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
        ieee1394: sbp2: Logged into SBP-2 device
        ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
          Vendor: FireWire  Model:  1394 Disk Drive  Rev:     
          Type:   Direct-Access                      ANSI SCSI revision:
        02
        SCSI device sda: 11733120 512-byte hdwr sectors (6007 MB)
        sda: cache data unavailable
        sda: assuming drive cache: write through
         sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
        Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
        PHY ID: 406212, addr: 0



I also looked at /proc/scsi/scsi:

        Attached devices:
        Host: scsi0 Channel: 00 Id: 00 Lun: 00
          Vendor: LACIE    Model: CDBP-241040A     Rev: 6.34
          Type:   CD-ROM                           ANSI SCSI revision:
        02
        Host: scsi1 Channel: 00 Id: 00 Lun: 00
          Vendor: FireWire Model:  1394 Disk Drive Rev:     
          Type:   Direct-Access                    ANSI SCSI revision:
        02



What I can't figure out is what sd device the cdrw is located at.  Dmesg
tells me it is there.  Has anyone else have any light on this subject.
Thanks in advance.

-Adam