KeyLargo USB not detected on G4 xserve using kernel 2.6
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello everyone,
I've been searching through the mailing-list archive but
haven't seen a similar problem report yet, so I'm asking
this here.
We have two G4 dual 1GHz xserves here, they are running 2.4.25-ben1
and working fine, including USB. In the process of upgrading
to 2.6 I had to realize the USB KeyLargo hardware isn't detected.
lspci on 2.4 says:
======================================================================
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE]
0000:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0000:10:0d.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge
0000:10:11.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge
0000:10:15.0 RAID bus controller: Promise Technology, Inc. PDC20270
(FastTrak100 LP/TX2/TX4) (rev 02)
0000:10:1b.0 RAID bus controller: Promise Technology, Inc. PDC20270
(FastTrak100 LP/TX2/TX4) (rev 02)
0000:11:07.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0000:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB <----
0000:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB <----
0000:12:02.0 Ethernet controller: Apple Computer Inc. Tigon3 Gigabit
Ethernet NIC (BCM5701) (rev 15)
0000:12:03.0 Ethernet controller: National Semiconductor Corporation
DP83820 10/100/1000 Ethernet Controller
0000:22:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0000:22:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100
0000:22:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2
FireWire (rev 01)
0000:22:0f.0 ffff: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev ff)
=====================================================================
while on 2.6.6:
=====================================================================
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 Ethernet controller: National Semiconductor Corporation
DP83820 10/100/1000 Ethernet Controller
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:01:0d.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge
0001:01:11.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge
0001:01:15.0 RAID bus controller: Promise Technology, Inc. PDC20270
(FastTrak100 LP/TX2/TX4) (rev 02)
0001:01:1b.0 RAID bus controller: Promise Technology, Inc. PDC20270
(FastTrak100 LP/TX2/TX4) (rev 02)
0001:02:02.0 ffff: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
(rev ff)
0001:02:03.0 ffff: Apple Computer Inc. Tigon3 Gigabit Ethernet NIC
(BCM5701) (rev ff)
0001:03:02.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE]
0001:03:03.0 Ethernet controller: Apple Computer Inc. Tigon3 Gigabit
Ethernet NIC (BCM5701) (rev 15)
0002:04:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:04:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100
0002:04:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2
FireWire (rev 01)
0002:04:0f.0 ffff: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev ff)
======================================================================
looks to me like a pci problem as the device obviously isn't even
enumerated. I tried several 2.6 versions, none of them fixed this.
Has anyone had similar problems or even a solution to this?
Any help is welcome.
Thomas Unger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Cygwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFBOJuEQ9JTxhYdf3wRAoD1AKCok14PttSTMOKzDSq86ea4tF1LugCfZuLM
NDHLLtgYmbLHYklgqMyQkmM=
=yd19
-----END PGP SIGNATURE-----
Reply to: