Hi again :)
> These are the info on my kernel.
>
> #>cat /proc/cpuinfo
> processor : 0
> cpu : 750FX
> temperature : 8 C (uncalibrated)
> clock : 400MHz <--- This is in power saving mode (800MHz at full speed)
> revision : 2.2 (pvr 7000 0202)
> bogomips : 792.57
>
This is mine :
celeborn:/home/klaus# cat /proc/cpuinfo
processor : 0
cpu : 7450, altivec supported
clock : 550MHz
revision : 2.1 (pvr 8000 0201)
bogomips : 546.81
machine : PowerBook3,3
motherboard : PowerBook3,3 MacRISC2 MacRISC Power Macintosh
detected as : 72 (PowerBook Titanium II)
pmac flags : 0000000b
L2 cache : 256K unified
memory : 512MB
pmac-generation : NewWorld
> #>cat /proc/cpufreq
> minimum CPU frequency - maximum CPU frequency - policy
> CPU 0 400000 kHz ( 50 %) - 400000 kHz ( 50 %) - performance
>
celeborn:/home/klaus# cat /proc/cpufreq
minimum CPU frequency - maximum CPU frequency - policy
> #>cat /sys/devices/system/cpu/cpu0/cpufreq/*
> /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
> 800000
> /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq
> 400000
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
> powersave userspace performance
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
> powermac
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> performance
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
> 400000
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
> 400000
celeborn:/home/klaus# cat /sys/devices/system/cpu/cpu0/cpufreq/*
cat: /sys/devices/system/cpu/cpu0/cpufreq/*: No such file or directory
>
> #>grep CPU_FREQ /boot/config-2.6.4
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_PROC_INTF=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_24_API=y
> CONFIG_CPU_FREQ_PMAC=y
> CONFIG_CPU_FREQ_TABLE=y
>
Same here :
celeborn:/home/klaus# grep CPU_FREQ /boot/config-2.6.3-ben2
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_PMAC=y
CONFIG_CPU_FREQ_TABLE=y
>
> > What utils work the best on mac ? Can you send me a
> >cpufreqd.conf for my powerbook ? I've had problems configuring it, and
> >I haven't been able to find my help online, not as to configuring
> >cpufreqd on a mac, at least, so if you could point me to any help on
> >that, it would be appreciated.
>
Thanks for the file :)
> I don't use cpudynd. I tried twice and it did nothing visible.
ok
> I think so. With cpufreqd My ibook is almost always running at 400MHz
> instead of 800 normally and cpu temp stays around 48-53 degrees when
> editing and compiling moderately. It climbs to 60 when compiling kernel
> or reading DVDs.
>
good :)
Something is really wrong here :
celeborn:/home/klaus# /etc/init.d/cpufreqd start
CPU Frequency daemon: no supported power management interface found.
So something must be missing in the kernel - I have no idea what ...
Is something wrong with the kernel I am using maybe ? (2.6.3-ben2 +
laptop patch from http://www.xs4all.nl/~bsamwel/laptop_mode/index.html)
Thanks again for your help.
--
Med venlig hilsen
Klaus Agnoletti
System Tekniker
Se vores nye Typo3 CMS baserede website på www.fab-it.dk
____________________________________________
Fab:IT ApS Telefon: 333 111 17
Vesterbrogade 50 Døgnvagt: 333 134 40
1620 København V Telefax: 333 136 40
www.fab-it.dk klaus@fab-it.dk
Attachment:
signature.asc
Description: This is a digitally signed message part