Re: [ALSA] Problem on G3-266

[Matthieu Oppliger <matthieu.linux@swissinfo.org>]

Le jeu 04/11/2004 à 15:59, Martin Habets a écrit :

> > Hello !
> > I try to use ALSA on my G3-266.
> > 
> > After recompilation of my kernel (2.6.8),with ALSA drivers as modules,
> > i did apt-get install alsa.
> > 
> > Then alsaconf - finds powermac - PowerMac sound card. It seems that
> > alsaconf did'nt put snd and snd-powermac in my /etc/modules, so I did it
> > myself.
> 
> I think you'll find it has updated /etc/modules.d for you.
> 
> > After alsaconf, it tells me :
> > _____
> > Running update-modules...
> > Loading driver...
> > Starting ALSA.../etc/init.d/alsa: Error: alsactl restore failed with
> > message 'ALSA lib control.c:654:(snd_ctl_open_noupdate) Invalid CTL hw:0
> > alsactl: set_controls:986: snd_ctl_open error: No such file or
> > directory'.
> > done.
> > Setting default volumes...
> > 
> > ===============================================================================
> ...
> > Any idea of something missing ?
> 
> I think you are missing the device files in /dev/snd/. If so, you need
> to run the snddevices script found in the alsa-driver sources.

Thank you, I found it, and ran it. Then /etc/init.d/alsa restart. Same
happens.

> If that does not help, send the output of lsmod and relevant dmesg
> output.
Here they are, hoping it can help you to help me...thank you for your
help !

# lsmod
Module                  Size  Used by
snd_pcm_oss            78400  -
snd_mixer_oss          24848  -
snd_powermac           44560  -
snd_pcm               133820  -
snd_page_alloc         14144  -
snd_timer              32292  -
snd                    72004  -
soundcore              11640  -

# dmesg
Total memory = 288MB; using 1024kB for hash table (at c0400000)
Linux version 2.6.8-20041103 (root@stratus) (version gcc 3.3.4 (Debian
1:3.3.4-13)) #1 Wed Nov 3 16:31:42 CET 2004
Found a Heathrow mac-io controller, rev: 1, mapped at 0xfde00000
PowerMac motherboard: PowerMac G3 (Gossamer)
Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus
number: 0->0
nvram: OF partition at 0x1800
nvram: XP partition at 0x1300
nvram: NR partition at 0x1400
On node 0 totalpages: 73728
  DMA zone: 73728 pages, LIFO batch:16
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=radeonfb:800x600@85
System has 64 possible interrupts
PID hash table entries: 2048 (order 11: 16384 bytes)
GMT Delta read from XPRAM: 60 minutes, DST: off
via_calibrate_decr: ticks per jiffy = 16707 (1002461 ticks)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 286784k available (2492k kernel code, 1116k data, 356k init, 0k
highmem)Calibrating delay loop... 532.48 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 2 of device 0000:00:12.0
PCI: Cannot allocate resource region 1 of device 0000:00:0d.0
PCI: Cannot allocate resource region 1 of device 0000:00:12.0
Registering pmac pic with sysfs...
SCSI subsystem initialized
PCI: Enabling device 0000:00:0d.0 (0086 -> 0087)
radeonfb: Found Open Firmware ROM Image
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz,
System=183.00 MHz
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type CRT found
radeonfb: EDID probed
radeonfb: ATI Radeon QY  DDR SGRAM 32 MB
Thermal assist unit using timers, shrink_timer: 2000 jiffies
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Console: switching to colour frame buffer device 100x37
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0xf3013020 (irq = 15) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0xf3013000 (irq = 16) is a Z85c30 ESCC - Serial port
fd0: SWIM3 floppy controller
Using anticipatory io scheduler
register_blkdev: cannot get major 2 for fd
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
MacIO PCI driver attached to Heathrow chipset
eth0: BMAC at 00:05:02:de:05:16
Macintosh CUDA driver v0.5 for Unified ADB.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AEC6260R: IDE controller at PCI slot 0000:00:0e.0
AEC6260R: chipset revision 1
AEC6260R: ROM enabled at 0x81820000
AEC6260R: 100% native mode on irq 24
    ide2: BM-DMA at 0x0800-0x0807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x0808-0x080f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
adb: starting probe task...
adb devices: [2]: 2 5 [3]: 3 1
ADB keyboard at 2, handler set to 3
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard on adb2:2.05/input
ADB mouse at 3, handler set to 4
input: ADB mouse on adb3:3.01/input
adb: finished probe task...
Probing IDE interface ide3...
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
ide3 at 0x820-0x827,0x812 on irq 24
ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 13
Probing IDE interface ide0...
hda: IC35L040AVVN07-0, ATA DISK drive
hda: MDMA, cycleTime: 120, accessTime: 75, recTime: 45
hda: Set MDMA timing for mode 2, reg: 0x00211526
hda: Enabling MultiWord DMA 2
ide0 at 0xd40b1000-0xd40b1007,0xd40b1160 on irq 13
ide1: Found Apple Heathrow ATA controller, bus ID 1, irq 14
Probing IDE interface ide1...
hdc: MATSHITA CR-585, ATAPI CD/DVD-ROM drive
Unhandled interrupt e, disabled
hdc: MDMA, cycleTime: 150, accessTime: 75, recTime: 75
hdc: Set MDMA timing for mode 1, reg: 0x00221526
hdc: Enabling MultiWord DMA 1
ide1 at 0xd40b6000-0xd40b6007,0xd40b6160 on irq 14
Probing IDE interface ide2...
hdg: max request size: 128KiB
hdg: 80315072 sectors (41121 MB) w/1902KiB Cache, CHS=65535/16/63,
UDMA(66)
 /dev/ide/host2/bus1/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8
hda: max request size: 128KiB
hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63,
(U)DMA
 /dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
mesh: configured for synchronous 5 MB/s
mesh: performing initial bus reset...
scsi0 : MESH
  Vendor: AGFA      Model: ARCUS II          Rev: 1.70
  Type:   Scanner                            ANSI SCSI revision: 07
mesh_host_reset
mesh_host_reset
mesh_host_reset
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi removable disk sda at scsi0, channel 0, id 5, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0,  type 6
Attached scsi generic sg1 at scsi0, channel 0, id 5, lun 0,  type 0
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 356k init 4k chrp 8k prep
Adding 500092k swap on /dev/hda4.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
phy registers:
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000


> 
> -- 
> Martin
>