My airport card doesn't work
From: Leandro Noferini <lnoferin@cybervalley.org>
Subject: My airport card doesn't work
To: debian-powerpc@lists.debian.org
Summary:
Keywords:
User-Agent: tin/1.5.14-20020917 ("Chop Suey!") (UNIX) (Linux/2.4.20-rc4-ben0 (ppc))
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Ciao a tutti,
I am trying to use my airport card on an iBook tangerine 300 mhz and an
Access Point D-Link DWL900AP but it doesn't work.
Let me explain:
- kernel 2.4.20-rc4-ben0 taken from source. I ahve tried also with other
kernels but nothing changed;
- this is syslog when I modprobe airport
Jan 25 16:57:08 clementino kernel: hermes.c: 5 Apr 2002 David Gibson
<hermes@gibson.dropbear.id.au>
Jan 25 16:57:08 clementino kernel: orinoco.c 0.11b (David Gibson
<hermes@gibson.dropbear.id.au> and
Jan 25 16:57:09 clementino kernel: airport.c 0.11b (Benjamin
Herrenschmidt <benh@kernel.crashing.orgJan 25 16:57:10 clementino
kernel: eth1: Station identity 001f:0001:0004:0010
Jan 25 16:57:10 clementino kernel: eth1: Looks like a Lucent/Agere
firmware version 4.16
Jan 25 16:57:10 clementino kernel: eth1: Ad-hoc demo mode supported
Jan 25 16:57:10 clementino kernel: eth1: MAC address 00:30:65:07:A1:89
Jan 25 16:57:10 clementino kernel: eth1: Station name "HERMES I"
Jan 25 16:57:10 clementino kernel: eth1: ready
Jan 25 16:57:10 clementino kernel: airport: card registered for
interface eth1
- when I try pump -i eth1 sometimes I receive on the console this error:
clementino:~# pump -i eth1
eth1: error -5 reading info frame. Frame dropped.
- I changed also the AP but nothing changed again.
I think to everything should be right, only a question: what kind of
routing table I have to make for AP from router?
Some help?
--
Ciao
leandro
Ed è importante non faccia cose a cui non credo
per non confondermi e per non dover tornare indietro
(Tiro Mancino - È necessario)
--
Ciao
leandro
Ed è importante non faccia cose a cui non credo
per non confondermi e per non dover tornare indietro
(Tiro Mancino - È necessario)
Reply to: