Re: PCMCIA && Firewire
Thanks Uwe
On 15-Apr-02 Uwe Steinmann wrote:
> On Sun, Apr 14, 2002 at 05:55:05PM +0200, Fritz Wettstein wrote:
snip...
>> Starting PCMCIA services: modules Linux Kernel Card Services 3.1.22
>> options [pci] [cardbus] [pm]
>> Intel PCIC probe: not found
>> /lib/modules/2.4.19-pre6-ben0/pcmcia/i82365.o: init_module: no such device
>> Hint:.....
>> ds: no socket drivers loaded
>> /lib/modules/2.4.19-pre6-ben0/pcmcia/ds.0: init_module: Operation not
>> permitted
>> Hint:....
>> cardmgr
> You must set PCIC in /etc/default/pcmcia to yenta_socket
>
snip...
The warnings went away but still I'm unable to access the tape:
root[/root]/tail /var/log/messages
Apr 17 09:46:00 w913700 kernel: eth0: Pause is disabled
Apr 17 09:46:01 w913700 lpd[398]: restarted
Apr 17 09:46:01 w913700 kernel: Linux Kernel Card Services 3.1.22
Apr 17 09:46:01 w913700 kernel: options: [pci] [cardbus] [pm]
Apr 17 09:46:01 w913700 kernel: Yenta IRQ list 0000, PCI irq58
Apr 17 09:46:01 w913700 kernel: Socket status: 30000869
Apr 17 09:46:02 w913700 kernel: cs: cb_alloc(bus 2): vendor 0x9004, device
0x6075
Apr 17 09:46:02 w913700 kernel: PCI: Enabling device 02:00.0 (0000 -> 0003)
Apr 17 09:46:02 w913700 kernel: ahc_pci:2:0:0: Host Adapter Bios disabled.
Using default SCSI device parameters
Apr 17 09:46:02 w913700 /etc/hotplug/pci.agent: ... no modules for PCI slot
02:00.0
root[/root]mt -f /dev/st0 rewind
mt: /dev/st0: No such device
root[/root]
--
To UNSUBSCRIBE, email to debian-powerpc-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: