ibm 7043 custom kernel booting
Hi,
I have a strange problem with booting ibm 7043-150 off my custom kernel.
For some reason it can't find the interpreter
Unable to load interpreter /lib/ld.so.1
Kernel panic: No init found. Try passing init= option to kernel.
However, ld.so.1 and /sbin/init exist
lrwxrwxrwx 1 root root 11 Mar 11 18:08 /lib/ld.so.1 ->
ld-2.2.5.so
-rwxr-xr-x 1 root root 108889 Mar 11 18:06 /lib/ld-2.2.5.so
-rwxr-xr-x 1 root root 31872 Jan 25 22:03 /sbin/init
Also, I tried to boot with libc6 compiled on that machine with the same
result.
Does anyone have any idea what's going on?
here is the complete boot message
(root on /dev/sda3, swap /dev/sda2, PreP boot /dev/sda1
booting using Debian yaboot version 1.3.6-1)
Total memory = 768MB; using 2048kB for hash table (at c0400000)
Linux version 2.2.16 (root@ah0012) (gcc version 2.95.4 20011002 (Debian
prerelease)) #9 Mon Mar 11 2
Boot arguments: root=/dev/sda3 ro
Warning: no mac-io found
PCI buses 0..1 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (2999 jiffies)
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fcec0000
OpenPIC timer frequency is not set
time_init: decrementer frequency = 1246851180/60
Calibrating delay loop... 249.04 BogoMIPS
Memory: 19124k available (952k kernel code, 11064k data, 92k init)
[c0000000,f0000000]
Dentry hash table entries: 131072 (order 8, 1024k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Warning: no ADB interface detected
Don't know how to access NVRAM with 4 addresses
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Starting kswapd v 1.5
initialize_kbd: Keyboard reset failed, no ACK
Serial driver version 4.27 with<4>Keyboard timeout[2]
Keyboard timeout[2]
no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 0, device 16, function 0
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xfcebe000, io_port=0xbffc00, irq=23
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xfcebf000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
Vendor: IBM Model: DDRS-34560D Rev: DC2G
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: IBM Model: CDRM00203 !K Rev: 1_01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sym53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0
sym53c875-0-<1,0>: tagged command queue depth set to 8
sym53c875-0-<4,0>: tagged command queue depth set to 8
scsi : detected 3 SCSI generics 1 SCSI cdrom 2 SCSI disks total.
sym53c875-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
Uniform CD-ROM driver Revision: 3.09
sym53c875-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8813870 [4303 MB] [4.3 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7
GB]
pcnet32.c: PCI bios is present, checking for devices...
PCI Master Bit has not been set. Setting...
Found PCnet/PCI at 0xbff800, irq 22.
eth0: PCnet/FAST 79C971 at 0xbff800, 00 04 ac 17 16 47
tx_start_pt(0x0400): 64 bytes, BCR18(68a1):BurstWrEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
pcnet32.c:v1.25kf 26.9.1999 tsbogend@alpha.franken.de
Partition check:
sda: sda1 sda2 sda3
sdb: sdb1 sdb2 sdb3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 92k init 32k prep 8k pmac
Unable to load interpreter /lib/ld.so.1
Kernel panic: No init found. Try passing init= option to kernel.
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
Reply to: