CD Rom unreachable.. dev is not in /dev dir

[Adam <adamhadm@frontiernet.net>]

I have a 2nd ide card in my box and my ide devices have been swithed around becouse of the card.  My cdrom is now on ide hdi 

from my sys log file:


>     pmac_ide: enabling IDE bus ID 0
>     
>     hda: IC35L060AVER07-0, ATA DISK drive
>     
>     hdb: Maxtor 92048D8, ATA DISK drive
>     
>     ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>     
>     hdf: QUANTUM FIREBALLP LM30, ATA DISK drive
>     
>     hdi: MATSHITADVD-ROM SR-8583, ATAPI CD/DVD-ROM drive
>     
>     hdj: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
>     
>     ide0 at 0x1c90-0x1c97,0x1c82 on irq 26
>     
>     ide2 at 0x1c40-0x1c47,0x1c32 on irq 23
>     
>     ide4 at 0xf4894000-0xf4894007,0xf4894160 on irq 13
>     
>     hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(33)
>     
>     hdb: 40000464 sectors (20480 MB) w/1024KiB Cache, CHS=39683/16/63, UDMA(33)
>     
>     hdf: 58633344 sectors (30020 MB) w/1900KiB Cache, CHS=58168/16/63, UDMA(66)
>     
>     hdi: Enabling MultiWord DMA 2
>     
>     ide_pmac: MDMA, cycleTime: 120, accessTime: 75, recTime: 45
>     
>     ide_pmac: Set MDMA timing for mode 2, reg: 0x00211526
>     
>     hdi: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
>     
>     Uniform CD-ROM driver Revision: 3.12
>     
>     Partition check:
>     
>     /dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
>     
>     p14
>     
>     /dev/ide/host0/bus0/target1/lun0: [mac] p1 p2 p3 p4 p5 p6 p7
>     
>     /dev/ide/host2/bus0/target1/lun0: [mac] p1 p2 p3 p4 p5 p6
>     
When I cd into my /dev dir and did a 
ls hd* - no hdi or any thing after hdh is listed... 

Is there a way in which I can get more hd devices in my /dev dir?  I would like to access the cdrom drive..

Thank you,

Adam