Re: ide disk no longer found (rsync-benh)
On Wed, Sep 26, 2001 at 06:51:03PM -0600, Bradley C. Midgley wrote:
> using the same config, the current 2.4-benh kernel (2.4.10-ben0) fails to
> find my ide drive whereas an older benh kernel (2.4.5-pre3) finds it with
> no trouble. [both have dma enabled and on by default; in fact the compile
> fails if i don't do it that way]
>
[snip]
>
> any idea why it doesn't work?
>
I got the same error on PowerBook G3 Wallstreet II 266, kernel 2.4.10-ben0
Here's what I hand copied from the broken kernel:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pmac_ide: enabling IDE bus ID 0
ide-pmac(ata1): can't request IO resource !
loop: loaded (max 8 devices)
Then it freezes. Here's what my working kernel (2.4.5-pre5) shows:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pmac_ide: enabling IDE bus ID 0
Registered ide 1 for media bay 0
hda: TOSHIBA MK1814GAV, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8182, ATAPI CD/DVD-ROM drive
ide0 at 0xcf81d000-0xcf81d007,0xcf81d160 on irq 13
ide1 at 0xcf821000-0xcf821007,0xcf821160 on irq 14
hda: Enabling MultiWord DMA 2
hda: 35433216 sectors (18142 MB), CHS=35152/16/63, (U)DMA
hdc: Enabling MultiWord DMA 2
hdc: ATAPI 12X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
loop: loaded (max 8 devices)
Hope that helps someone figure out what's going on...
Vinod
Reply to: