[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

pcmcia vs. mvista rsync


i tried the mvista kernel i synced yesterday
(source.mvista.com::linuxppc_2_4_devel) but pcmcia doesn't work.

my old config.opts had this (probably not perfect but it worked)

 include port 0x4000-0x40ff, port 0x4400-0x44ff
 include memory 0x80000000-0x803ff000, memory 0xfd000000-0xfd3ff000

should lspci come up with new i/o ranges? i tried several different
combinations of i/o in pcmcia's config.opts but i when i insert a
card i always get the message

 cs: unable to map card memory!

this is the actual difference:

--- lspci-2.4.5	Sat Sep  8 00:59:20 2001
+++ lspci-2.4.10	Sat Sep  8 01:07:40 2001
@@ -21,10 +21,10 @@
 00:13.0 CardBus bridge: Texas Instruments PCI1211
 	Flags: bus master, medium devsel, latency 168, IRQ 22
 	Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
-	Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
+	Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
 	Memory window 0: fd000000-fd3ff000 (prefetchable)
 	Memory window 1: 80000000-803ff000
-	I/O window 0: 00001000-000010ff
-	I/O window 1: 00001400-000014ff
+	I/O window 0: 00004000-000040ff
+	I/O window 1: 00004400-000044ff
 	16-bit legacy interface ports at 0001

Brad Midgley

Reply to: