Re: Re: Modem problems
> Hi,
>
> Stefan Heimann wrote:
>
> > Hi!
> >
> > I use a Powerbook G3 with woody. After upgrading to Kernel 2.4.6, the modem doesn't work! I tried /dev/ttyS0, /dev/ttyS2, /dev/ttyS3, /dev/ttyS4: no way.
> > Then I detected a startup message:
> > Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IQ SERIAL_PCI enabled
> > IN from bad port 3f9 at cd925084
> > ...
> >
> > With kernel 2.2.x, the modem worked fine. Could anyone help??
>
> 'insmod macserial' should give you a better result.
>
> exert from my dmesg:
> PowerMac Z8530 serial driver version 2.0
> tty00 at 0xd58ae020 (irq = 22) is a Z8530 ESCC (cobalt modem)
> tty01 at 0xd58b5000 (irq = 50) is a Z8530 ESCC
>
ok, I tried it and got:
PowerMac Z8530 serial driver version 2.0
tty00 at 0xd58ae020 (irq = 22) is a Z8530 ESCC (cobalt modem)
tty01 at 0xd58b5000 (irq = 50) is a Z8530 ESCC
but some lines later:
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IQ SERIAL_PCI enabled
IN from bad port 3f9 at cd925084
...
When I try to use wvdial (with my old config-file), I get the message:
modem not responding.
When I try to create a new config file with wvdialconf, the answer is:
irda_setup timed out on 1st byte
...
Sorry, no modem found.
Here is the output for lsmod (before running wvdialconf):
macserial
pcmcia_core
and after running wvdialconf:
serial
macserial
pcmcia_core
Can anyone help??
Bye Stefan
______________________________________________________________________________
Sie surfen im Internet statt im Meer? Selbst schuld!
Auf zum Strand: http://lastminute.de/?PP=1-0-100-105-1
Reply to: