Re: Troubles upgrading from 200 MHz P2 to 400 MHz G3...
> * What kernel and/or what driver runs the ix3D properly (if any)?
What graphics chip does it have? If you don't know, please post the output of
'lspci|grep VGA'.
Here's the whole bus, or, at least all of PCI bus that 2.2.18 <vanilla> can
find:
# lspci -v
00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03)
Flags: bus master, medium devsel, latency 32
00:0d.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Flags: bus master, medium devsel, latency 32, IRQ 23
Memory at 80800000 (32-bit, non-prefetchable) [disabled]
00:0e.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA])
Flags: medium devsel, IRQ 24
Memory at 84000000 (32-bit, non-prefetchable) [disabled]
Expansion ROM at 80810000 [disabled]
00:0f.0 Display controller: Integrated Micro Solutions Inc.: Unknown device 9135 (rev 01)
Flags: medium devsel, IRQ 25
Memory at 90000000 (32-bit, prefetchable)
Expansion ROM at 80840000 [disabled]
00:10.0 Class ff00: Apple Computer Inc. Grand Central I/O (rev 02)
Flags: bus master, medium devsel, latency 32
Memory at f3000000 (32-bit, non-prefetchable)
'lspci' and/or LINUX only seems to be seeing PCI bus 0, which everything
except a wide-SCSI card is currently plugged into. The so-called 'IMS'
card (actually an ix3D) iswhat MacOS and LINUX are able to use so far.
For those not listening earlier, i have a PowerMac 9500 with an XLR8 400 MHz
G3, a IXMicro video card and a couple of other things that don't quite work
right yet. I'm using 2.2.18 per Ethan Benson's suggestion. (I also have a
2.4.0-test4 kernel which works except for minor mouse confusion.)
Here's some 'dmesg' extracts to provide additional details:
Total memory = 384MB; using 2048kB for hash table (at c0400000)
Linux version 2.2.18 (tvr@G3) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #6 Fri Feb 9 16:28:53 PST 2001
PCI bus 0 controlled by bandit at f2000000
Cache coherency enabled for bandit/PSX at f2000000
PCI bus 1 controlled by bandit at f4000000
Cache coherency enabled for bandit/PSX at f4000000
...
Memory: 384740k available (1240k kernel code, 7152k data, 84k init) [c0000000,d8000000]
...
MacOS display is /bandit/IMS,tt3d
Using unsupported 1024x768 IMS,tt3d at 90000020, depth=8, pitch=1024
Console: switching to colour frame buffer device 128x48
fb0: Open Firmware frame buffer device on /bandit/IMS,tt3d
And here's an X server's opinion
XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
...
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0001 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00
(II) PCI: 00:0e:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00 hdr 00
(II) PCI: 00:0f:0: chip 10e0,9135 card 0000,0000 rev 01 class 03,80,00 hdr 00
(II) PCI: 00:10:0: chip 106b,0002 card 0000,0000 rev 02 class ff,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI: (0:14:0) S3 Trio32/64 rev 84, Mem @ 0x84000000/26
(--) PCI: (0:15:0) IMS unknown chipset (0x9135) rev 1, Mem @ 0x90000000/27
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
[1] -1 0x80840000 - 0x8087ffff (0x40000) MX[B](B)
[2] -1 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0x80800000 - 0x80ffffff (0x800000) MX[B]E
[1] -1 0x80810000 - 0x8081ffff (0x10000) MX[B](B)
[2] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
[1] -1 0x80840000 - 0x8087ffff (0x40000) MX[B](B)
[2] -1 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
[0] -1 0xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
[1] -1 0x80840000 - 0x8087ffff (0x40000) MX[B](B)
[2] -1 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[3] -1 0x80800000 - 0x80ffffff (0x800000) MX[B]E
[4] -1 0x80810000 - 0x8081ffff (0x10000) MX[B](B)
[5] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
...
#
As you can see, there is now also another display card plugged in, which
MacOS doesn't recognize. (I also have a TGUI9685 card, if that helps might
work.) I don't care much which works with X, but i presume i need it to
be in native (as opposed toMacOS framebuffer) mode, as my eyesight requires
the resolution to be dynamically set in X Windows.
I've gotten it almost working, by setting the MacOS screen parameters to
1024x768x8. Then the penguin and the text look clean upon bootup via
either BootX or the HFS boot floppy, except that everything is rotated
about 4 character positions to the left [32 bits perhaps??] and characters
are not erased properly when the screen is redrawn. I've not managed to
get an X server to work properly in native mode, only text-only video
when the MacOS (and/or its boot ROM?) has left the card in the right
state.
Questions:
* What kernel and/or what driver runs the ix3D properly (if any)?
* Can the S3 Trio64+ or TGUI9685 be made to work under X Windows at
least?
* Is the ixMicro card (or above) even worth bothering with? If not,
are there modestly priced video cards which are Mac-compatable and
LINUX-friendly? (I don't care how well they work for games, as i
don't play them.)
Let's try one problem at a time and see if progress can be made that way.
I don't mind kernel or driver hacking to make this thing work, but i want
to do something reasonably expedient about this.
-- Tovar
Reply to: