[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#613253: marked as done (openoffice.org-impress: Starting the presentation leaves normal GUI behind, no presentation viewable)

Your message dated Thu, 16 May 2013 09:53:16 +0000
with message-id <E1Ucus8-0005SM-00@franck.debian.org>
and subject line Bug#706870: Removed package(s) from unstable
has caused the Debian Bug report #613253,
regarding openoffice.org-impress: Starting the presentation leaves normal GUI behind, no presentation viewable
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
613253: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613253
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: openoffice.org-impress
Version: 1:3.2.1-11+squeeze2
Severity: important

*** Please type your report below this line ***
When starting a presentation created by the impress package of openoffice, the normal editing window remains visible, and the presentation never shows up. However, openoffice acts *as if* there would be presentation showing, including advancing to the next slide with "space". It no longer reacts on the mouse, but returns to normal mode if the space bar has been pressed often enough. Apparently, the program assumes to show 
the presentation, though it never gets visible.
Probably the problem is related to the graphics setup of the machine; it uses the "intel" graphics driver which supports multiview, though is not configured to do so. Impress does not show a secondary monitor to present the notes on - the presentation customizer remains 
blank at the location where multiple screens would be supported.

For completeness, here is the output of xrandr -q --verbose:

Screen 0: minimum 320 x 200, current 2048 x 1536, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
        Identifier: 0x41
        Timestamp:  83569
        Subpixel:   unknown
        Clones:
        CRTCs:      0 1
        Transform:  1.000000 0.000000 0.000000
                    0.000000 1.000000 0.000000
                    0.000000 0.000000 1.000000
                   filter:
LVDS1 connected 2048x1536+0+0 (0x45) normal (normal left inverted right x axis y axis) 0mm x 0mm panning 2048x1536+0+0 
        Identifier: 0x42
        Timestamp:  83569
        Subpixel:   horizontal rgb
        Gamma:      1.0:1.0:1.0
        Brightness: 1.0
        Clones:
        CRTC:       1
        CRTCs:      1
        Panning:    2048x1536+0+0
        Tracking:   0x0+0+0
        Border:     0/0/0/0
        Transform:  1.000000 0.000000 0.000000
                    0.000000 1.000000 0.000000
                    0.000000 0.000000 1.000000
                   filter:
        BACKLIGHT: 7 (0x00000007)       range:  (0,7)
        Backlight: 7 (0x00000007)       range:  (0,7)
        scaling mode:   Full
supported: None Full Center Full aspect 
  1024x768 (0x45)   65.0MHz *current +preferred
h: width 1024 start 1048 end 1184 total 1248 skew 0 clock 52.1KHz v: height 768 start 771 end 777 total 868 clock 60.0Hz 
  1024x768 (0x46)   94.5MHz +HSync +VSync
h: width 1024 start 1072 end 1168 total 1376 skew 0 clock 68.7KHz v: height 768 start 769 end 772 total 808 clock 85.0Hz 
  1024x768 (0x47)   78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.0KHz v: height 768 start 769 end 772 total 800 clock 75.0Hz 
  1024x768 (0x48)   75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz v: height 768 start 771 end 777 total 806 clock 70.1Hz 
  1024x768 (0x49)   65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 
  1024x768 (0x4a)   44.9MHz +HSync +VSync Interlace
h: width 1024 start 1032 end 1208 total 1264 skew 0 clock 35.5KHz v: height 768 start 768 end 776 total 817 clock 43.5Hz 
  832x624 (0x4b)   57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz v: height 624 start 625 end 628 total 667 clock 74.6Hz 
  800x600 (0x4c)   56.3MHz +HSync +VSync
h: width 800 start 832 end 896 total 1048 skew 0 clock 53.7KHz v: height 600 start 601 end 604 total 631 clock 85.1Hz 
  800x600 (0x4d)   50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz v: height 600 start 637 end 643 total 666 clock 72.2Hz 
  800x600 (0x4e)   49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz v: height 600 start 601 end 604 total 625 clock 75.0Hz 
  800x600 (0x4f)   40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 
  800x600 (0x50)   36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 
  640x480 (0x51)   36.0MHz -HSync -VSync
h: width 640 start 696 end 752 total 832 skew 0 clock 43.3KHz v: height 480 start 481 end 484 total 509 clock 85.0Hz 
  640x480 (0x52)   31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz v: height 480 start 489 end 492 total 520 clock 72.8Hz 
  640x480 (0x53)   31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz v: height 480 start 481 end 484 total 500 clock 75.0Hz 
  640x480 (0x54)   25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz 
  720x400 (0x55)   35.5MHz -HSync +VSync
h: width 720 start 756 end 828 total 936 skew 0 clock 37.9KHz v: height 400 start 401 end 404 total 446 clock 85.0Hz 
  640x400 (0x56)   31.5MHz -HSync +VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz v: height 400 start 401 end 404 total 445 clock 85.1Hz 
  640x350 (0x57)   31.5MHz +HSync -VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz v: height 350 start 382 end 385 total 445 clock 85.1Hz 
DVI1 disconnected (normal left inverted right x axis y axis)
        Identifier: 0x43
        Timestamp:  83569
        Subpixel:   horizontal rgb
        Clones:
        CRTCs:      0 1
        Transform:  1.000000 0.000000 0.000000
                    0.000000 1.000000 0.000000
                    0.000000 0.000000 1.000000
                   filter:
TV1 disconnected (normal left inverted right x axis y axis)
        Identifier: 0x44
        Timestamp:  83569
        Subpixel:   unknown
        Clones:
        CRTCs:      0 1
        Transform:  1.000000 0.000000 0.000000
                    0.000000 1.000000 0.000000
                    0.000000 0.000000 1.000000
                   filter:
        bottom margin: 37 (0x00000025)  range:  (0,100)
        right margin: 46 (0x0000002e)   range:  (0,100)
        top margin: 36 (0x00000024)     range:  (0,100)
        left margin: 54 (0x00000036)    range:  (0,100)
        mode:   NTSC-M
                supported: NTSC-M       NTSC-443     NTSC-J       PAL-M
                           PAL-N        PAL          480p@59.94Hz 480p@60Hz
                           576p         720p@60Hz    720p@59.94Hz 720p@50Hz
                           1080i@50Hz   1080i@60Hz   1080i@59.94H


And here is the xorg.conf:

Section "Files"
        FontPath        "unix/:7100"
        FontPath        "unix/:7101"
        FontPath        "/usr/share/fonts/X11/misc"
        #FontPath       "/usr/X11R6/lib/X11/fonts/misc"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        #FontPath       "/var/lib/defoma/gs.d/dirs/fonts"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "vbe"
        Load    "synaptics"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "SendCoreEvents"        "on"
        Option          "XkbRules"              "xorg"
        Option          "XkbModel"              "pc105"
        Option          "XkbLayout"             "de"
        Option          "XkbVariant"            "thor"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "SendCoreEvents"        "on"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
Option "Device" "/dev/input/by-path/platform-i8042/serio-4-event-mouse" 
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"
        Option          "SHMConfig"             "on"
        Option          "UpDownScrolling"       "off"
        Option          "MaxTapTime"            "200"
        Option          "MaxDoubleTapTime"      "400"
        Option          "FastTaps"              "on"
        Option          "FingerHigh"            "60"
        Option          "PalmDetect"            "on"
        Option          "PalmMinWidth"  "6"
        Option          "LockedDrags"           "off"
EndSection


Section "InputDevice"
        Identifier      "stylus"
        Driver          "wacom"
        Option          "Device"                "/dev/ttyS0"
        Option          "InputFashion"          "Pen"
        Option          "Name"                  "c100"
        Option          "ForceDevice"           "ISDV4"
        Option          "SendCoreEvents"        "true"
        Option          "Type"                  "stylus"
        Option          "Mode"                  "absolute"
        Option          "Vendor"                "Wacom"
        Option          "TopX"                  "0"
        Option          "TopY"                  "0"
        Option          "BottomX"               "49152"
        Option          "BottomY"               "36864"
EndSection

Section "InputDevice"
        Identifier      "cursor"
        Driver          "wacom"
        Option          "Device"                "/dev/ttyS0"
        Option          "InputFashion"          "Tablet"
        Option          "Name"                  "c100"
        Option          "ForceDevice"           "ISDV4"
        Option          "SendCoreEvents"        "true"
        Option          "Type"                  "cursor"
        Option          "Mode"                  "absolute"
        Option          "Vendor"                "Wacom"
        Option          "TopX"                  "0"
        Option          "TopY"                  "0"
        Option          "BottomX"               "49152"
        Option          "BottomY"               "36864"
EndSection

Section "InputDevice"
        Identifier      "eraser"
        Driver          "wacom"
        Option          "Device"                "/dev/ttyS0"
        Option          "InputFashion"          "Eraser"
        Option          "Name"                  "c100"
        Option          "ForceDevice"           "ISDV4"
        Option          "SendCoreEvents"        "true"
        Option          "Type"                  "eraser"
        Option          "Mode"                  "absolute"
        Option          "Vendor"                "Wacom"
        Option          "TopX"                  "0"
        Option          "TopY"                  "0"
        Option          "BottomX"               "49152"
        Option          "BottomY"               "36864"
EndSection


Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller" 
        Driver          "intel"
        Option          "Tiling"        "true"
EndSection

Section "Screen"
        Identifier      "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller" 
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           32
                Modes           "1024x768" "1280x1024" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
        InputDevice     "cursor"
        InputDevice     "stylus"
        InputDevice     "eraser"
EndSection

Section "ServerFlags"
        Option          "DontZap"                       "off"
        Option          "DontVTSwitch"                  "off"
        Option          "DontZoom"                      "off"
        Option          "DisableVidModeExtension"       "off"
        Option          "VTSysReq"                      "on"
        Option          "PC98"                          "off"
        Option          "AutoAddDevices"                "off"
        Option          "AutoEnableDevices"             "off"
        Option          "DefaultServerLayout"           "Default Layout"
EndSection

Section "DRI"
        Mode    0666
EndSection
The bug seems to be related to the 3.2.1 version only. The 3.3.0 version of LibreOffice 
works correctly on the identical setup.


-- System Information:
Debian Release: 6.0
  APT prefers oldstable
  APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32.28 (SMP w/2 CPU cores)
Locale: LANG=de_DE.iso-8859-1, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages openoffice.org-impress depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib 
ii  libgcc1                       1:4.4.5-8  GCC support library
ii  libstdc++6                    4.4.5-8    The GNU Standard C++ Library v3
pn  openoffice.org-core           <none>     (no description available)
pn  openoffice.org-draw           <none>     (no description available)

openoffice.org-impress recommends no packages.

openoffice.org-impress suggests no packages.

--- End Message ---
--- Begin Message --- 
Version: 1:3.4.0~ooo340m1-7+rm

Dear submitter,

as the package openoffice.org has just been removed from the Debian archive
unstable we hereby close the associated bug reports.  We are sorry
that we couldn't deal with your issue properly.

For details on the removal, please see http://bugs.debian.org/706870

The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.

This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
ftpmaster@debian.org.

Debian distribution maintenance software
pp.
Ansgar Burchardt (the ftpmaster behind the curtain)

--- End Message ---
Reply to: