Re: Re:Re: SOM
amigo... assim vc até me ofende, se o problema fosse facil assim eu ja teria
resolvido... ehhehehehe
:)
----- Original Message -----
From: Alex <aechiara@pinga.eep.br>
To: Rodrigo <r_marchi@zaz.com.br>
Cc: <debian-news-portuguese@lists.debian.org>
Sent: Friday, October 06, 2000 10:23 AM
Subject: Re:Re: SOM
>
> outros sons tocam normalmente ???
> se tocar eh problema com o seu player
>
> t+
> []s
>
> ------------------------------------------------------
> [aechiara@pinga]~$ rm -rf *
> ^C^C^C
> [aechiara@pinga]~$ ls -l
> total 0
> [aechiara@pinga]~$ Ahhhh ........
> bash: Ahhhh: command not found
> [aechiara@pinga]~$ logout
> Connection to pinga closed.
>
> /"\
> \ /
> X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
> / \ CAMPANHA DA FITA ASCII - CONTRA MAIL EM HTML
>
> Linux ... a nice place to live
> *******************************************
> * Alex Eduardo Chiaranda *
> * mail: aechiara@eep.br *
> * aechiara@merconet.com.br *
> * aechiara@fazenda.sp.gov.br *
> * Pagina => http://www.eep.br/~aechiara *
> * ICQ => UIN 13070511 *
> * 4o Ano de Ciencia da Computacao *
> * Escola de Engenharia de Piracicaba *
> * Piracicaba - SP *
> *******************************************
>
> On Thu, 5 Oct 2000, Rodrigo wrote:
>
> > oi.... esse manual eu usei em totas as distribuições baseadas em Red Hat
e
> > em todas funcionarão, minha placa eh a 8330 (isa), e so pra dizer q o
manual
> > naum funciona acontece q eu consigo configurar tudo beleza so q quando
eu
> > vou tocar uma mp3 ele simplesmente fica repetindo o primeiro segundo da
> > musica, isso acontece com qualquer arquivo wav, mid.....
> > muito estranho.....
> > ;]
> > Sent: Thursday, October 05, 2000 3:23 PM
> > Subject: Re: SOM
> >
> >
> > > Fala Rodrigo,
> > > o tutorial que voce ta usando é pra 8330 (q é ISA).
> > > A sua placa é 8338 ou 8330?
> > > Um abraço, PH
> > > >
> > > > oi pessoal eu to curtindo o debian pacas.... eu costumava usar o red
hat
> > por
> > > > isso tem algumas coisas q eu costumva fazer q estão dificeis de
serem
> > > > adaptada
> > > > por exemplo o som eu sempre usei o manual do kernel mais naum esta
dando
> > > > certo no debian potato aqui esta o manual q vem com o kernel:
> > > >
> > > >
> > > > How to enable CMI 8330 (SOUNDPRO) soundchip on Linux
> > > > ------------------------------------------
> > > > Stefan Laudat <Stefan.Laudat@asit.ro>
> > > >
> > > > [Note: The CMI 8338 is unrelated and right now unsupported]
> > > >
> > > >
> > > > In order to use CMI8330 under Linux you just have to use a proper
> > > > isapnp.conf, a good isapnp and a little bit of patience. I use
isapnp
> > 1.17,
> > > > but
> > > > you may get a better one I guess at
> > > > http://www.roestock.demon.co.uk/isapnptools/.
> > > >
> > > > Of course you will have to compile kernel sound support as module,
as
> > shown
> > > > below:
> > > >
> > > > CONFIG_SOUND=m
> > > > CONFIG_SOUND_OSS=m
> > > > CONFIG_SOUND_SB=m
> > > > CONFIG_SOUND_ADLIB=m
> > > > CONFIG_SOUND_MPU401=m
> > > > # Mikro$chaft sound system (kinda useful here ;))
> > > > CONFIG_SOUND_MSS=m
> > > >
> > > > The /etc/isapnp.conf file will be:
> > > >
> > > > <snip below>
> > > >
> > > >
> > > > (READPORT 0x0203)
> > > > (ISOLATE PRESERVE)
> > > > (IDENTIFY *)
> > > > (VERBOSITY 2)
> > > > (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
> > > > (VERIFYLD N)
> > > >
> > > >
> > > > # WSS
> > > >
> > > > (CONFIGURE CMI0001/16777472 (LD 0
> > > > (IO 0 (SIZE 8) (BASE 0x0530))
> > > > (IO 1 (SIZE 8) (BASE 0x0388))
> > > > (INT 0 (IRQ 7 (MODE +E)))
> > > > (DMA 0 (CHANNEL 0))
> > > > (NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}")
> > > > (ACT Y)
> > > > ))
> > > >
> > > > # MPU
> > > >
> > > > (CONFIGURE CMI0001/16777472 (LD 1
> > > > (IO 0 (SIZE 2) (BASE 0x0330))
> > > > (INT 0 (IRQ 11 (MODE +E)))
> > > > (NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}")
> > > > (ACT Y)
> > > > ))
> > > >
> > > > # Joystick
> > > >
> > > > (CONFIGURE CMI0001/16777472 (LD 2
> > > > (IO 0 (SIZE 8) (BASE 0x0200))
> > > > (NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}")
> > > > (ACT Y)
> > > > ))
> > > >
> > > > # SoundBlaster
> > > >
> > > > (CONFIGURE CMI0001/16777472 (LD 3
> > > > (IO 0 (SIZE 16) (BASE 0x0220))
> > > > (INT 0 (IRQ 5 (MODE +E)))
> > > > (DMA 0 (CHANNEL 1))
> > > > (DMA 1 (CHANNEL 5))
> > > > (NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
> > > > (ACT Y)
> > > > ))
> > > >
> > > >
> > > > (WAITFORKEY)
> > > >
> > > > <end of snip>
> > > >
> > > > The module sequence is trivial:
> > > >
> > > > /sbin/insmod soundcore
> > > > /sbin/insmod sound
> > > > /sbin/insmod uart401
> > > > # insert this first
> > > > /sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1
> > > > # The sb module is an alternative to the ad1848 (Microsoft Sound
System)
> > > > # Anyhow, this is full duplex and has MIDI
> > > > /sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330
> > > >
> > > >
> > > >
> > > > Alma Chao <elysian@ethereal.torsion.org> suggests the following
> > > > /etc/conf.modules:
> > > >
> > > > alias sound ad1848
> > > > alias synth0 opl3
> > > > options ad1848 io=0x530 irq=7 dma=0 soundpro=1
> > > > options opl3 io=0x388
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > To UNSUBSCRIBE, email to
debian-news-portuguese-request@lists.debian.org
> > > > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> > > >
> > > >
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to
debian-news-portuguese-request@lists.debian.org
> > > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> > >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-news-portuguese-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
> >
>
Reply to: