Bug#1002980: linuxptp: providing time-daemon makes it impossible to install alongside chrony or other NTP servers
Package: linuxptp
Version: 3.1.1-2
Severity: normal
Since version 3.1.1-2, linuxptp now provides the "time-daemon" virtual
package; this makes it impossible to install both PTP and NTP servers
side-by-side on the same system, even though chrony and ntpd are both
designed to work alongside linuxptp.
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (102, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.15.7 (SMP w/24 CPU threads)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_CPU_OUT_OF_SPEC, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linuxptp depends on:
ii libc6 2.33-1
linuxptp recommends no packages.
linuxptp suggests no packages.
-- Configuration Files:
/etc/linuxptp/ptp4l.conf changed:
[global]
twoStepFlag 1
slaveOnly 0
socket_priority 0
priority1 128
priority2 128
domainNumber 0
clockClass 248
clockAccuracy 0xFE
offsetScaledLogVariance 0xFFFF
free_running 0
freq_est_interval 1
dscp_event 0
dscp_general 0
dataset_comparison ieee1588
G.8275.defaultDS.localPriority 128
maxStepsRemoved 255
logAnnounceInterval 1
logSyncInterval 0
operLogSyncInterval 0
logMinDelayReqInterval 0
logMinPdelayReqInterval 0
operLogPdelayReqInterval 0
announceReceiptTimeout 3
syncReceiptTimeout 0
delayAsymmetry 0
fault_reset_interval 4
neighborPropDelayThresh 20000000
masterOnly 0
G.8275.portDS.localPriority 128
asCapable auto
BMCA ptp
inhibit_announce 0
inhibit_delay_req 0
ignore_source_id 0
assume_two_step 0
logging_level 6
path_trace_enabled 0
follow_up_info 0
hybrid_e2e 0
inhibit_multicast_service 0
net_sync_monitor 0
tc_spanning_tree 0
tx_timestamp_timeout 1
unicast_listen 0
unicast_master_table 0
unicast_req_duration 3600
use_syslog 1
verbose 0
summary_interval 6
kernel_leap 1
check_fup_sync 0
pi_proportional_const 0.0
pi_integral_const 0.0
pi_proportional_scale 0.0
pi_proportional_exponent -0.3
pi_proportional_norm_max 0.7
pi_integral_scale 0.0
pi_integral_exponent 0.4
pi_integral_norm_max 0.3
step_threshold 0.0
first_step_threshold 0.00002
max_frequency 900000000
clock_servo ntpshm
sanity_freq_limit 200000000
ntpshm_segment 0
msg_interval_request 0
servo_num_offset_values 10
servo_offset_threshold 0
write_phase_mode 0
transportSpecific 0x0
ptp_dst_mac 01:1B:19:00:00:00
p2p_dst_mac 01:80:C2:00:00:0E
udp_ttl 1
udp6_scope 0x0E
uds_address /var/run/ptp4l
clock_type OC
network_transport UDPv4
delay_mechanism Auto
time_stamping software
tsproc_mode filter
delay_filter moving_median
delay_filter_length 10
egressLatency 0
ingressLatency 0
boundary_clock_jbod 0
productDescription ;;
revisionData ;;
manufacturerIdentity 00:00:00
userDescription ;
timeSource 0xA0
/etc/linuxptp/timemaster.conf changed:
[timemaster]
ntp_program chronyd
[chrony.conf]
include /etc/chrony/chrony.conf
[ntp.conf]
includefile /etc/ntp.conf
[ptp4l.conf]
[chronyd]
path /usr/sbin/chronyd
[ntpd]
path /usr/sbin/ntpd
options -u ntp:ntp -g
[phc2sys]
path /usr/sbin/phc2sys
[ptp4l]
path /usr/sbin/ptp4l
-- no debconf information
Reply to: